Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Morgane Bass Button  (Read 725 times)

0 Members and 1 Guest are viewing this topic.

steveh

  • Member
  • *
  • Offline Offline
  • Posts: 9
Hohner Morgane Bass Button
« on: May 02, 2021, 11:09:15 AM »

Playing my D/G Hohner Morgane yesterday, I noticed a problem with the G/D Chord bass button.
There seemed to be very little resistance when this bass button was pushed and on release, it didn’t spring closed.
My initial thought was that I had a broken spring; however, when I took the instrument apart this morning, the spring looks OK. My experience with these things is somewhat limited but I wouldn’t expect the spring to just lose its tension rather than break.
Has anyone had a similar problem? Could it be something other than the spring? Should I just change the spring and does it make sense to change all 4 on the same rod at the same time?
Thanks.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Hohner Morgane Bass Button
« Reply #1 on: May 02, 2021, 11:41:08 AM »

Try compressing the spring by pushing the moving part with the end of a screwdriver or  other suitable implement. You may find it's become very weak without actually breaking yet, which means it will break very soon.

Also check carefully that the rods/levers are moving correctly and in the same way as for other buttons. Sometimes the pivot end of a lever comes loose, though if yours is one of four on a shared axle rod this doesn't look like the cause of the problem, or they'd all do the same.

In my limited experience this kind of failure in a spring is quite random and the other three springs may be perfectly OK, but I'm not a proper melodeon fettler.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner Morgane Bass Button
« Reply #2 on: May 02, 2021, 11:48:50 AM »

Try compressing the spring by pushing the moving part with the end of a screwdriver or  other suitable implement. You may find it's become very weak without actually breaking yet, which means it will break very soon.

Also check carefully that the rods/levers are moving correctly and in the same way as for other buttons. Sometimes the pivot end of a lever comes loose, though if yours is one of four on a shared axle rod this doesn't look like the cause of the problem, or they'd all do the same.

In my limited experience this kind of failure in a spring is quite random and the other three springs may be perfectly OK, but I'm not a proper melodeon fettler.
As a semi-proper fettler all the above is spot on.

steveh

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner Morgane Bass Button
« Reply #3 on: May 02, 2021, 07:00:57 PM »

Thanks for the advice - it's much appreciated. I'll replace the spring and hopefully all will be well.
Logged

tom f

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 112
Re: Hohner Morgane Bass Button
« Reply #4 on: May 03, 2021, 10:24:54 PM »

It might also be worth just checking that the pallet for that button isn't rubbing on the one next door as it goes up and down.  A colleague of mine with a Morgane had a number of instances of glue failure on his instrument with symptoms very similar to those you are describing.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal