Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows Corners paolo Soprani B/C 1960s  (Read 666 times)

0 Members and 1 Guest are viewing this topic.

theirlandais

  • Member
  • *
  • Offline Offline
  • Posts: 6
Bellows Corners paolo Soprani B/C 1960s
« on: May 04, 2021, 06:53:34 PM »

I'm looking to find the model number for the bellows corners of a typical 2 row 1960s Paolo soprani, they mesure about 19mm each direction and are rounded. I'm also looking for a site where are can buy them, I only need about 3 or 4
'
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Bellows Corners paolo Soprani B/C 1960s
« Reply #1 on: May 04, 2021, 06:57:47 PM »

I don't know if part numbers will help you as Paolo Soprani is a different company today.  But measuring the arm length as you have, and the radius of the curve (use a compass to match it, and measure the radius of the circle needed) you can source a close if not identical match.  CGM, Bossetto on US eBay, and Carini are the first options that come to mind.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Bellows Corners paolo Soprani B/C 1960s
« Reply #2 on: May 04, 2021, 08:23:00 PM »

I'm looking to find the model number for the bellows corners of a typical 2 row 1960s Paolo soprani, they mesure about 19mm each direction and are rounded. I'm also looking for a site where are can buy them, I only need about 3 or 4
'
I bought some recently from Bossetto and got this chart if it helps, 35me and 35to are the only two with a 20mm size. I am trying to fix an older Columbia accordion the corners are I got match perfectly to the chart and to the ones I needed as seen in the chart, trouble is they don’t match thickness even after compression.
Not sure but why but there not the same, me thinks.
If you find you need 44ap let me know, I have a few now that I don’t see a need for. 
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Corners paolo Soprani B/C 1960s
« Reply #3 on: May 04, 2021, 08:39:18 PM »

When I've replaced corners on 1950s/60s/70s Paolo Sopranis I've usually not found an exact match from the new styles that are available from Italy.  I couldn't match the shape exactly and the colour of the modern ones made of stainless steel is a bit garish compared with the originals which are usually nickel.   I found some used ones which were a better match.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal