Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Glues (again)  (Read 2674 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Glues (again)
« on: May 13, 2021, 08:35:26 AM »

One of my favourite topics...glue.
Following Rees' recommendation a few years ago I use Bostik Solvent Free contact adhesive to attach valves. Its not a stringy as the Evo-Stik contact glue and stays useable for longer. Sadly it is no longer in production (in the UK). I called Bostik to ask (we don’t make it any more, they told me, unapologetically, and did not recommend an alternative) and I’ve not been able to buy up any remaining supplies.  I may follow Theo's example and buy some of the purpose made stuff from Carini.
The Evo-Stik solvent free glue I bought recently is ok but quite a bit thicker than the Bostik version, so not great for valves. I may experiment with it for attaching some bellows tape. Bellows tape has a habit of springing off unless it’s clamped into place until the PVA goes off or gets tacky. Given that I have a decent size can of the Evo-Stick I can afford to smear it around a bit.
On the subject of glue, hide glue is marvellous stuff, but if you want some quickly for (say) attaching pallets, the Titebond liquid hide glue is really very good, when you only want a little bit and don’t want to fire up the glue heater.
Finally...I shall miss Steve FreeReeders comments..he no doubt would have been straight in with his advice and experience..
« Last Edit: May 13, 2021, 08:39:19 AM by RogerT »
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Glues (again)
« Reply #1 on: May 13, 2021, 08:45:38 AM »

I had the same conversation with Bostik last year re. their 80520 Solvent Free clear which may be the same product?  It is pretty incredulous that there is "nothing quite like it" on the market, but there doesn't seem to be.  Presumably one of the components got outlawed or became too expensive to source ?

I actually found a stock listed at a large Department Store in Jordan! of all places and by the power of the WWW hoped to get some sent here but the carriage costs were too expensive to contemplate.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Glues (again)
« Reply #2 on: May 13, 2021, 09:02:27 AM »

Yes, sounds like it Nigel. So what do you use now?

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Glues (again)
« Reply #3 on: May 13, 2021, 09:53:10 AM »

For valves, to metal plates......3M 1099 Vinyl Adhesive, applied via a 5ml Syringe with 18G 1.5'' Blunt Tip Needle (widely available from Amazon - Green needle.  I decant the glue into the syringe from the nozzle and use the (blunt tip) needle to apply the glue. Very controllable ( a bit control freakish! ) but I have the touch of a baby elephant, the hands of a man with 10 thumbs and increasingly cranky eyes for close work!

Logged

Chris Rayner

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 467
Re: Glues (again)
« Reply #4 on: May 13, 2021, 11:14:05 AM »

UHU make three glues which are close to Bostik Clear.  Not expensive, available in small quantities and worth a try I’d say
https://www.uhu.com/en/product-overview?key=2208
« Last Edit: May 17, 2021, 02:41:47 PM by Chris Rayner »
Logged
Elderly amateur musician hoping to stave off dementia by learning to play the melodeon.  Main instrument a Tommy, also D/G and G/C pokerworks,  a single row 2 stop Hohner, and a new addition to the free reedery, a rather splendid Paolo Soprani four voice 120 bass c-system chromatic button accordion.  Very shiny, very loud, and about the same size and weight as a small car.  Now I’ve traded me Benny with (ahem) a cash adjustment, to a three voice 60 bass Castagnari K3.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Glues (again)
« Reply #5 on: May 13, 2021, 11:45:02 AM »

"3M 1099 Vinyl Adhesive"

The bumf says it's drying time is 40 minutes, that seems a long time before the reeds can be tried. Or is it just me missing something?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Glues (again)
« Reply #6 on: May 13, 2021, 01:54:42 PM »

UHU make three glues which are close to Bostik Clear.  Not expensive, available in small quantities and worth I try I’d say
https://www.uhu.com/en/product-overview?key=2208
Ah right. I’ll give it a go. Thanks.

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Glues (again)
« Reply #7 on: May 13, 2021, 03:12:39 PM »

Depending on the precise application, some form of bookbinders glue might fit the bill?

Or here where there is a section devoted to glues for instrument (violin) repair.

« Last Edit: May 13, 2021, 03:20:30 PM by Roger Hare »
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Glues (again)
« Reply #8 on: May 13, 2021, 04:09:08 PM »

Valve glue and glue in general has been covered many times before on here.  I just wanted to flag the loss of Bostik solvent free. Nick Colis-Bird is also a book binder and a world authority on glue (he it was who gave me a hide melting pot)... (:)

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Glues (again)
« Reply #9 on: May 16, 2021, 04:32:30 PM »

Valve glue and glue in general has been covered many times before on here.  I just wanted to flag the loss of Bostik solvent free. Nick Colis-Bird is also a book binder and a world authority on glue (he it was who gave me a hide melting pot)... (:)
Oh, sorry. Does that mean I shouldn't post about glue again?
« Last Edit: May 16, 2021, 04:34:15 PM by Roger Hare »
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glues (again)
« Reply #10 on: May 16, 2021, 04:49:58 PM »

And any question tends to have a range of different answers.
Anyway this is a *discussion* forum, not a reference site.  It is possible to search out old topics, but that’s not its primary purpose.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glues (again)
« Reply #11 on: May 16, 2021, 04:54:03 PM »

Depending on the precise application, some form of bookbinders glue might fit the bill?

Or here where there is a section devoted to glues for instrument (violin) repair.

Bookbinders materials can be just the ticket for applications involving bookbinding materials eg leather, paper, card and textiles, but for valves (plastic or leather) to metal you need something different.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Glues (again)
« Reply #12 on: May 16, 2021, 05:41:52 PM »

I have found pearl glue / hide glue works well for attaching leather valves to zinc plates and it doesn't string.  . Both zinc (surface corrosion film) and leather have a surface which provides a good key for this glue, I am not convinced that the bond would be so effective if I was glueing the microscopically smoother surfaces of Plastic and Aluminium oxide.

I am happy with gum arabic for bellows tapes...but I am not risking my 90+ year old posh box in the rain.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glues (again)
« Reply #13 on: May 16, 2021, 05:49:16 PM »

Depending on the precise application, some form of bookbinders glue might fit the bill?

Or here where there is a section devoted to glues for instrument (violin) repair.

Lots of useful information in those links.

I use starch paste mixed with equal parts of pva to glue leather to felt to make pallet facing.  I tried pva on it's own or diluted with water but both dry too quickly when I do a whole skin.  Adding paste extends the working time so there is plenty of opportunity to get the glue well spread with a nice even film of glue and no gaps,

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Glues (again)
« Reply #14 on: May 16, 2021, 08:19:24 PM »

Great tip Theo, I shall try that. Do you mean wallpaper paste?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glues (again)
« Reply #15 on: May 16, 2021, 08:27:53 PM »

No, that is usually methyl cellulose.  I use rice starch from a bookbinders supplier which comes as a powder that mixes with cold water. I believe you can also use wheat flour which needs to be heated with water, but I've not tried that.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Glues (again)
« Reply #16 on: May 16, 2021, 08:35:30 PM »

Thanks, rice starch it is then.
Would the same mixture work on bellows tape?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Glues (again)
« Reply #17 on: May 16, 2021, 09:18:26 PM »

I've tried, but found it doesn't give a quick enough grab, so it's hard to get the tape to stay folded in place.  It does depend a bit on what tape you use.  The usual Italian stuff id quite thick and doesn't fold readily.  I occasionally use Rexine on vintage boxes because it's appearance is a better match.  It is thinner and more flexible, so the paste/pva mix might work well in that case.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Glues (again)
« Reply #18 on: May 16, 2021, 10:44:48 PM »

Valve glue and glue in general has been covered many times before on here.  I just wanted to flag the loss of Bostik solvent free. Nick Colis-Bird is also a book binder and a world authority on glue (he it was who gave me a hide melting pot)... (:)
Oh, sorry. Does that mean I shouldn't post about glue again?
No, not at all. No offence intended.

V interested in Theo's pallet facing glue concoction. Actually, I have used a spray glue to attach felt to leather. I think it’s used to stick backing to carpet  (:) it's like a spray version of contact adhesive so gives instant complete coverage and is super sticky. Gloves and a big sheet of newspaper are essential. PVA sets quite hard in comparison and it is tricky to spread onto felt (I tend to use too much).
« Last Edit: May 16, 2021, 10:54:35 PM by RogerT »
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Glues (again)
« Reply #19 on: May 17, 2021, 05:19:08 AM »

For a real grab and a flexible glue try tapioca starch powder and about 20% wheat flour by volume.
Make a volume of about 1 tablespoon of powder, add a couple of pinches of salt as a preservative, put in half quart bowl , add about 2 tablespoons of cold water and stir to make a paste.
Boil a tea kettle of water, slowly add water to bowl while quickly stirring the powder slurry to keep it in suspension. When you have added about a cup of water the mixture will start turning from cloudy to clear keep adding water till you have about 2 cups or the mixture is about the consistency of tomato soup.

It will thicken a bit as it cools so make it a bit thinner than you want it.
The texture is very slimy and sticky and has good tack, i use this for paper mache and have masks made of it that are 30 years old. It is flexible and will not crack. Refrigerate if not using right away, use within 48 hrs.
This is also the mixture I used for rolling rocket casings when I used to do pyrotechnics.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal