Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: International -Vienna Type - 6Bass Broken Spring in bass machine...  (Read 667 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039

One of the buttons went down and didn't come back up.....looks like a broken spring. Photo will have to wait till I work out how to get photos off the new phone.

This is an old (catalogue evidence from 1903) model though may have stayed in production till the demise of Dienst in 1935.

Wooden  block slotted for wooden action levers is glued in . there appear to be trigger springs under the action levers...and the arm of one of these has broken off.

This looks like it's going to be a slow and high risk job.

Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039

Now I see that the springsare inserted between the cheeks of the lever slots.... It turns out that neither of the A springs are original.
A substitute appears to have been wound from hard brass wire- this isn't the first time I have seen brass wire used in replacement springs though they invariably feel stiffer and soggier than the steel originals.
Got the remains out. extracted a sustitute from a PA keyboard,,,,and pushed it too far in. Aaaagh!!! Now how do I get  that spring back out....
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.

Hopefully, you've got a slight curve on one leg of the spring. You could then make a hook to go past the end of the other leg and carefully pull it outwards until you can get something in between the sharp spring end and the slot, to stop that leg digging in to the wood as you extract the whole spring.
Best of luck!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039

Hopefully, you've got a slight curve on one leg of the spring. You could then make a hook to go past the end of the other leg and carefully pull it outwards until you can get something in between the sharp spring end and the slot, to stop that leg digging in to the wood as you extract the whole spring.
Best of luck!

Aye. I have a curve on the spring alright....the wrong sort of curve. When I knock off for the day I'll have another attempt.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039

Success! - and relief

The tool that finally got it out was a pair of old "BB" horologists' tweezers (blunter and heavier than the NN tweezers used for watch work).

The second time round the replacement spring came from the bass machine of one of those despised Alvari PA's .... which when I looked at it was  identical in construction to the International bass machine.

Inserted the spring manipulating it with the BB tweezers and a flat blade precision screwdriver. ( & Thanks for all the advice) (:)
« Last Edit: May 30, 2021, 12:33:56 AM by Peadar »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

A very useful tool for manipulating springs is an artery clamp.    It works like heavy tweezers with a locking mechanism.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal