Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: bellow frame  (Read 2337 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
bellow frame
« on: May 28, 2021, 06:54:53 PM »

Paolo Soprani,,, what can i do about this ?? maybe a little soak in hot water, and squeeze ??or which is better ??
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: bellow frame
« Reply #1 on: May 28, 2021, 07:15:38 PM »

I’d be inclined to replace that end with a straight piece of timber.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: bellow frame
« Reply #2 on: May 28, 2021, 07:30:55 PM »

I’d be inclined to replace that end with a straight piece of timber.

it would be an easy job, but I am a bad artist (:)
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: bellow frame
« Reply #3 on: May 28, 2021, 07:56:06 PM »

I’d be inclined to replace that end with a straight piece of timber.
Indeed, butt joints, no problem really.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: bellow frame
« Reply #4 on: May 28, 2021, 07:56:51 PM »

Cut off as much as you can without doing damage to the decorative inlay. I use strong double sided tape in such a case and my table saw. Then glue it back on to a straight piece of wood. 
« Last Edit: May 28, 2021, 08:02:47 PM by diatonix »
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: bellow frame
« Reply #5 on: May 28, 2021, 08:09:14 PM »

thanks  (:)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bellow frame
« Reply #6 on: May 28, 2021, 08:26:27 PM »

soak in hot water,
No that will risk the marquetry falling apart.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: bellow frame
« Reply #7 on: May 28, 2021, 08:53:52 PM »

soak in hot water,
No that will risk the marquetry falling apart.


Ok Thanks,    :(this kind of thing I don't really know about ,, i can do a lot of damage :(
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: bellow frame
« Reply #8 on: May 28, 2021, 08:54:38 PM »

No that will risk the marquetry falling apart.

Marquetry! Of course, that's what it's called...
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: bellow frame
« Reply #9 on: May 28, 2021, 08:56:51 PM »

soak in hot water,
No that will risk the marquetry falling apart.

If the marquetry did fall off the supporting piece could it simply be glued onto a replacement piece of timber (i.e., would it be simple to do)?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: bellow frame
« Reply #10 on: May 28, 2021, 09:05:13 PM »

If the marquetry did fall off the supporting piece could it simply be glued onto a replacement piece of timber (i.e., would it be simple to do)?
Better leave it as is still attached to a 1mm or so slice of original wood, which then can be glued on to a new straight piece. Quick & easy.
'
« Last Edit: May 28, 2021, 09:14:19 PM by diatonix »
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: bellow frame
« Reply #11 on: May 28, 2021, 09:13:55 PM »

If the marquetry did fall off the supporting piece could it simply be glued onto a replacement piece of timber (i.e., would it be simple to do)?
Better leave it as is still attached to a 1mm or so piece of original wood, which then can be glued on to a new straight piece. Quick & easy.
'

maybe that's the best way (:)
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: bellow frame
« Reply #12 on: May 28, 2021, 09:41:39 PM »

Quote
Marquetry! Of course, that's what it's called...

Yes, but 'decorative inlay' was fine. (in my opinion anyway...)
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: bellow frame
« Reply #13 on: May 28, 2021, 10:56:27 PM »

If the marquetry did fall off the supporting piece could it simply be glued onto a replacement piece of timber (i.e., would it be simple to do)?
Better leave it as is still attached to a 1mm or so slice of original wood, which then can be glued on to a new straight piece. Quick & easy.
'
This sounds like the best idea if the cut on the table saw goes well, curved wood and straight blade , you would have to keep it tight to fence some how with a good feather board set up. Not sure how I would do this with such a short piece of timber?

I was wondering if a plunge router could cut it using a jig to follow curve in the wood, you might not even have to remove it from bellows to cut it?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bellow frame
« Reply #14 on: May 28, 2021, 11:11:00 PM »

First glue it onto a thick stiff piece of wood do it is forced into being perfectly straight.  Then cut on the table saw.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: bellow frame
« Reply #15 on: May 29, 2021, 08:05:00 AM »

FWIW Carini has a selection of inlay strips. You could check to see if there is a matching one.. or you could try printing a colour photo onto cartridge paper and then glue and lacquer that onto the replacement end. That is probably easier than painting a replica...though if you did paint a replica I suggest using acrylic paints.
« Last Edit: May 29, 2021, 08:08:18 AM by RogerT »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bellow frame
« Reply #16 on: May 29, 2021, 09:24:09 AM »

Having thought about the problem of the curved end here is a better method.

The two important aspects of this repair are to get the end of the bellows frame straight and to do it while preserving the original marquetry finish and patina. Here is how I would do it.  This is a method I originally learned from Colin Dipper for repairing a warped Reed pan in a concertina.

1) remove the end piece from the frame and make it straight temporarily by laying it concave side down on a damp cloth. That may take half an hour air several hours depending on the wood.

2) make two saw cuts on the inside surface in the long direction of the piece. A table saw is the best tool for this.

3) obtain some hardwood, or aircraft ply of a thickness that is a close fit (but not tight) in the saw cuts.

4)  glue the thin strips into the saw cuts and clamp carefully so the piece is straight while the glue dries.

5) clean up the inside surface and glue back into the bellows frame.

This will make a permanently stable repair.




Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: bellow frame
« Reply #17 on: May 29, 2021, 11:01:05 AM »

Having thought about the problem of the curved end here is a better method.

The two important aspects of this repair are to get the end of the bellows frame straight and to do it while preserving the original marquetry finish and patina. Here is how I would do it.  This is a method I originally learned from Colin Dipper for repairing a warped Reed pan in a concertina.

1) remove the end piece from the frame and make it straight temporarily by laying it concave side down on a damp cloth. That may take half an hour air several hours depending on the wood.

2) make two saw cuts on the inside surface in the long direction of the piece. A table saw is the best tool for this.

3) obtain some hardwood, or aircraft ply of a thickness that is a close fit (but not tight) in the saw cuts.

4)  glue the thin strips into the saw cuts and clamp carefully so the piece is straight while the glue dries.

5) clean up the inside surface and glue back into the bellows frame.

This will make a permanently stable repair.

Now that is clever. You can always rely on Mr Dipper for crafty fixes.
Like the time he advised me to use organic honey to fix loose stops in enlarged holes by applying organic honey.
This worked until I went to a an outside session on a sunny day - melodeon covered in wasps!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bellow frame
« Reply #18 on: May 29, 2021, 11:19:56 AM »

.. or you could try printing a colour photo onto cartridge paper and then glue and lacquer that onto the replacement end.

Quote
Seagoon MCC

Seagoon: This is it - build a full-scale cardboard replica of England, anchor it off the coast of Germany, then, when the Germans have invaded it, we tow it out to sea... and pull the plug out.

Seagoon: Now, which one of you two is Mr. Crun?
Minnie: I'm Miss Bannister.
Seagoon: Never mind who you are. Which one is Henry Crun?
Minnie: Don't tell him, Henry!
Henry: No! I'm not going to tell him, Min. In any case... in any case, why do you want to know my name?
Seagoon: Mr. Crun! You make cardboard models and scenery.
Henry: If I was Mr. Crun... which I'm not admitting... yes, I do.

Apologies to anyone not familar with 1950s/60s BBC radio
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: bellow frame
« Reply #19 on: May 29, 2021, 06:36:37 PM »

Having thought about the problem of the curved end here is a better method.

The two important aspects of this repair are to get the end of the bellows frame straight and to do it while preserving the original marquetry finish and patina. Here is how I would do it.  This is a method I originally learned from Colin Dipper for repairing a warped Reed pan in a concertina.

1) remove the end piece from the frame and make it straight temporarily by laying it concave side down on a damp cloth. That may take half an hour air several hours depending on the wood.

2) make two saw cuts on the inside surface in the long direction of the piece. A table saw is the best tool for this.

3) obtain some hardwood, or aircraft ply of a thickness that is a close fit (but not tight) in the saw cuts.

4)  glue the thin strips into the saw cuts and clamp carefully so the piece is straight while the glue dries.

5) clean up the inside surface and glue back into the bellows frame.

This will make a permanently stable repair.
Good way of doing it!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal