Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: A question for professional fettlers  (Read 1626 times)

0 Members and 2 Guests are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
A question for professional fettlers
« on: June 24, 2021, 05:50:11 PM »

I've touched upon this in the past, but I'd like to get some more comprehensive answers from professional fettlers on this matter.  Although this is applicable to all kinds of accordions, my query is geared more towards those who overhaul piano accordions.

As someone who offers tuning and repair work on accordions/harmoniums as (one) business, I pride myself on doing an excellent job.  I don't cut corners, I use the proper materials, I take the time to do things right to the best of my knowledge and abilities.  If I come across something that I don't feel qualified or confident to tackle, I make sure to direct clients to someone who is.  Paramount to what I do is give any clients a comprehensive diagnosis of the state of their instrument, and then give them options, allowing them to make the most informed decision.  In short, I care about what I do, and I care about the people whose instruments I've been entrusted with.

I get a lot of piano accordions in for a tuning, many of which are full size, 41 treble, 120 bass, three or four voice, etc.  95% of the time, the wax is old.  Depending on how old it is, the wax may be brittle and no longer reliably holding the reedplates in place, and in these cases it is obvious that a complete overhaul is required.  However, most of the time, the wax is old but is still holding the reedplates in position. Running my fingernail along the edge of the wax reveals a pasty white line, a clear indications that the wax is no longer new and can't be melted again, but all the notes are playing and sounding fine.  With a button box, my standard practice is to replace all the wax and valves before doing a tuning in these cases.  With a piano accordion, the expense of doing this is *much* higher.  It becomes a huge investment of time, and therefore a huge investment for the client.

I find myself struggling to decide what to recommend to the client.  In each case I would tell them that the wax is old, and that at some point it will begin to fail.  However, if the instrument is playing fine as it is, and the reedplates are still being held in place with the (old) wax, does it make sense to suggest doing a full tuning without replacing the wax?  I know that there are some cases when the wax seems OK, but then the process of tuning reeds begins to dislodge the plate from the wax (I learned this the hard way once, and then had to go back to the client and tell them that a full overhaul would be required in order to tune), but that's certainly not always so.

I guess I'm wondering what best practice would be.  In many cases, the expense of overhauling an entire full-size PA is not worth it for a client.  In many cases, we could probably do a tuning with the wax as is and everything would be OK...for a time.  I currently have a full-size Guerrini in my workshop for a tuning - the insides are immaculate, with all the leather valves perfectly flat, all the notes sounding fine, etc.  However, running my finger along the wax shows that it is old.  I hesitate telling the client that a tuning can only be done with a full overhaul.  I'm not looking to take advantage of anyone, but I do want to follow best practices in these situations.  Can anyone who works on PAs give me their opinions or experiences in this regard?  Is it best that I *always* recommend replacing wax as soon as it shows signs of getting old?  Often I will tell people to just keep playing it as is, and that if they want it tuned, that an overhaul is required.  I'm just not sure anymore..!
« Last Edit: June 24, 2021, 05:54:41 PM by mselic »
Logged
C#/D player

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: A question for professional fettlers
« Reply #1 on: June 24, 2021, 06:30:00 PM »

If the wax seems to be holding the reeds and does not break of in pieces when poked with a knife I leave it alone (Honers are a different story ,wax can be soft and greasy but reeds will be falling out.
If it seems iffy and the reeds are still stable I will sometimes do a "top wax". This consists of removing the wax down to metal and wood on the top edge and bottom near the rivet. This really only makes sense if the valves are generally good. If you are having to pull a 1/4 of the reeds to replace inside valves it makes little sense.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: A question for professional fettlers
« Reply #2 on: June 24, 2021, 07:21:40 PM »

If the wax breaks away in big, clean chunks, I will always change it for new.  On the Guerrini currently in the workshop, the wax that is scraped away becomes powder.

So if I follow your suggestion correctly, you're recommending replacing all the wax on the top and bottom of the plates, leaving the strip in-between the plates untouched?
Logged
C#/D player

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: A question for professional fettlers
« Reply #3 on: June 25, 2021, 01:24:54 AM »

Yes, if the valves are good and the reeds are not actually loose. Pointless otherwise.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Jozz

  • Good talker
  • **
  • Offline Offline
  • Posts: 97
  • Greetings from the Netherlands!
    • Stichting Bon Artz
Re: A question for professional fettlers
« Reply #4 on: June 25, 2021, 08:20:16 AM »

It depends on the situation: the player, the instrument, what will it be used for, how many playing hours, road-worthiness of the solution...etc.

My advice is:
Do not hesitate to discuss at length and tell the whole story.

I'm not a repairman, but I was in your clients position a while ago. Ending up in much the same discussion about full overhauls vs. comprosing / patching up.

I'd brought in an attic find (smaller box but still). This needed fixing up to become my lightest box for live use.

I found it very pleasant to hear the ins and outs of the real deal. Before the discussion I never had thought about how long a tuning holds with full overhaul vs. compromising. Especially since I wanted a tighter tremolo for a specific purpose. Also we discussed how much playing hours this thing was going to get, and that it didn't make sense for me to have it break down halfway in a set one day.

Of course the other side was the money involved: the overhaul (500) would cost 10 times the purchase price (50).

In the end I opted for the full overhaul. This also gave me a form of warranty.

This was good in my situation. I totally agree a full-size PA for a recreative player at home...he/she needs to be emotionally attached to the instrument to justify!
Logged
Stichting Bon Artz - We present and support authentic music and small-scale performance arts.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: A question for professional fettlers
« Reply #5 on: July 04, 2021, 07:53:33 AM »

I typically give a breakdown of what is absolutely needed for playability and what would be needed be completely rebuilt.
The cost of a full wax and a top wax is about 3 to 1 as it is a lot more work. I have instruments come in on trade that i did 20 years ago that got a top wax and are still doing fine since I go through them before selling them again.
 I'm also typically backed up about 4-6 months on major overhauls so there is no financial benefit for me to create work.
 I am only really bothered when people want work that won't make a problem instrument playable, rebuild a keyboard when the reeds are falling out of the blocks for example.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: A question for professional fettlers
« Reply #6 on: July 09, 2021, 02:24:26 PM »

Again, really from the customer's point of view, a frank discussion explaining the prognosis creates a starting point to discuss what work is appropriate to the situation.  I'm sure we all hope to get a good few years of use out of a repaired or refurbished box.  My guess is that anyone who is using the box for at least semi-professional live performances is likely to opt for the full works as reliability and longevity is paramount to that situation.  There is one of my boxes which had a "partial" job done - the tuner said he'd felt the reeds were brittle, so recommended doing no more than a spot tune.  That was fine for me, it's a Bb/Eb box that I only play quietly at home.  It doesn't have to be A=440 or declubbed.

At I grow older, I now consider that a repair that will last a decade is sufficient to my needs - it'll quite possibly outlive me.  The exception would be my "good" boxes, which I would like to pass on to future players in as new condition.  The "lesser" boxes will, I hope, also go to other players but they can then choose what budget they spend to keep them going.

I start off assuming that the labour in building a new box will be at least half the cost of production.  If I want the thing stripped and rebuilt, it should cost half the price of a new box.  Any saving on that is a compromise and must be balanced against its extended lifespan.  A full rebuild is likely to yield fifty years. Less work might still give it 30 years.  Not a bad return on investment!

Rob.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: A question for professional fettlers
« Reply #7 on: July 10, 2021, 06:26:56 PM »

Repairs will almost always be less that a new instrument, but it often involves more labor than the initial assembly. Think of it like painting a car the first time at a factory, then all the prep sanding and taping off that is needed to do it 20 years later.
 One of the factors in the piano accordion market is the lack of student sized 120 instruments in production and the rarity of vintage italian 72-48-60 bass models in the US.
Often the only source is a rebuilt vintage instrument.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: A question for professional fettlers
« Reply #8 on: July 11, 2021, 01:26:40 PM »

Absolutely, I didn't want to complicate the issue by adding in the cost of disassembly, without causing damage, hand fitting against original jig building, etc.  Suffice to say I was aiming at a ball park feel for the issues involved.  I'm sure that many rebuilt instruments are better than the original after such hand fitting and attention to detail.  I have played a few Hohners which were sublime after a rebuild, reaching a standard of playability which would be one in a million happenstance out of the factory.

Rob.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: A question for professional fettlers
« Reply #9 on: July 11, 2021, 02:04:56 PM »

I was going to concur with Kimric.....it takes as long (sometines longer ) to disassemble an old PA and prepare the reeds for refit/tuning, as the fitting and tuning. But decided this isn’t quite the case with melodeons (unless it’s a 3voice Trichord). But on a 4 voice 120/41 PA the condition of the reeds can make a big difference to the cost..and there are 'undreds of the blighters to individually clean up/revoice etc. PS...this is where an audio book comes in handy.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: A question for professional fettlers
« Reply #10 on: July 11, 2021, 02:54:03 PM »

PS...this is where an audio book comes in handy.
Though sometimes it's hard to avoid trying to retune Stephen Fry.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: A question for professional fettlers
« Reply #11 on: July 11, 2021, 03:10:03 PM »

"retune Stephen Fry."

??????????????????????????
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: A question for professional fettlers
« Reply #12 on: July 11, 2021, 03:19:37 PM »

My tuner picks up the pitch of the narrator if I'm not careful with positioning.😉
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: A question for professional fettlers
« Reply #13 on: July 11, 2021, 06:32:50 PM »

Only when cleaning and non tuning work  (:) and anyway I’m on the Aubrey-Maturin series...superbly read by Ric Jerrom
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal