Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: White Powder  (Read 2337 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
White Powder
« on: July 03, 2021, 08:25:58 PM »

Already I know what some of you are thinking.

But seriously...white corrosion products on the sides of silvery metal covered pallets.

Might be zinc oxide, I suppose, if the alloy of the plate material had so much zinc in it that some of it was free zinc in solid solution. Or something more poisonous?

But how to clean up before putting the new pallet facings on?

Logged

Emily Peabody

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: White Powder
« Reply #1 on: July 03, 2021, 10:19:45 PM »

Would it be sensible to try a very gentle rub with fine sandpaper, with a dry cloth held underneath to catch anything that falls off? One of those masks everyone is wearing these days would probably be a good idea as well.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: White Powder
« Reply #2 on: July 03, 2021, 10:42:11 PM »

 Zinc oxide? If so it’ll be slightly yellow?

Not an infection risk. It’s actually a weak antiseptic 🙂 And an essential element. You need to eat quite a lot for toxicity, but … keep on putting simple salt on your chips 👍
 
« Last Edit: July 03, 2021, 10:46:28 PM by Chris Ryall »
Logged
  _       _    _      _ 

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: White Powder
« Reply #3 on: July 03, 2021, 11:47:16 PM »

Zinc oxide? If so it’ll be slightly yellow?

Not an infection risk. It’s actually a weak antiseptic 🙂 And an essential element. You need to eat quite a lot for toxicity, but … keep on putting simple salt on your chips 👍
 
This stuff is pure white-the corrosion is on the flank of the pallets immediately beside the edges of the leather facings . The metal under the pallet arms is a really bright silvery finish. Too bright for cadmium I think. Lead doesn't make sense either.

Emily - I think it may come down to sandpaper. Something a bit more aggressive than Brasso wadding at any rate.

Thanks both for your suggestions.

P
Logged

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: White Powder
« Reply #4 on: July 04, 2021, 12:01:04 AM »

Peadar, one of my other hobbies is coin collecting, and zinc coins (minted by many countries as an emergency measure during the world wars) are very prone to a white powdery corrosion.

I don't think zinc ever starts off as "silvery" though. At best it is always some tint of gray, aging to black.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: White Powder
« Reply #5 on: July 04, 2021, 07:40:15 AM »

Probably tin plating. The leather can sometimes react with metals depending on how it was tanned.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: White Powder
« Reply #6 on: July 04, 2021, 08:54:15 AM »

Cadmium 😳 Definitely don’t put that on your chips! Causes the notoriously painful イタイイタイ病 “ouch, OUCH!” disease. McDonalds had to recall (google …) 12 million drinking glasses due to surface Cd contamination. We wouldn’t want that to happen to melodeons?

edit: I’m suspect that your local science lab or even public health people might be tempted into analysing it … they like that sort of challenge. We put several mummies, and even a corpse (natural causes) through out CT scanner in my hospital days.
« Last Edit: July 04, 2021, 09:00:00 AM by Chris Ryall »
Logged
  _       _    _      _ 

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: White Powder
« Reply #7 on: July 04, 2021, 10:18:24 AM »

Almost certainly oxidising of a  zinc coating.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: White Powder
« Reply #8 on: July 04, 2021, 02:33:11 PM »

Probably tin plating. The leather can sometimes react with metals depending on how it was tanned.
I had a suspicion that tin might be the element in question.
 No idea what tanning process might have been used in the Leipzig area immediately after the 14-18 war. Dienst however seem to have always used white facing leather on their pallets, whereas I've never seen a Hohner with other than reddish-brown pallet leather. I have two "Wyper Patent" boxes. The other - somewhat further back in the queue for restoration shows (underneath it's protective coating of condensed nicotine) a similar pallet corrosion.

Logged

Rob Lands

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: White Powder
« Reply #9 on: July 05, 2021, 10:11:56 AM »

both zinc oxide and tin oxide are insoluble in water however the former acts as a base and will "dissolve" in acid solution and the latter acts as an acid and will dissolve in an alkaline solution.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: White Powder
« Reply #10 on: July 08, 2021, 07:40:33 PM »

So......Brasso reeks of ammonia. Therefore should be quite good at removing tin oxide. (Rob Lands: Thanks for the chemical expertise...started revising my O level Chemistry from 1974 last night! ....I always knew there was a reason why I didn't throw my notes away))

Heaven only knows what it will do to the pallets...which inevitably got soaked by brasso in the process of rubbing the metal pallet claddings.

I gave them a rub down with 600 grit wet and dry first.....left a smooth but not polished surface. Saga TBC over on the thread below

http://forum.melodeon.net/index.php/topic,27169.0.html

Logged

Rob Lands

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: White Powder
« Reply #11 on: July 09, 2021, 10:38:54 AM »

As you have revised you'll have seen tin is group IV (Carbon group) and just below those nice semi conductors so it really has quite interesting chemical and physical attributes.  Metal/non metal or a bit of both?
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: White Powder
« Reply #12 on: July 09, 2021, 06:24:25 PM »

Tin is a predominantly a metal (think “tinning” the ends of wires).

While it has four outer shell (chemistry) electrons, like carbon, silicon germanium … they are well “out” from the nucleus in shell 5. Basically more likely to wander off, forming Sn++ salts (eg oxide!) conduct etcetera. Carbon is a non conductor, Si and Ge semiconductors, with Ge metallic in colour, tin ditto

Checking out the chemistry, I see that silvery ‘β-tin’ tends to transform spontaneously into ‘α-tin’ at low temperatures, around that of ice. So called “tin pest”.  Allegedly the silver buttons of Napoleon’s soldiers got it in Russia, and fell off (surely apocryphal)? 

But if these plates are “tinned”, and have been very cold for a while, this might explain our issue. The allotrope α-tin has diamond structure, non metalic, and is white and powdery. 👍?
« Last Edit: July 09, 2021, 06:30:01 PM by Chris Ryall »
Logged
  _       _    _      _ 

Rob Lands

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: White Powder
« Reply #13 on: July 10, 2021, 12:55:56 PM »

yep, but I couldn't help but smile as you suggest the problem may be caused by non metallic properties. The beauty of the chemistry of the later rows of p block elements and their compounds.

Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: White Powder
« Reply #14 on: July 10, 2021, 01:03:33 PM »

They are incredibly useful in all facets of life, except restoration of dusty old melodeons 😉
Logged
  _       _    _      _ 

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: White Powder
« Reply #15 on: July 11, 2021, 01:15:49 AM »

Rob (and Chris) - I said I've started not I've revised the whole lot! (Yet)
That said - the information is really interesting.

In one of the MAD threads one member commented that he is in it for the music but suspected many of us are in it for the melodeons......not me : I'm in it for the social history, the chemistry, world geography, the melodeons....oh yeah and the music.
 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal