Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Liliput reed question  (Read 641 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Liliput reed question
« on: July 09, 2021, 10:38:47 PM »

I have a Liliput where the reeds had mostly fallen out so I took the rest out and cleaned them up ready to go back.
As usual I didn't put valves on the the top two on each row but I noticed the blocks have little wooden wedges in the top three positions.
Should I remove the relevant valves, then fit the plates reversed like the top two, or leave the valves on and then which way do I fit the plates?
The only other box with the same query is in bits too so I can't check.
The original plates seem to have telltale marks where valves had originally been fitted, though as this is a CF to DG conversion, I couldn't guarantee where the original position was.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Liliput reed question
« Reply #1 on: July 10, 2021, 08:49:23 AM »

Reverse the reeds and remove valves from all three positions with wedges.  If In doubt high reeds should be reversed  and generally play better (quicker response and more volume). 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal