Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: pegamoid  (Read 2240 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
pegamoid
« on: July 10, 2021, 10:15:46 AM »

is there still a factory in england that makes pegamoid ??
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: pegamoid
« Reply #1 on: July 10, 2021, 04:02:26 PM »

A one-legged robot?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Mike Hirst

  • Hero Member
  • *****
  • Online Online
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: pegamoid
« Reply #2 on: July 10, 2021, 04:15:44 PM »

Pegamoid is/was a waterproof laquer used in the manufacture of faux leather and previously used as a waterproofing compound for maps.

I'm not sure where it is manufactured, but I do know that is used as a coating for Eley 12 gauge shotgun cartridges.

P.S. I need to check facts here, but I have memory of reading somewhere that it's use was adopted for use in the manufacture of waterproof clothing following a shortage of rubber compounds due to the rapid expansion of cable telegraphy. Also I think it may share some aspects of manufacture with processes used in the making of celluloid. I wonder if a similar compound could be made by dissolving celluloid scraps in an alcohol/acid mixture. I've some early 20thC printed workshop recipe collections. If I can find the books I might be able to find a recipe.
« Last Edit: July 10, 2021, 04:34:17 PM by Mike Hirst »
Logged
Semper idem, sed non eodem modo

Mike Hirst

  • Hero Member
  • *****
  • Online Online
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: pegamoid
« Reply #3 on: July 10, 2021, 05:01:00 PM »

I found this recipe in Henley's Twentieth Century Formulas, Recipes and Processes (1914 edition).

PEGAMOID
  • Camphor, 100 parts
  • mastic, 100 parts
  • bleached shellac, 50 parts
  • gun cotton, 200 parts
  • acetone, 200 parts
  • acetic ether, 100 parts
  • ethylic ether, 50 parts

The inclusion of gun cotton definitely supports my suggested links with celluloid, but this also flags up possible flamable/explosive dangers. I'm no expert here, but I'd suggest care. That said, camphor (moth balls), mastic and shellac are all easily available. A few scraps of celluloid dissolved in acetone with small amounts of those three ingredients might yield results.
Logged
Semper idem, sed non eodem modo

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: pegamoid
« Reply #4 on: July 10, 2021, 05:12:15 PM »

There are some incredibly volatile chemicals there, acetone, ethyl acetate and ethyl ether in particular...
I'm not even sure they would be available to the general public or to anyone outside a registered laboratory.
That's before you get into looking at the requirements for handling as set out in the respective safety data sheets!
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: pegamoid
« Reply #5 on: July 10, 2021, 05:29:58 PM »

"Pegamoid is/was a waterproof laquer used in the manufacture of faux leather and previously used as a waterproofing compound for maps."

Sounds like the sort of stuff I could have made good use of last week. Obviously flexible, and if waterproof I expect it would also be wind proof as well?
I had my sister's pump organ (an American melodeon, I believe) to get working. I couldn't initially figure out how the blinkin' thing actually worked, so I had to consult with melodeon.net's famed organ builder before I could even begin to diagnose the problem. After realising how the 3 sets of bellows interacted, I decided that they had gone porous.
Not having the expertise, nor the materials, to rebuild the bellows; I had thought of using something like the stuff which Barbour's sell to re-proof their waxed jackets, and Pegamoid seems to do the same sort of job. I eventually resorted to coating them up with PVA! (Already in stock, so money to spend!!) Although not perfect, it does now play reasonably successfully, and I'm as pleased as Punch!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Mike Hirst

  • Hero Member
  • *****
  • Online Online
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: pegamoid
« Reply #6 on: July 10, 2021, 05:51:45 PM »

There are some incredibly volatile chemicals there...

I'm sure you are right. I've never been very good on precision and caution.

Some of my less successful shoolboy exploits include setting fire to the school hedge with a homemade hot air balloon and building a rocket powered model car, using a jetex solid fuel engine, which caused a very similar fire in the field behind our house. These pale into insignificance, however, when compared with the near disaster caused by my home made cannon. Firing a one inch ball bearing barely missed removing several fingers and left me with powder burns on my left hand.
Logged
Semper idem, sed non eodem modo

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: pegamoid
« Reply #7 on: July 10, 2021, 06:19:51 PM »

You can get Acetone by the gallon at hardware stores here, the other solvent might be harder to get depending on whether people use them for nefarious things like making drugs. You can't get amil acetate for that reason.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: pegamoid
« Reply #8 on: July 10, 2021, 07:01:53 PM »

History
The earliest faux hides were pegamoid, a nitrocellulose-treated fabric. In Finland, it was used at least since the 1910s, for example, for upholstering furniture. [5]

Finnish accordion manufacturers used pegamoids as Bellows tape in the 1930s -1960s ..   bookbinders also used pegamoid ,,  i have two colors, black and dark blue,   i would just like to know if this is still being made ??
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: pegamoid
« Reply #9 on: July 10, 2021, 07:17:39 PM »

If it is still made, I suspect strongly the mixture has been amended from Mike's original 1914 recipe.
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Mike Hirst

  • Hero Member
  • *****
  • Online Online
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: pegamoid
« Reply #10 on: July 10, 2021, 07:33:28 PM »

The earliest faux hides were pegamoid, a nitrocellulose-treated fabric.

When I was checking details for my earlier posts I came across this document charting the the history of early plastics:

https://discovery.ucl.ac.uk/id/eprint/1348913/2/327732_vol2.pdf

It lists Pegamoid in the context of other trademark names for similar cellulose nitrate plastics. These include:

"Bonesilate, Cellonite, Celluline, Cellulodine, Cellulosine, Coraline, Crolithion, Crytalloid, Fiberloid, Fthrolithoid, Ivaleur, Ivoride, Ivorine, Ivoryide, Lignoid, Lithoxyl, Parkesine, Pasbosene, Pearl-Tone, Pegamoid, Pulveroid, Pyralin, Pyrantin, Pyroxyline, Rubberine, Shell Tone, Shelleur, Viacoloid, Vitroloid, Xylonite, Zylonite and Zyl."

The same document continues:

"Artificial leather was first marketed as Tannette (1890) which was laterknown as Morrocoline (1892). Later tradenames which date from the turn of the century include Fabrikoid, Keretol, Marokene, Meers, Case and Texaderm."

These other names may be useful in locating the fabric you are looking for.

I also found this listing from a Korean firm who offer Pegamoid for use in manufacturing golf equipment:

https://swgong.en.ec21.com/Golf_Bag_Golf_Shoes_Pegamoid--1072385_1077079.html
Logged
Semper idem, sed non eodem modo

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: pegamoid
« Reply #11 on: July 10, 2021, 08:21:42 PM »

thanks Mike ,,  interesting information  (:)
Logged

Mike Hirst

  • Hero Member
  • *****
  • Online Online
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: pegamoid
« Reply #12 on: July 10, 2021, 08:28:21 PM »

Although not perfect, it does now play reasonably successfully

Edward,

sounds like my sort of a repair. I recall a conversation with Chris Algar c.1979 where it was suggested by a good friend of mine, whose name shall remain anonymous to protect the innocent/stupid, that Tyreweld emergency puncture repair might be used as a quick fix for free reed instruments.  :o
Logged
Semper idem, sed non eodem modo

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: pegamoid
« Reply #13 on: July 10, 2021, 08:35:55 PM »

I had thought of puncture repair stuff as well, but that would have entailed going out and buying some, and I was also unsure of how flexible it could be. After all, once an inner tube is inflated, it doesn't bend all that much.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: pegamoid
« Reply #14 on: July 11, 2021, 07:53:17 AM »

You can get Acetone by the gallon at hardware stores here, the other solvent might be harder to get depending on whether people use them for nefarious things like making drugs. You can't get amil acetate for that reason.
Same in the UK. I have a litre bottle of the stuff.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal