Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Cleaning old reeds.  (Read 1105 times)

0 Members and 1 Guest are viewing this topic.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Cleaning old reeds.
« on: July 11, 2021, 11:13:07 AM »

Yes I know we've covered this before, but I still don't feel as if my reeds are clean enough, when I've done with them.
I take the old reeds off, then I scrape the wax off the edges, and where ever else it adheres.
I strip off the old valves, and remove any old glue.
Then I brush them with a wire brush, making sure I don't leave any residue in the reed slot.
Now this is where I feel that I could do more to make them really clean. We have discussed ultrasonic cleaners, and Theo doesn't seem to be a fan, as it leaves them prone to rust, unless treated. I seem to remember Steve D, talking about alcohol for cleaning, but can't find his post.
So what do you folks do to leave your old reeds clean, and fit to be re-used?

Discuss

Sir John

Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Cleaning old reeds.
« Reply #1 on: July 11, 2021, 11:46:55 AM »

My father (clock repairer and maker) cleaned clock parts with an ultrasound cleaner, as does Steve the clock guru on The Repair Shop. I also clean reeds using a cleaning fluid designed for US cleaners. The trick I learned from my Pater and reinforced by watching Steve do same, is to thoroughly rinse the reeds in water afterwards, and then blast them with a hairdryer (or leave them somewhere warm) to dry off. This removes any residue salts from the cleaning fluid. I don’t treat them with anything. Having said all of that, I don’t use the US cleaner much these days as it’s quite time consuming (and therefore adds to the cost). It would be great if the US removed wax and esp glue, but in general it doesn’t. This has to be scraped off first. By the time I have scraped and cleaned using a combination of emery, wire brush, narrow screw driver and abrasive block (the kind used to clean model railway track), the reed is pretty clean and the extra step to US it seems unnecessary.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cleaning old reeds.
« Reply #2 on: July 11, 2021, 12:01:30 PM »

I don’t dislike the ultrasonic bath, it does get the reeds lovely and clean. The main reason I don’t use it much now is just how long it takes,

Steve Dumpleton advocated using acetone, rather than alcohol.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Cleaning old reeds.
« Reply #3 on: July 11, 2021, 12:30:58 PM »

AH yes, Acetone, that's the one. I stand corrected.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Cleaning old reeds.
« Reply #4 on: July 11, 2021, 02:27:08 PM »

Using acetone was one of several tips I had from Mr Freereeder, too. I'll always be grateful for the advice he freely gave me.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Cleaning old reeds.
« Reply #5 on: July 11, 2021, 02:51:02 PM »

I clean as much as possible by scraping mainly with thumbnails the drop them in an old coffee jar of acetone.
After a few hours and the occasional shake I empty the jar half a dozen or so reeds at a time into a kitchen roll filter over an old ice-cream pot and brush them clean with soft brass brush and a fiberglass scraper. I then drop them into another jar of clean acetone.
Only doing a few as a time stops them drying out hard.
Eventually the "dirty" acetone gets chucked and is replaced by the cleaner stuff.
They are close to pristine by now and it doesn't seem to be a waste of time giving the second bath as the acetone does all the hard work.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Cleaning old reeds.
« Reply #6 on: July 11, 2021, 06:54:38 PM »

another vote here for acetone.....clean off as much wax as i can ...throw valves away....acetone for 10 or 15 minutes and then clean off with brass wire brush followed by cotton buds all over and in the reed slots. small reeds get the same treatment with much smaller eyebrow cotton buds. keep cleaning until cotton buds stop collecting dirt. then into fresh acetone for another rinse and then rinse thoroughly in water. I then lay onto paper towel and dry both sides with more paper towel and then dry on top of a radiator. Ive also tried ultrasonic cleaner with sensitive metals fluid as a further final stage but im unsure about it as it removes blueing on reeds and been unable to ascertain if that's a bad thing or not so given that stage up. (though it did release even more fine dirt particles). i recall another post saying a drop of washing up liquid can be used before the clean water stage.  indcidentally if reeds are rusty or coated in dirt i clean all that off before going into the acetone. its a long process but the transformation is very satisfying.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Cleaning old reeds.
« Reply #7 on: July 15, 2021, 12:15:27 PM »

US cleaners are not quick, agreed, but you can switvh them on and walk away...  I used to use them at work and it was always worth doing the bulk of the work by hand to minimize the amount of work the solution had to do.  Often I;d have the parts to be cleaned in a beaker sitting in the machine filled with water to transfer the sound waves to the cleaning solution.  As a "homer" I would clean my bicycle chain.  The forte of the US cleaner is getting unseen compacted dust and grime out of inaccessible places!  I'd have said disaggregated, but me and the spell checker had a bit of an episode...  The chain was left until the solution was hot and came out so completely degreased that it had to be lowered immediately into a molten tin of chain grease to stop it rusting!  The difference in flexibility and total lack of grittiness over any other method of cleaning was evidence of the efficiency of the method.

Worth noting that US is not suitable for softer materials...  Some people tried cleaning lead airgun pellets in one and the cavitation on the surfaces ruined the surfaces.

Rob.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal