Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: rubber reed "wax"  (Read 3020 times)

0 Members and 1 Guest are viewing this topic.

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
rubber reed "wax"
« on: July 28, 2021, 09:04:58 PM »

i usually work on melodeons with reeds held in with wax or on leather. A fellow musician brought me a Hohner Atlantic PA with 5 broken reeds and asked if i could replace them. i learnt a couple of things! firstly the reeds plates were brass and look very well made. anybody come across these in hohners before? maybe same as in a morino? Each one stamped with an o. Are these hohner? the next thing i "learned" was don't work on Hohner Atlantics! the reeds were held in place with some kind of very strong rubber glue that was almost impossible to clean off. Whats that all about? some kind of special hohner concept for accordions that are sent to tropical lands ? Did Hohner run out of wax that day and decide to use some industrial strength glue? anybody else come across it?. Nice reeds but at one point i thought i was going to need to take it to the dentist to get the broken ones out!
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: rubber reed "wax"
« Reply #1 on: July 28, 2021, 09:51:33 PM »

Google image search shows very ordinary-looking Hohner Atlantic interiors.  Makes me wonder if this one was (strangely) rereeded at some point...  Just a thought.
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: rubber reed "wax"
« Reply #2 on: July 28, 2021, 11:26:56 PM »

How weird.  I agree with tirpous, sounds custom.  I had an Atlantic III briefly and it was not like this.  On the Morino they used brass reedplates only on the very highest of the high notes - 4 of them, on the H reedblock.  Dix used an 'O' stamp but I don't know about their use of brass.  I think some harmonium reeds were/are on brass plates.

Can you post a picture?  I'm curious.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: rubber reed "wax"
« Reply #3 on: July 28, 2021, 11:52:02 PM »

A bit off topic but....I recently came across a Viceroy "Professional Model", which had been fitted at some point with rubberoid gaskets which I suspect had been cut from cylinder head gasket material, in the days when motor mechanics regularly made replacement head gaskets during engine rebuilds.
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: rubber reed "wax"
« Reply #4 on: July 29, 2021, 12:42:07 AM »

i spoke with charlie at cgm who said early altantics were fitted with anodised brass reed plates so i guess its all original reeds. i think he mentioned they were also fitted to shand moriinos. i'll try and get some photos off tomorrow. the rubber "wax" looks like wax but isn't....unless its wax mixed with some kind of rubber compound.....its a bit like trying to remove silicon from a bath...but harder! valves all look like hohner punched valves. reeds plates same dimensions as hohner but rivets look higher quality.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: rubber reed "wax"
« Reply #5 on: July 29, 2021, 02:59:09 AM »

I suspect that the ‘wax’ is not original, even if the reeds are. I’ve seen people use all kinds of substances in place of wax, including silicone.

Your description reminds me of wax that I’ve seen in several Savoy cajun accordions - it was clear and looked just like silicone, although it wasn’t. Have you ever come across wax like this in cajun boxes, Chris?
Logged
C#/D player

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: rubber reed "wax"
« Reply #6 on: July 29, 2021, 05:09:09 AM »

Every 4 voice Atlantic I've seen (both in the UK and here in Oz) has had silicon rather than wax, and anodised reedplates.

Their other unusual features include the body construction (all aluminium), and foam rather than felt in the pallet sandwich which breaks down after a few years of use, the residual sand-like material causes reeds and coupler slides to jam, not to mention the high, uneven key action and leaky pallets which quickly develops. No bellows frame pins were used, but a hook mechanism under the treble grill, and internal screws to attach the base end to the bellows frame.

This was Hohner's attempt to produce a lightweight, but full sized instrument, but fraught with issues of materials failure; imho the worst Hohner piano accordion model ever built despite the good intent.

(And just to add a little melodeon content to this post, this model should not be confused with the Hohner Atlanta, a decent enough 2 row, and though it has received some criticism, construction is fairly conventional).

Good luck at the dentists, Chris   >:E
Logged
Tuner/repairer, now retired.

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: rubber reed "wax"
« Reply #7 on: July 29, 2021, 12:15:21 PM »


Your description reminds me of wax that I’ve seen in several Savoy cajun accordions - it was clear and looked just like silicone, although it wasn’t. Have you ever come across wax like this in cajun boxes, Chris?

yes i had an early savoy that had white wax...i still have a little block he gave me many years ago.
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: rubber reed "wax"
« Reply #8 on: July 29, 2021, 12:20:52 PM »

Every 4 voice Atlantic I've seen (both in the UK and here in Oz) has had silicon rather than wax, and anodised reedplates.

Their other unusual features include the body construction (all aluminium), and foam rather than felt in the pallet sandwich which breaks down after a few years of use, the residual sand-like material causes reeds and coupler slides to jam, not to mention the high, uneven key action and leaky pallets which quickly develops. No bellows frame pins were used, but a hook mechanism under the treble grill, and internal screws to attach the base end to the bellows frame.

yup thats it in a nutshell! put me right off fixing any more piano accordions LOL its melodeons for me all the way. I departed from my chosen path and paid the price haha what were hohner thinking. I guess at least if you left it in the back seat of a car on the equator the reeds wouldnt fall out.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: rubber reed "wax"
« Reply #9 on: July 29, 2021, 07:43:11 PM »

Years ago I bought a Preciosa that was a hell of a mess - but I figured that didn't matter as I was getting Theo to convert it to DG so it would get a full reed overhaul and I wanted new bellows anyway.  Unfortunately a previous owner had tried to scrape out most of the crumbling wax and replace it with a bead straight from the nozzle of a tube of bathroom sealant!  Of course it didn't work as the sealant was far too elastic and was not formed into the required gusset shape for optimal performance.  It sounded like a swarm of bees in a jam jar!

It did make me wonder, though, whether silicone could be loaded with a powder to reduce that elasticity and make it effective in place of wax.  Perhaps Hohner were experimenting along these lines with the Atlantic?   They have a name for being very conservative in their designs, yet there have been eras when they try out new ideas.  I've heard that other manufacturers also used the Preciosa design concept to make the smallest possible melodeon, so it may not initially have been a Hohner innovation, but they certainly adopted it and ran with it for a few years.

Yesterday I sat and drank tea whilst a friend stripped out a Pokerwork treble action to replace a broken spring.  We agreed it was better to have a friend  to aim one's complaints at rather than hearing one's swearing echoing back off the walls of an empty room.  One complaint was just how small and fiddly the screws are that hold the action to the fondo.  I suddenly realised that by using such small screws, their positional tolerance upon tightening is also extremely small and the pallets drop straight back in position and seal just as before!  A small design details and maybe happenstance rather than intent, but it just shows that one's first instinct (to use bigger screws) may have cons as well as pros.

I'd applaud the use of new materials and designs, particularly if trialed on a single model.  OK, so it has its downside when it comes to repairs, but the real bad guy in this experiment is the crumbling foam on the pallets.

Rob
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: rubber reed "wax"
« Reply #10 on: July 29, 2021, 09:06:26 PM »

finished it today and breathed a sigh of relief and vowed never again. half an hour later the owner texted to say he'd bought another! nooooooooooooo. nice reeds though. incidentally i replaced the broken reeds with hohner H reeds...slightly shorter but same width and a good match soundwise.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: rubber reed "wax"
« Reply #11 on: July 29, 2021, 09:20:08 PM »

finished it today and breathed a sigh of relief and vowed never again. half an hour later the owner texted to say he'd bought another! nooooooooooooo. nice reeds though. incidentally i replaced the broken reeds with hohner H reeds...slightly shorter but same width and a good match soundwise.

Text him back and tell him that you are delighted for him that he now has a supply of spares for the first one.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: rubber reed "wax"
« Reply #12 on: July 31, 2021, 05:47:24 AM »

Good god that stuff is horrible to work with.
I had one that had let the reeds move about 10% and then anchored in place. I have had to use a hot knife (one of my waxing iron tools cranked up) and cut the reeds out and used it to cut off the glue.

 I did a complete rebuild on one some 10 years ago and swore I would never do another.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Barlow

  • Bad player, good talker apparently
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 111
  • Castagnari Lilly B/C Erica D/G
Re: rubber reed "wax"
« Reply #13 on: August 05, 2021, 11:13:59 PM »

There are some marvellous substances being engineered these days, and not necessarily using silicone.

Is there yet anything that will replace wax?

(I'm interested generally, but specifically just now, I have a B/C where somehow the A and E basses are reversed - so push A, pull E. It looks like it was made that way. It is only a cheap instrument and I am plucking up the courage to learn the art of waxing. But a tube of suitable magic gunky stuff would look very appealing).
Logged
. . .

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: rubber reed "wax"
« Reply #14 on: August 06, 2021, 08:20:57 AM »

Don’t do it! Wax works very well.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: rubber reed "wax"
« Reply #15 on: August 06, 2021, 08:38:46 AM »

There are some marvellous substances being engineered these days, and not necessarily using silicone.

Is there yet anything that will replace wax?

(I'm interested generally, but specifically just now, I have a B/C where somehow the A and E basses are reversed - so push A, pull E. It looks like it was made that way. It is only a cheap instrument and I am plucking up the courage to learn the art of waxing. But a tube of suitable magic gunky stuff would look very appealing).
For a small waxing repair and where you don’t have any reed wax, paraffin wax works ok. You just need a soldering iron. Don’t use glue or anything else like that.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: rubber reed "wax"
« Reply #16 on: August 06, 2021, 01:07:46 PM »

There are some marvellous substances being engineered these days, and not necessarily using silicone.
This is always something that comes to mind when repairing musical instruments, and many other old things such as gramophones. Some materials were (and are) used according to what was available when they first were invented, and today we would use materials that we have on hand if we were to create something new. But wax still seems preferable to silicone as an adhesive for reed plates, thanks to its non-permanent properties. This is the same reason why we still use animal glue to hold a violin together, because it can easily be dissolved when we need to disassemble the instrument for repairs.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: rubber reed "wax"
« Reply #17 on: August 06, 2021, 01:53:01 PM »

There is already a viable alternative to wax for securing reeds and that is to place a thin layer of gasket material between the reed and the reed block and then to secure the reed plate with screws.  This method is more labour intensive  initially but does make it very quick, clean and easy to take a reed out and replace it with just a small screwdriver.
« Last Edit: August 06, 2021, 04:00:34 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: rubber reed "wax"
« Reply #18 on: August 06, 2021, 03:00:47 PM »

very quick, clean and easy to take a reef out and replace it with just a small screwdriver.
What key is the screwdriver tuned to?   8)

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: rubber reed "wax"
« Reply #19 on: August 06, 2021, 03:31:07 PM »

...clean and easy to take a reef out ...

It seems the storm is over in your locale, Theo.

Rob.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal