Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: new keyboard for Hohner Double Ray  (Read 2598 times)

0 Members and 1 Guest are viewing this topic.

burnt nial

  • Member
  • *
  • Offline Offline
  • Posts: 37
new keyboard for Hohner Double Ray
« on: October 20, 2009, 09:52:50 PM »

I have one of these in great shape. It has a plastic keyboard that lets the buttons sink below the surface of the board. Is there anyone selling modified keyboards that fix this? Or does anyone know a way to fix it short of cutting out the back of the board and fitting in a new thicker piece? I don't want to buy a router and a bunch of bits if I can avoid it. Thanks
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: new keyboard for Hohner Double Ray
« Reply #1 on: October 20, 2009, 10:00:49 PM »

The main options are: buy a retrofit keyboard, use a small bar of wood under the arms to limit the travel or place felt under the keys to again limit the button travel.

There is a specific thread regarding keyboard mods if you have a look around.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: new keyboard for Hohner Double Ray
« Reply #2 on: October 20, 2009, 10:36:20 PM »

The main options are: buy a retrofit keyboard, use a small bar of wood under the arms to limit the travel or place felt under the keys to again limit the button travel.

There is a specific thread regarding keyboard mods if you have a look around.

Definitive answer from Theo can be found HERE. I have a Theo modded Erica and can fully support this mod.

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: new keyboard for Hohner Double Ray
« Reply #3 on: October 22, 2009, 04:05:42 PM »

I had one of these models and Michael Usui at Irish Dancemaster put a beautiful Walsh Keyboard on for me.  I'm sure he can advise you where to get these.   Contact him through his webpage.  He installed mine and adjusted the action for me.  I was thrilled with his work.  However if your not in the US shipping cost might be prohibitive if you want him to do the work.  He's great to work with, my Hohner Double Ray was one of the early chinese produced I think from around 1991, the tuning and sound was pretty bad and after he tuned it up and replaced the keyboard I'd say it sounds as good as my friends Saltarelle Bouebe at least that is what I'd compare it to.  I'm sure Theo can do the same for you if your in the UK. 

http://www.irishdancemaster.com/accordion.html  
« Last Edit: October 22, 2009, 04:21:24 PM by ajay38 »
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: new keyboard for Hohner Double Ray
« Reply #4 on: October 23, 2009, 08:44:21 PM »

Make your own

If you don't have a plan... I'll send you one.

Dancemaster has a prototype of my keyboard that was designed to be accessed from front or back and for Erica or Pokerwork and would look appropriate on either and of any age or period
Replete with thumb groove...

I did not give Dancemaster permission to make these or have them made and have been waiting fmonths or the return of my prototype.

Mine was made after looking at amateurish attempts by others... a few by some proclaimed "expert" , "exacting" German woodwoker..
inelegant comes to mind

As mine was a prototype it needed a small bit of fiddling but essentially good to go...

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal