Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Want to build a melodeon next week?  (Read 4785 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Want to build a melodeon next week?
« Reply #20 on: August 31, 2021, 09:51:38 AM »

Mind, that is a big thing!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Jeremy Burnett

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Want to build a melodeon next week?
« Reply #21 on: August 31, 2021, 10:23:49 AM »

I think the distance between the grille and the buttons in this (Emanuel's) case could be due to standardisation of parts.
I have two of his melodeons. One made some years ago on the course in France which is one of his standard course boxes. The other is a smaller 2 row 8 bass made by Emmanuel himself. Although the boxes are of different sizes the distance between the grille and the inner row of buttons (ignoring the accidentals) is the same.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Want to build a melodeon next week?
« Reply #22 on: August 31, 2021, 11:07:28 AM »

"I think the distance between the grille and the buttons in this (Emanuel's) case could be due to standardisation of parts."

I expect that's correct, and sensible! I image that the buttons stop when they become level with the fingerboard. Can anyone tell me the amount of button travel and the amount of lift there is at the pallets?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Want to build a melodeon next week?
« Reply #23 on: August 31, 2021, 02:01:19 PM »

Both boxes in this thread have a similar feature which has puzzled me for quite some time. I've only noticed it on newer boxes and it's the, seemingly increased, distance from the treble buttons to the grille!
It's obvious that many players prefer buttons with a short travel from resting to being open, for speed I suppose. But surely with this distance being greater, then the button leg of the lever must be longer, in relation to the pallet leg, than on the older instruments, giving a greater distance for the button to travel to fully open the pallet?
Is this the case?
Both lovely boxes, by the way.
Absolutely correct.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Want to build a melodeon next week?
« Reply #24 on: August 31, 2021, 02:41:38 PM »

"I think the distance between the grille and the buttons in this (Emanuel's) case could be due to standardisation of parts."

I expect that's correct, and sensible! I image that the buttons stop when they become level with the fingerboard. Can anyone tell me the amount of button travel and the amount of lift there is at the pallets?

I suspect the only person who can really answer your question is the designer,  Emmanuel
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Want to build a melodeon next week?
« Reply #25 on: August 31, 2021, 03:13:02 PM »

Yes, but as it's only me wanting to clarify things in my head; I wouldn't bother the man himself. Thanks for your replies.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Want to build a melodeon next week?
« Reply #26 on: September 01, 2021, 10:12:31 AM »

You “bothered” us.  (Which is what Melnet is for).

Emanuel has superb english and is a very friendly chappie.

He’s also “one of us”. A melodeonista.Just rather better at doing it 😉
Logged
  _       _    _      _ 

heartshaped1

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 104
Re: Want to build a melodeon next week?
« Reply #27 on: September 02, 2021, 05:41:35 PM »

Hi Winston, sorry, only just caught up with this thread - I was lucky enough to build one of these amazing instruments this year on the first of Emmanuel's two weeks at Halsway, so I can partially answer your question.

The button travel is 4mm - this is however up to the individual to sort out and there could be a couple of mm either way so I would imagine you could have higher or lower as you wish.

I haven't measured the amount of lift at the pallets but would say 'not much but definitely enough' which is clearly not too scientific, but certainly my Pokerwork is higher (and with the joy of added disappearing buttons, of course). 

What I would say is that this box is significantly quicker to respond than my other boxes (Hohner, Castagnari).

Vicky.
Logged
G/C/Acc VanDerAa, D/G/Accs Oakwood, D/G/Acc Hohner Lucia, D/G Pariselle, G/C Castagnari Lilium, C/F Hohner Club I, D/G Hohner Pokerwork

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Want to build a melodeon next week?
« Reply #28 on: September 02, 2021, 06:15:45 PM »

Thanks Vicky. I hope you're OK, long time no see!

4mm, That's not very much at all. And by the looks of the instrument, the button leg of the lever is the longest so one would imagine that the pallets lift even less.

I'd better take Chris's kidding and try to contact the Man himself to satisfy my curiosity. Thanks to all those who've responded, anyway.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: Want to build a melodeon next week?
« Reply #29 on: September 02, 2021, 06:58:07 PM »

It's hard to tell with much precision just from photos of the boxes, and a lot of the lever geometry will depend on where the soundboard sits, which we can't see (my guess is the soundboard is rather nearer the grille side of the treble body than the bellows side?), but to my eye it doesn't look as though the levers on those (beautiful!) Pariselle boxes would need to be any longer in the button arm than they are in the pallet arm, if that makes any sense. I would think that it's probably only once the button end of the lever gets longer than the pallet end you might be getting into annoying territory, though that will partly be down to personal taste of course.

When I restricted the button travel on my Erica I measured roughly how far the pallets need to open for the reed to sound reliably and at full volume, and was surprised to find it was only something like 4mm at the top end of the pallet. To be safe I made sure they open to 5mm with the travel restriction in place, which gives me a button travel of about 3mm on the outside row and perhaps nearer 4mm on the inside. In fact, the inside row levers on the Erica are almost "square" - a slightly haphazard measurement from the centre of the button to the axle and from the axle to the centre of the pallet gave me something like 40mm for both measurements.

So in my experience the pallet lift required for the reed to sound well is surprisingly small, and actually very close to the range of button travel I find comfortable. Of course preferred amount of button travel is a personal choice, and the pallet lift required may vary based on the pallet facing used and the size and placement of the soundholes. But in my experience at least, a square lever with equal distance from the axle to the button and to the pallet would be pretty close to ideal - so perhaps the boxes are actually designed to achieve this?

Do report back what you find out from the man himself!
Logged
GC Erica

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Want to build a melodeon next week?
« Reply #30 on: September 02, 2021, 07:05:52 PM »

Thanks for your input here as well, Kon.
Although someone mentioned that he's a member on here, I cannot find him under either E or P.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kon

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 165
Re: Want to build a melodeon next week?
« Reply #31 on: September 03, 2021, 10:41:44 AM »

Another thought is that the length of the button arm might have quite a strong impact on the "feel" of the keyboard - if the spring tension is equal, a lever with a longer arm on the button side should give you some mechanical advantage over one with a shorter arm, resulting in less resistance when you press the button. I wouldn't be surprised if that makes the keyboard feel more responsive, even if it results in slightly longer button travel.
Logged
GC Erica

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Want to build a melodeon next week?
« Reply #32 on: September 03, 2021, 08:28:57 PM »

Theo sold me a lovely Pariselle a few years ago but I passed it on because it was too classy for me and deserved a better player.

Instead of which it got me 🙂.

Your box looks lovely, John! Hope it brings you much happiness.
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Want to build a melodeon next week?
« Reply #33 on: September 03, 2021, 10:34:16 PM »

I may be misunderstanding, but it is possible to balance button and palate movement to be the same between row. Here’s an interview I did in Brabant, showing how.

     https://youtu.be/4uZmT3RdISI

I’ve not ever taken a Pariselle apart. They are lovely to play 👍
Logged
  _       _    _      _ 

doctordoom

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: Want to build a melodeon next week?
« Reply #34 on: September 04, 2021, 10:34:34 PM »

Another thought is that the length of the button arm might have quite a strong impact on the "feel" of the keyboard - if the spring tension is equal, a lever with a longer arm on the button side should give you some mechanical advantage over one with a shorter arm, resulting in less resistance when you press the button. I wouldn't be surprised if that makes the keyboard feel more responsive, even if it results in slightly longer button travel.
So that the resistance on pressing the buttons which are on three different lengths of lever arm  is equal, Emmanuel provides three different spring tensions,  strong weak and medium,  i.e strong on the long arms , weak on the short arms, great fun fitting them (not!)
They are spiteful little b.......ds with a delight in springing back into your fingers with their little pointed ends if you loose your grip while fitting them on the lever arms, button height is optional,  the arms are aluminium and quite malleable,  adjusting height is a combination of bending the arm and the amount the button is screwed into the plastic tube attached to the end of the arm, centering the buttons and getting them even and in line is quite time consuming,  mine still need a bit of a tweak! 
Cheers John.
« Last Edit: September 04, 2021, 10:40:16 PM by doctordoom »
Logged
Beginner, (absolute deleted after 2 years!)
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal