Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Why are reeds waxed in  (Read 4109 times)

0 Members and 1 Guest are viewing this topic.

Hugh Taylor

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 437
    • Band web site: http://www.tumblingtom.co.uk
Why are reeds waxed in
« on: August 14, 2021, 02:31:27 PM »

Probably a stupid question, but why are our reeds waxed in, whereas concertina reeds are screwed in?
Logged
Castagnari Mory D/G, Castagnari Tommy D/G, Saltarelle C/F, Hohner Erika A/D
Tumbling Tom Band - http://www.tumblingtom.co.uk/

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Why are reeds waxed in
« Reply #1 on: August 14, 2021, 03:26:32 PM »

Not all melodeon reeds are waxed in. Quite a few are mounted on a leather gasket, then held in place with screws. At this moment in time there is a course being run at Halsway Manor by Emmanuel Pariselle, and I believe this is his preferred method of mounting reeds.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Why are reeds waxed in
« Reply #2 on: August 14, 2021, 03:59:47 PM »

Not all melodeon reeds are waxed in. Quite a few are mounted on a leather gasket, then held in place with screws. At this moment in time there is a course being run at Halsway Manor by Emmanuel Pariselle, and I believe this is his preferred method of mounting reeds.

Sir John
<pedantry> Emmanuel uses Olovisc gasket a thin type of cork gasket not leather. </pedantry>

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Why are reeds waxed in
« Reply #3 on: August 14, 2021, 04:20:43 PM »

I knew that Lester, but it's a leather substitute, really.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Why are reeds waxed in
« Reply #4 on: August 14, 2021, 05:12:46 PM »

Quote
Probably a stupid question, but why are our reeds waxed in, whereas concertina reeds are screwed in?

Not 100% sure, but:

- Usually melodeon reeds are riveted to the reedplate, which is (usually but not always) waxed to the reedblocks.

- Usually, concertina reeds are screwed to the reedplate which is wedged in a kind of dovetail slot in the reedpan.

So really it's waxing vs dovetail we should be comparing.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Why are reeds waxed in
« Reply #5 on: August 14, 2021, 05:22:03 PM »

Not all melodeon reeds are waxed in. Quite a few are mounted on a leather gasket, then held in place with screws. At this moment in time there is a course being run at Halsway Manor by Emmanuel Pariselle, and I believe this is his preferred method of mounting reeds.

Sir John
<pedantry> Emmanuel uses Olovisc gasket a thin type of cork gasket not leather. </pedantry>

More pedantry.  It’s not cork either. It’s a fibrous synthetic material.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Why are reeds waxed in
« Reply #6 on: August 14, 2021, 05:29:13 PM »

I think concertinas take the prize for largest variety of reed mounting techniques.
Traditional english made concertina reeds are mounted in tapered dovetail slots, German ones used plates like harmonicas and could be waxed or held with L nails or screws. Some modern concertinas use individual plates with screws, the rest seem to have reeds waxed in like piano accordions.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Why are reeds waxed in
« Reply #7 on: August 14, 2021, 10:41:03 PM »

Having dealt with both screwed on leather and waxed in reeds, The screwed on arrangement gets my vote.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Why are reeds waxed in
« Reply #8 on: August 14, 2021, 10:58:53 PM »

Coming back to the original question (why use wax), I guess it's a reasonably simple/straightforward/economical way of at once fastening and leakproofing the reedplates to the reedblock.  Plus there is a historical manufacturing background.
Logged

Inventor

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 117
Re: Why are reeds waxed in
« Reply #9 on: August 15, 2021, 03:53:53 PM »

Re. Concertina Reeds:-
Traditional Concertina Reeds are neither waxed or screwed in. The individual reeds are wedged into the reed pan, which has double dovetail slots cut into it. Only the so called Hybrid concertinas which use Accordion or Melodeon reedplates are screwed in with a leather gasket, or waxed in, in the same way as on Melodeons.
Inventor. 



 
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Why are reeds waxed in
« Reply #10 on: August 15, 2021, 04:12:04 PM »

Quote
Traditional Concertina Reeds are neither waxed or screwed in.

Well, yes and no.  The vibrating reeds are -screwed- to the reedplate.  This is what I was trying to clarify in my earlier reply (#4)
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Why are reeds waxed in
« Reply #11 on: August 15, 2021, 07:36:56 PM »

Waxing reed-plates in is a much quicker method that screwing onto gaskets and is therefore used in mass production.
Fitting the gaskets is time consuming, I can wax a whole instrument in less than an hour which is about the same time as it takes to fit gaskets to one side of a reed-block. Then all the screw holes must be drilled, etc.
However, repairs are much easier using the non-wax method.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Why are reeds waxed in
« Reply #12 on: August 15, 2021, 07:50:29 PM »

Waxing reed-plates in is a much quicker method that screwing onto gaskets and is therefore used in mass production.
Fitting the gaskets is time consuming, I can wax a whole instrument in less than an hour which is about the same time as it takes to fit gaskets to one side of a reed-block. Then all the screw holes must be drilled, etc.
However, repairs are much easier using the non-wax method.
Additionally the wood used for the reed blocks needs to be of higher density (is that the right term?) to take the screws without the screws working loose/breaking out/splitting the thin chamber walls.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Why are reeds waxed in
« Reply #13 on: August 15, 2021, 08:27:38 PM »

I was going to opine similar view to Rees and Lester, but I don’t actually know if the early accordion manufacturers chose sticky wax because it was faster than other methods. It does look like the case, but perhaps Rees has actually spoken to Italian makers who confirm this? Because many accordions do actually have tacks as well as wax. And someone must have cooked up the beeswax and rosin mixture..but did they just say to themselves 'hey, waxing is quicker and it needs to be sticky...ooh I have some rosin here...etc'. There maybe someone in Castelfidardo who can tell us...maybe in the museum..or that elderly chappie across the square with the giant accordion and the tuning bench in his shop...

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Why are reeds waxed in
« Reply #14 on: August 15, 2021, 08:28:08 PM »

I have 'converted' several previously waxed Boxes to screw & 'gasket' , which is what the Olovisc, it seems to me - as was previously the leather - is.  Latterly I have had success with Neoprene EPDM Blend sheet, which is very similar to Olovisc as I find it to be a bit on the steep side.  I did think after my last use of Olovisc that my system of sticking a sheet on the 'block' then cutting out and throwing away all the spaces where reeds were ( ie 75% of it ? ) was wasteful and I might have been better employed creating strips but that seemed a fiddly way to do it, either way, the EPDM does as good a job and it is intended for the purpose of creating a gasket seal.  It is margunally thicker than the Olovisc, but not much and is none the worse for it.

Bearing in mind Lester's comments borne of experience, the Box I copied from was the Fidel Socin, 1930's top quality Italian 3 voice.  Each reed plate is very lightly notched at the mid point on the end opposite the rivet.  The mating surface of the block has a very thin 'fillet' of wood along it's leading edge, angled slightly towards the base plate, with a thin strip of leather running along it.  When the reed plate is placed on the aperture, it is pushed with some pressure against that leather/wood strip and the fixing screw is only screwed into the meatier part of the block opposite the mating plate.  The pressure of the screw  shank against the plate at one end and the wood fillet and leather strip at the other, ensure that it is effectively fixed top and bottom and 'clamped' down tightly at the sides.

I use "Servo Screws",  they have a very fine shank and over sized head, as if a washer was being applied to hold the reed.  They are inserted with an Allen style driver so no risk of screwdriver slip.

My rig for notching reeds comprises a 4" angle grinder stand, angle grinder with the thinnest metal blade I could get and a Heath Robinson wooden (oak) block with a sliding 'gap' jig and should not be contemplated by anyone with any regard for their own personal safety.....but it works a treat as long as supported by 'prayer' and deep concentration.

By this means, there is no need for any fasteners in the thin side walls of the 'blocks', as per the original 1930's build. 
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Why are reeds waxed in
« Reply #15 on: August 15, 2021, 09:24:30 PM »

I spoke to aa 95 year old Italian reed tuner who told me that reed-wax comprises 50% wox (sic), 50% resin and 5% olive oil - that's 105% so it must be good!  ;D
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Why are reeds waxed in
« Reply #16 on: August 16, 2021, 10:53:55 AM »

That’s a lot of rosin. No wonder it’s v sticky.

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Why are reeds waxed in
« Reply #17 on: August 16, 2021, 11:23:32 AM »

I discovered for myself last week the reason why reeds are waxed it. If they aren't, they fall out 😁.
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Why are reeds waxed in
« Reply #18 on: August 16, 2021, 01:26:24 PM »

I discovered for myself last week the reason why reeds are waxed it. If they aren't, they fall out 😁.

Way to go, Chris......for the refit.....
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Why are reeds waxed in
« Reply #19 on: August 16, 2021, 01:35:22 PM »

I discovered for myself last week the reason why reeds are waxed it. If they aren't, they fall out 😁.

Way to go, Chris......for the refit.....
;D ;D ;D
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal