Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: ease of repairability...  (Read 1245 times)

0 Members and 1 Guest are viewing this topic.

Andy Klunder

  • Member
  • *
  • Offline Offline
  • Posts: 4
ease of repairability...
« on: September 06, 2021, 07:15:34 PM »

I posted about a stuck key on a Saltarelle Epsilon recently - now gone back to supplier for repair. It seems to be a broken spring…
It seems the whole keyboard will have to be dismantled for the sake of one button, which is quite. a job, and beyond my skills.
It made me wonder, do melodeons which have closed keyboards, and screw-on panels on the back side of the keyboard, have access to to the springs, such that you don't have to dismantle the whole keyboard assembly for one faulty spring? Ie can you just take the back panel off to get to the springs? Any ideas anyone?
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: ease of repairability...
« Reply #1 on: September 06, 2021, 07:32:31 PM »

The old boxes with wooden actions don't have the coil of the spring round the axle rod- though there is very often a fine saw cut groove in the centre of the lands of the key slots cut into the keyboard which the lower leg of the keyspring lies in. broken springs can be removed with horologists pliers or tweezers and replacements inserted using these or specialist tools (I use a piece of flattened brass tube of about 3/16 inch diameter) with slots cut in the end that the "feet" of the spring sit in while I insert it into the key board.)
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: ease of repairability...
« Reply #2 on: September 06, 2021, 07:48:45 PM »

The old boxes with wooden actions don't have the coil of the spring round the axle rod
None of the modern boxes with wooden actions I have worked on have coiled springs around the axle either.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: ease of repairability...
« Reply #3 on: September 06, 2021, 07:49:13 PM »

If it’s a new box, removing the axle/spindle is not that big a deal, if you’ve done it a few times and know what to expect. Getting it all back together, ditto. There's a bit of a knack, so it’s probably like a lot of jobs...you need to have done it a few times and learned how it’s done. In fact I've got a specialised tool, which is a small Chuck attached to a hollow handle (to allow the spindle to pass)...and this does help.
On the other hand, getting the spindle out of an 80yr old PA, for instance, can be a pain..but there are various techniques.
The best keyboard construction for maintenance doesn’t have a spindle... but a 'keyway'..which is a long sharp pivoting edge. The key rocks on this and is held on by a coil spring accessed at the elbow of the key lever (or if it’s a Hohner Atlantic by a locking screw which releases the key when turned through 90 degrees). This system means that keys come off individually and is a great help for maintenance. Actually I reckon it’d be quicker for getting the keys on too, so not sure why it’s not used more as a way to make keyboards.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: ease of repairability...
« Reply #4 on: September 06, 2021, 07:52:40 PM »


It made me wonder, do melodeons which have closed keyboards, and screw-on panels on the back side of the keyboard, have access to to the springs, such that you don't have to dismantle the whole keyboard assembly for one faulty spring? Ie can you just take the back panel off to get to the springs? Any ideas anyone?
All the boxes I have worked on with wooden actions such as your Epsilon have needed the axle to be pulled to release the levers to access the springs.
Boxes with closed keyboards, screw-on panels and metal actions can normally be fixed by replacing the spring though the removable panel.

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: ease of repairability...
« Reply #5 on: September 06, 2021, 10:06:13 PM »

Unless there east German
Logged
Mark Taylor
Folkloristmark

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: ease of repairability...
« Reply #6 on: September 06, 2021, 10:22:14 PM »

I posted about a stuck key on a Saltarelle Epsilon recently - now gone back to supplier for repair. It seems to be a broken spring…
It seems the whole keyboard will have to be dismantled for the sake of one button, which is quite. a job, and beyond my skills.
It made me wonder, do melodeons which have closed keyboards, and screw-on panels on the back side of the keyboard, have access to to the springs, such that you don't have to dismantle the whole keyboard assembly for one faulty spring? Ie can you just take the back panel off to get to the springs? Any ideas anyone?

Yes, though springs on Italian made boxes rarely give trouble.
I've repaired many boxes with sticking buttons and wooden action that requires the axle rod to be pulled.  The problem is almost always friction, usually from wear or slight corrosion on the axle rod.

Hohner springs are more prone to break and there you have to remove the whole action before you can withdraw the axle rod!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: ease of repairability...
« Reply #7 on: September 06, 2021, 11:33:29 PM »

The old boxes with wooden actions don't have the coil of the spring round the axle rod- though there is very often a fine saw cut groove in the centre of the lands of the key slots cut into the keyboard which the lower leg of the keyspring lies in. broken springs can be removed with horologists pliers or tweezers and replacements inserted using these or specialist tools (I use a piece of flattened brass tube of about 3/16 inch diameter) with slots cut in the end that the "feet" of the spring sit in while I insert it into the key board.)

As in this example (a Kalbe "Little Lord Fauntleroy") - taking the keyboard off whole gives access to the springs.

Edit to add: Just like Iain D's Oakwood. In fact a screw from the inside of the box into each end of the keyboard seems pretty universal, in the case of instruments with metal action (screwed to the front of the fondo) the keyboard is just a shell. In wooden action instruments the action is built into the keyboard itself.   I was initially very reluctant to take a keyboard off until Theo told me to do so (to get a clear photo of a fondo)- having done so once I realised that it is the only way to deal with action problems on antique instruments.
« Last Edit: September 11, 2021, 12:08:38 PM by Peadar »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: ease of repairability...
« Reply #8 on: September 11, 2021, 11:50:22 AM »

My Oakwood has the keyboard held on with two big screws from the inside; remove these and the keyboard and all the levers come off in one piece, then replacing a spring is trivial.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal