Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Converting a C/C# to C#D  (Read 1802 times)

0 Members and 1 Guest are viewing this topic.

Seamus Kerans

  • Member
  • *
  • Offline Offline
  • Posts: 24
Converting a C/C# to C#D
« on: September 10, 2021, 12:36:22 PM »

I bought a C/C# by mistake thinking i was getting a C#/D don't ask me how, I didn't spend enough time examining it and the tuning app on my phone read some of the notes wrong, its reading them perfect now, I think the app might have had some sort of transpose setting on it. 
Anyway long story short it's a cheap and cheerful Martini, the bellows is tight and the action on all of the buttons is perfect there are no notes sounding without a button being pressed it was a learners instrument where the learner wasn't overly enthusiastic so very little wear and tear. I want to learn to play C#/D (having played B/C all my life I am finding playing in the C#D style to be more instinctive for me) and then move on to a better quality instrument.
So what is the best way to convert to C#D?  Do I move all the C# reeds over to the outside row and buy a new set of reeds for the inside row and and the missing ones for the outside row? or do I just retune all of the reeds up a semitone? or do I by a full set of new reeds? I haven't even thought about the bass side.
I am thinking that a Martini even with a new set of high quality reeds and a full refurb wont have a great resale value and I'll end up making a loss, whereas if I retune the existing reeds to C#D even if I have to pay a professional to do it, and the refurb I should get my money back. Not looking for a profit just to have enough to put towards a better quality instrument in the future. But can the Martini reeds take such a retuning?
I also have a set of good quality B/C reeds from an accordion that is 'beyond economic repair' that I could stick into it and then sell it, but it is a three voice and I was hoping to find a better quality box to donate those reeds to.

I could just refurbish it as is and put the proceeds into another accordion but I don't think there is a market for C/C# especially in the cheaper quality instrument. If this has been discussed previously please feel free to put up the link.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a C/C# to C#D
« Reply #1 on: September 10, 2021, 12:43:05 PM »

If you have some experience in tuning reeds, and you have some good files it’s usually possible to tune all the reeds up by a semitone. I’ve done that a few times with CC# Hohners. You have to be especially careful with the small high pitched reeds.
If you bought new reeds, or paid someone to do the work I doubt very much if you would increase the resale value.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Converting a C/C# to C#D
« Reply #2 on: September 10, 2021, 01:42:02 PM »

I had a Martini and I think it was an export name used by Weltmeister.  But the reeds were of cheap quality, as you mention.  I ended up changing them out.  If yours are as unresponsive as mine were, I wouldn't really want to pair them with a nice D row.  I second your feeling that the matched set of BC reeds should go into a new instrument as a set, but on the other hand, you are somewhat less likely to stumble on a cheap and suitable 3-voice host box.  You could use two of the BC for now and shift them to another box later should the opportunity arise...
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a C/C# to C#D
« Reply #3 on: September 10, 2021, 02:24:38 PM »

I had a Martini and I think it was an export name used by Weltmeister. 

Mostly that brand name is used on this model which is Chinese

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Converting a C/C# to C#D
« Reply #4 on: September 10, 2021, 02:40:06 PM »

If you are playing on your own just pretend the C# row is actually in D. If you have a guitar/bazouki/whatever accompaniment get them to break out a capo. Not ideal but you gets to play in the C#D style.

Seamus Kerans

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Converting a C/C# to C#D
« Reply #5 on: September 10, 2021, 03:05:40 PM »

If you have some experience in tuning reeds, and you have some good files it’s usually possible to tune all the reeds up by a semitone. I’ve done that a few times with CC# Hohners. You have to be especially careful with the small high pitched reeds.
If you bought new reeds, or paid someone to do the work I doubt very much if you would increase the resale value.
I don't have any tuning experience  but it is a skill I want to acquire and I wouldn't mind investing  in the equipment,  the accordion only cost  me €80 so I suppose I could take  the chance and give it a go, worst case I bugger it up and have to buy a new set of reeds. Where would I get the files? Thanks for all the replies
Logged

Seamus Kerans

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Converting a C/C# to C#D
« Reply #6 on: September 10, 2021, 03:16:42 PM »

I had a Martini and I think it was an export name used by Weltmeister. 

Mostly that brand name is used on this model which is Chinese


As far as I know this one was made in the GDR I don't have it with me but i think it had 'Made in Germany' on the back and was finished in the pokerwork style,
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Converting a C/C# to C#D
« Reply #7 on: September 10, 2021, 03:25:19 PM »

If you are playing on your own just pretend the C# row is actually in D. If you have a guitar/bazouki/whatever accompaniment get them to break out a capo. Not ideal but you gets to play in the C#D style.
Doesn't help the OP but that's my kind of fix......I think of it as a Db box.
Logged

Seamus Kerans

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Converting a C/C# to C#D
« Reply #8 on: September 10, 2021, 03:34:20 PM »

If you are playing on your own just pretend the C# row is actually in D. If you have a guitar/bazouki/whatever accompaniment get them to break out a capo. Not ideal but you gets to play in the C#D style.
Doesn't help the OP but that's my kind of fix......I think of it as a Db box.

Thanks for that lads i'm already doing that on a B/C box which is how I found out it suits my playing style better, but I find if I do it too much, my ears get confused which is probably why I ended up buying an accordion in the wrong key ;D apart from overly relying on technology.
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Converting a C/C# to C#D
« Reply #9 on: September 10, 2021, 03:56:22 PM »

As far as I know this one was made in the GDR I don't have it with me but i think it had 'Made in Germany' on the back and was finished in the pokerwork style,

Ah yep, that sounds like mine, which definitely had GDR appearance and quality.

Thanks for the info though, Theo -- I didn't know that brand name got 'recycled.'  Probably the only country that would not stoop to producing a "Martini" is Italy... : )
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a C/C# to C#D
« Reply #10 on: September 10, 2021, 03:59:37 PM »

I had a Martini and I think it was an export name used by Weltmeister. 

Mostly that brand name is used on this model which is Chinese


As far as I know this one was made in the GDR I don't have it with me but i think it had 'Made in Germany' on the back and was finished in the pokerwork style,

That's interesting.  When I've seen this grill design before everything about the box looks Chinese.  I'd be interested to see the GDR badge.

If it is "pokerwork" style then it probably is German from the GDR era.  Reed quality in those boxes is very variable.

If it only cost €80 then it's a perfect opportunity to learn some tuning skills.

I'm using three types of file at present

1 Grobet triangular saw file - slim

2 Vallorbe triangular needle file cut 2

3 600 grit diamond file but this will be far to slow for tuning up a a semitone.

If you only get one file go for the Vallorbe needle file. 
« Last Edit: September 10, 2021, 04:17:19 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a C/C# to C#D
« Reply #11 on: September 10, 2021, 04:05:59 PM »

Without a picture of the OP's box, we cannot be sure; but I don't think it's the same as the one you posted, Theo. My immediate thought was that it was one of those which you christened a "melodeon shaped object" some time ago.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting a C/C# to C#D
« Reply #12 on: September 10, 2021, 04:17:47 PM »

Without a picture of the OP's box, we cannot be sure; but I don't think it's the same as the one you posted, Theo. My immediate thought was that it was one of those which you christened a "melodeon shaped object" some time ago.

Yes I think that's right.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Converting a C/C# to C#D
« Reply #13 on: September 10, 2021, 04:42:15 PM »

Here's a closeup of mine.  It had a "GDR" label on the back.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a C/C# to C#D
« Reply #14 on: September 10, 2021, 05:38:48 PM »

As Eric Idle would say, "Say no more, Sport; say no more!"
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Seamus Kerans

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Converting a C/C# to C#D
« Reply #15 on: September 10, 2021, 07:02:14 PM »

Here's a closeup of mine.  It had a "GDR" label on the back.
I haven't figured out how to upload a photo but mine is very similar  to this.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Converting a C/C# to C#D
« Reply #16 on: September 10, 2021, 09:41:44 PM »

I don't have any tuning experience  but it is a skill I want to acquire and I wouldn't mind investing  in the equipment,  the accordion only cost  me €80 so I suppose I could take  the chance and give it a go, worst case I bugger it up and have to buy a new set of reeds. Where would I get the files? Thanks for all the replies
[/quote]

I'd advise against you trying to do this yourself. It doesn't "only" involve pre- and fine-tuning an entire set of reeds, but also complete re-waxing and re-valving. Leave this to an expert.
Logged

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Converting a C/C# to C#D
« Reply #17 on: September 11, 2021, 01:35:22 AM »

If you have some experience in tuning reeds, and you have some good files it’s usually possible to tune all the reeds up by a semitone. I’ve done that a few times with CC# Hohners. You have to be especially careful with the small high pitched reeds.
If you bought new reeds, or paid someone to do the work I doubt very much if you would increase the resale value.
I don't have any tuning experience  but it is a skill I want to acquire and I wouldn't mind investing  in the equipment,  the accordion only cost  me €80 so I suppose I could take  the chance and give it a go, worst case I bugger it up and have to buy a new set of reeds. Where would I get the files? Thanks for all the replies

That’s the spirit! Vallorbe files would be something I’d steer for, Carini carries them last I checked. Most people on this forum would be only happy to help and guide with any questions you’d have along the way.
Logged
Too many accordions, help!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Converting a C/C# to C#D
« Reply #18 on: September 11, 2021, 11:10:03 AM »

When I was working, I bought the best tools available. They were much more expensive than the run-of-the-mill DIY stuff, but I knew that I could rely on them to do the job for which they were designed, time and time again.

With my current melodeon modifying distraction, I use files for tuning the reeds; but it wouldn't enter my head to splash out getting onto a tenner a piece for needle files! The ones I've been using successfully, for the past year or so, came from Aldi; for about a fiver for the full set. Perfectly adequate for the hobbyist, in my opinion.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Converting a C/C# to C#D
« Reply #19 on: September 11, 2021, 11:33:37 AM »

I'd advise against you trying to do this yourself. It doesn't "only" involve pre- and fine-tuning an entire set of reeds, but also complete re-waxing and re-valving. Leave this to an expert.
That's all very well, but you have to start learning somewhere, and I'd far rather someone got started and made their first mistakes on an £80 box they're not particularly attached to and only needs pretty basic work than that they made a dog's breakfast of a more expensive and/or desirable instrument. 
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal