Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hello from South Africa  (Read 1999 times)

0 Members and 1 Guest are viewing this topic.

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Hello from South Africa
« on: September 11, 2021, 04:50:37 PM »

Hello all,
I am a new member from South Africa and learning to play melodeon.
I have been playing harmonica since childhood and last year, during the covid19 lock-down, I decided to explore other instruments.
First got a ukulele, then a banjo, followed by a mandolin. Thanks to YouTube I am playing all of them now.
Then I got a couple of cheap Anglo concertinas- a no name Chinese and an old Scholer.
Then I started looking around and found a beautiful Hohner 21 button- 4 bass pressed wood melodeon in A/D. And then I found two more- a Hohner 1040 Pokerwork in A and a Hohner HA114 Pokerwork in D. The 114 is without one spoon, so i cannot play it yet.
The 1040 was a huge disappointment- about 14 treble reed tongues and 5 bass reed tongues are broken off. So, what do I do with it? Is it worth trying to get a set of reeds for it, or is it just a wall hanger?
Thanks for any advice.
Logged

Little Eggy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 843
Re: Hello from South Africa
« Reply #1 on: September 11, 2021, 05:51:15 PM »

Welcome to the group.  It’s brilliant.  There are some very experienced, clever, friendly and helpful people here and someone will come along soon with good advice.  Did you get your boxes from a music shop?  eBay?  Were they properly described?
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Hello from South Africa
« Reply #2 on: September 11, 2021, 08:13:39 PM »

Buy or make a new spoon can be done out of a spoon. Or if you glue an appropriate sized coin over it then play it without that bass until fixed. Not too strong a glue for retro removal.swap the spoons around if its the air spoon. There are air hole mods some do that would free up a spoon .
If the 100 has that many broken reeds you might be better to source replacements easier said than done.
Logged
Mark Taylor
Folkloristmark

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello from South Africa
« Reply #3 on: September 11, 2021, 08:46:37 PM »

You can buy a new spoon bass from Hohner.  There might be an importer in SA, if not try the Hohner C Shop.
http://www.hohner-cshop.de/en/Accordion/Diatonic/1-row/Vienna-Model-114-C/Spoon-key-for-Wiener-model.html

For a temporary fix cover the hole with adhesive tape.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hello from South Africa
« Reply #4 on: September 12, 2021, 08:33:01 AM »

Thank you all for the replies. I appreciate it.

Did you get your boxes from a music shop?  eBay?  Were they properly described?
I got them from ads from Facebook and other sites. Not really described, and nobody really new the condition- it was their father's or grandfather's. So it really was a gamble.

Buy or make a new spoon can be done out of a spoon. Or if you glue an appropriate sized coin over it then play it without that bass until fixed. Not too strong a glue for retro removal.swap the spoons around if its the air spoon. There are air hole mods some do that would free up a spoon .
If the 100 has that many broken reeds you might be better to source replacements easier said than done.
Can you please tell me more about the air hole mod that is done? I covered the holes with masking tape to play it. It has a few false notes, but I found that it was because of loose reed plates.

You can buy a new spoon bass from Hohner.  There might be an importer in SA, if not try the Hohner C Shop.
http://www.hohner-cshop.de/en/Accordion/Diatonic/1-row/Vienna-Model-114-C/Spoon-key-for-Wiener-model.html

For a temporary fix cover the hole with adhesive tape.
Thank you Theo, I already ordered the bass spoon from Germany. Unfortunately there is no local importer (not that I know of).
What do you say, is it worth replacing the reeds on the 1040.
Would it be possible to fit a set of C reeds on the blocks made for A-reeds? I would like to have it in C.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hello from South Africa
« Reply #5 on: September 12, 2021, 09:21:10 AM »

You can buy a new spoon bass from Hohner.  There might be an importer in SA, if not try the Hohner C Shop.
http://www.hohner-cshop.de/en/Accordion/Diatonic/1-row/Vienna-Model-114-C/Spoon-key-for-Wiener-model.html

For a temporary fix cover the hole with adhesive tape.

Welcome to a mine of invaluable information, advice and experience.

I bought my replacement spoons for my HA-113 from Charlie Marshall - cheaper and much quicker service than Hohner.

http://www.cgmmusical.co.uk/


Graham

Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hello from South Africa
« Reply #6 on: September 12, 2021, 10:34:56 AM »

Thanks Graham. I looked at Charlie Marshall's price for spoons, but his price is more than double that of Hohner (in our currency)- 15 Pounds against 8.66 Euro. Yes I know, Hohner is very slow. I have ordered harmonica parts from them and it took a long time to reach me.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello from South Africa
« Reply #7 on: September 12, 2021, 10:39:41 AM »

If you could find a set of C reeds they will fit the 1040. C is a bit higher pitch than A so some of the the C reeds might be slightly shorter. Worst case you might have to insert some small pieces of wood to reduce the length of the reed chambers, but probably that won’t be necessary.
I have some old stock Hohner reeds I’ll check and see if there is a C set.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hello from South Africa
« Reply #8 on: September 12, 2021, 10:45:03 AM »

Thank you Theo, I already ordered the bass spoon from Germany. Unfortunately there is no local importer (not that I know of).
What do you say, is it worth replacing the reeds on the 1040.
Would it be possible to fit a set of C reeds on the blocks made for A-reeds? I would like to have it in C.

The merits of replacing the reeds is, largely, dependant on the the condition of the rest of the box. It seems odd that so many reeds are actually broken, maybe it has been used as a supply of spare parts and a dump for gash ones, but that doesn't really make sense.

If you want to replace the reeds Charlie Marshal puts together sets. It might be worth contacting him for a price (email address is on the page linked to below). He posts worldwide and uses Paypal. Don't forget they will need valves. Charlie is a mine of information and a top bloke.


http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

[Crossed with Theo's post. That could be a much better option.]
« Last Edit: September 12, 2021, 10:46:48 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hello from South Africa
« Reply #9 on: September 12, 2021, 12:24:40 PM »

Thanks Graham. I looked at Charlie Marshall's price for spoons, but his price is more than double that of Hohner (in our currency)- 15 Pounds against 8.66 Euro. Yes I know, Hohner is very slow. I have ordered harmonica parts from them and it took a long time to reach me.

Really? You do surprise me. When I bought mine (admittedly about 10 years ago) Charlie was about 30% cheaper than Hohner. Maybe their prices have dropped substantially.  The great thing about Charlie is he seems to have magic powers - your order is completed and posted almost before you've finished placing it! His parcels seem to arrive faster than anyone else's too......

Thanks for the info, though - I have an ancient 1040 awaiting rebirth.

Cheers
Graham
« Last Edit: September 12, 2021, 12:27:58 PM by Graham Spencer »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hello from South Africa
« Reply #10 on: September 12, 2021, 12:37:18 PM »

If you could find a set of C reeds they will fit the 1040. C is a bit higher pitch than A so some of the the C reeds might be slightly shorter. Worst case you might have to insert some small pieces of wood to reduce the length of the reed chambers, but probably that won’t be necessary.
I have some old stock Hohner reeds I’ll check and see if there is a C set.
Thank you Theo, I really appreciate. Please let me know if you find something.
Logged

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hello from South Africa
« Reply #11 on: September 12, 2021, 12:46:17 PM »


 It seems odd that so many reeds are actually broken, maybe it has been used as a supply of spare parts and a dump for gash ones, but that doesn't really make sense.
I think it came from the coast and the reeds got rusted and stuck when it was played. The broken off tongues that came out of the box when I opened it, was rusted.
I have an old Gallotone (Scholer) concertina (with the unified reed plates) with also a lot of broken (brass) reeds. The reed plates was very corroded an I think the reeds also got stuck and broke.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello from South Africa
« Reply #12 on: September 12, 2021, 07:09:49 PM »

Just noticed this on facebook

https://m.facebook.com/SAFreeReed/
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello from South Africa
« Reply #13 on: September 13, 2021, 03:59:11 PM »

Email sent about C reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hello from South Africa
« Reply #14 on: September 15, 2021, 08:11:16 AM »

Thank you Theo, I appreciate it.
Logged

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hello from South Africa
« Reply #15 on: September 17, 2021, 02:54:42 PM »

Can I please ask another (maybe stupid) question?
I can have an old big (I think Frontalini) piano accordion for next to nothing. Would it be possible to harvest reeds from it and tune it to work for the 1040 pokerwork? How much filing and tuning is needed to do that?
Thank you for your help.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Hello from South Africa
« Reply #16 on: September 17, 2021, 03:01:12 PM »

Can I please ask another (maybe stupid) question?
I can have an old big (I think Frontalini) piano accordion for next to nothing. Would it be possible to harvest reeds from it and tune it to work for the 1040 pokerwork? How much filing and tuning is needed to do that?
Thank you for your help.
Some melnet members regard that as standard practice. If locally you are in a place where replacement reeds are difficult to get it's a good idea. Scrap PA's are also a source of replacement key springs.
Logged

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Hello from South Africa
« Reply #17 on: September 17, 2021, 03:18:41 PM »

I am in South Africa, so there is really nothing available here. Everything must be importer from Europe, England or USA. I tried to order concertina reeds from Czech republic, but they charged me 125 Euros for shipping only. And our currency is 20:1 against the Pound, 17:1 against the Euro.
It is a nightmare.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hello from South Africa
« Reply #18 on: September 17, 2021, 03:52:18 PM »

If you have plenty of time and an aptitude for teaching yourself new skills then the piano accordion reeds is a viable choice.  Be prepared to ruin a few reeds and learn from your mistakes!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Online Online
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hello from South Africa
« Reply #19 on: September 17, 2021, 04:08:24 PM »

In my case (it may not happen to you!) since I started to mess about with repair my own instruments, I got that 'messing about bug'! Now I spend more time modifying and repairing my instruments than I do playing them.
Just be careful in case it gets you too.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal