Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Repairing a Soviet-era Bayan  (Read 2931 times)

0 Members and 1 Guest are viewing this topic.

Nick Jainschigg

  • New Starter
  • Offline Offline
  • Posts: 3
Repairing a Soviet-era Bayan
« on: September 12, 2021, 07:26:30 PM »

Hi-
I'm interested in learning to play the bayan. My musical experience is limited to forty-odd years ago playing flute. I have no experience playing any form of accordion. Since new bayans are tremendously expensive and I have no idea if I'll even succeed, I decided to buy a very inexpensive old Soviet bayan and bring it up to playability. I bought a "Rubin" brand bayan, evidently dating from the 1960s in Tula, South of Moscow. It had been stored in an attic, and the leathers are all bent and dry, and the convertor mechanism (for switching between stradella and free bass) has a broken linkage. The valve material also seems to be degraded and needs to be replaced. Otherwise, it seems OK ;D

I figured something of Soviet manufacture could be fixed with a tire-iron and a blowtorch, but I seem to have underestimated the original makers.

After opening the bass section, I found that only one of the reed banks was easily removable with a couple of small screws. The other appears to be waxed in, with a surrounding collection of small nails that appear to be more for positioning than actual attachment. I would need to remove it to get access to remove the old leathers, clean the reeds, and attach new leathers. I've gotten a bottle of gasket sealant, as per accordionrevival.com, to affix the new leathers, and a collection of replacement leathers.

What I'm wondering is how to remove the waxed-in bank of reeds. I was thinking a heated, flexible knife would be good, as it needs to bend around the box corner to get under the reeds and the size of the reed bank means I can't just warm a thin, flexible palette knife and hope it will have enough heat to get through the wax. Looking at hot-knives and encaustic painting tools on Amazon turns up a few likelies, but I'm interested in any feedback from people with some experience with this process to help me select the proper tool. The pictures should give you a better idea of what I'm up against. Any advice much appreciated!
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Repairing a Soviet-era Bayan
« Reply #1 on: September 12, 2021, 09:45:27 PM »

you need to remove the reeds not the fixed blocks, take off the pins first than remove the reeds one by one, mark them all-both reeds and the blocks- so you know what goes where ;)
once pins are removed just use a small screwdriver or a blunt knife to lift off the reeds..wax isn't that strong they should come off easily..give a little push from the corner of the reed, than you'll have the brush off & clean the old wax from both reeds and the blocks..DO not use any heated tool or heat to take them off..
same stuff you would do removable blocks anyhow         
Logged

Nick Jainschigg

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Repairing a Soviet-era Bayan
« Reply #2 on: September 12, 2021, 10:28:58 PM »

Oh, wow. Thanks! That seems pretty clear, if terrifying. I was thinking I'd need to dismount the reeds to get access to the leathers on the backs, as there appear to be, but hadn't thought that would be the main thing to do. Guess I'll need to set up the workbench to keep everything in order first.
Thanks again!
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Repairing a Soviet-era Bayan
« Reply #3 on: September 13, 2021, 08:22:54 AM »

Search the threads here all you need to know plus more is within
Logged
Mark Taylor
Folkloristmark

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Repairing a Soviet-era Bayan
« Reply #4 on: September 13, 2021, 08:49:34 AM »

If it’s a Bayan...e.g. it’s innards are more akin to a piano accordion, it’s worth taking a look at The Accordionists forum.
https://www.accordionists.info/
For blow by blow instruction on how to restore accordions, see here
https://accordionrevival.com/
« Last Edit: September 13, 2021, 08:51:37 AM by RogerT »
Logged

Nick Jainschigg

  • New Starter
  • Offline Offline
  • Posts: 3
Thanks
« Reply #5 on: September 13, 2021, 04:15:40 PM »

Thanks, all! I've been using accordionrevival.com for my basic info, but was thrown off by the fact that many sources say that removing the reed blocks was an essential part of preparing for leather replacement, and i just couldn't see how that would be done in my case. I'm making a pin-puller this week, and hope to start the leather replacement within a reasonable time. I'm certain I'll be popping in here a lot to research and pester you with questions! Thanks again
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repairing a Soviet-era Bayan
« Reply #6 on: September 13, 2021, 04:22:31 PM »

Make sure you get proper valves to use as replacements, don't be tempted to make your own diy ones.   Valves are critical to getting a good sound and are cheap in comparison with the investment of time you are about to make.   Poor quality valves can be noisy, may not open and close efficiently, and can restrict airflow through the reeds. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Thanks
« Reply #7 on: September 14, 2021, 12:19:56 AM »

Thanks, all! I've been using accordionrevival.com for my basic info, but was thrown off by the fact that many sources say that removing the reed blocks was an essential part of preparing for leather replacement, and i just couldn't see how that would be done in my case. I'm making a pin-puller this week, and hope to start the leather replacement within a reasonable time. I'm certain I'll be popping in here a lot to research and pester you with questions! Thanks again

A lot (but not all) melodeons have removable reed blocks held in place by an easily released clamp. That's why your sources told you to take the reedblocks out as a prelimnary to removing and working on the reed plates. Your bayan has glued in reed blocks so you just have to take the reedplates out with the blocks staying in situ....as Mus (invadim) said earlier.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Repairing a Soviet-era Bayan
« Reply #8 on: September 14, 2021, 08:01:05 AM »

I'm not sure what a bayan is. Some kind of chromatic CBA type thing?
I tried googling it and just got hundreds of Islamic videos.

[sorry about the tautology]
« Last Edit: September 14, 2021, 08:02:44 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repairing a Soviet-era Bayan
« Reply #9 on: September 14, 2021, 10:05:18 AM »

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Repairing a Soviet-era Bayan
« Reply #10 on: September 14, 2021, 05:16:24 PM »

https://en.m.wikipedia.org/wiki/Bayan_(accordion)

Thanks (by the way, the link was a bit odd).

These accordions seem both complicated and (for me, at least) complex. I think I'll stick to diatonics.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Repairing a Soviet-era Bayan
« Reply #11 on: September 14, 2021, 11:13:10 PM »

They tend to be B system CBAs, often with only three rows of buttons. The one I’ve worked on also had a converter mechanism on the bass side. It has huge bass reeds and has a very distinctive sound. It’s owner runs a Balalaika orchestra.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Repairing a Soviet-era Bayan
« Reply #12 on: September 15, 2021, 07:53:03 AM »

Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal