Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Spring broke on my hohner 114  (Read 2757 times)

0 Members and 1 Guest are viewing this topic.

Yooval Mann

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Spring broke on my hohner 114
« on: September 17, 2021, 02:20:52 PM »

I was playing and having fun when all of a sudden a
Button got stuck then I realised the spring which was supposed to bring it up broke!

I would like to understand please what caused the spring to break? Where to get a new one and how difficult would it be for me to replace it? Any video showing the procedure?
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Spring broke on my hohner 114
« Reply #1 on: September 17, 2021, 02:31:34 PM »

Before someone who actually knows what they are talking about responds, have look at this
https://www.youtube.com/watch?v=5st25y_0wEY&t=101s

It's for a two row, but there principle is the same

Springs break. Effect of work hardening, I suppose.

Replacement springs can be got from Charlie. Tell him what you want it for.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html

Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Yooval Mann

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Spring broke on my hohner 114
« Reply #2 on: September 17, 2021, 03:28:04 PM »

Excellent video looks very difficult for me I'll have to take the instrument to a doctor... Does anyone understand why would a spring break like that and actually more important is there anything one can do or avoid doing which will ensure the springs remain whole?

Is it a bad design on behalf of Höhner and these models? Do expensive hand made one rows do not break springs?
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Spring broke on my hohner 114
« Reply #3 on: September 17, 2021, 03:39:18 PM »

Excellent video looks very difficult for me I'll have to take the instrument to a doctor... Does anyone understand why would a spring break like that and actually more important is there anything one can do or avoid doing which will ensure the springs remain whole?

Is it a bad design on behalf of Höhner and these models? Do expensive hand made one rows do not break springs?
Springs break. They break on old cars. They break on old locomotives. They break on old accordions. Early life failure may be a manufacturing defect otherwise it's just metal fatigue excarbated by wear and (sometimes microscopic) surface corrosion. Take heart. The first one you replace yourself is always the scariest. (I've only had to do three so far).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spring broke on my hohner 114
« Reply #4 on: September 17, 2021, 03:49:53 PM »

And Hohner springs are more prone to breakage than Italian makes.  It's the design of the spring I think with a very small radius to the coil.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Yooval Mann

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Spring broke on my hohner 114
« Reply #5 on: September 17, 2021, 04:38:48 PM »

Thank you gentlemen,
I've contacted Charlie Marshall and he has the springs in Stock, I'm wondering though,
can one put better quality springs than the original Höhner ones or tweak Italian springs to work for the Höhner 114 or it doesn't work like that?
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Spring broke on my hohner 114
« Reply #6 on: September 17, 2021, 05:20:53 PM »

...can one put better quality springs than the original Höhner ones or tweak Italian springs to work for the Höhner 114 or it doesn't work like that?

If you replace it with a new Hohner  spring it is very unlikely to break again (said cautiously, but I've never had a spring in a particular position break twice).
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Yooval Mann

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Spring broke on my hohner 114
« Reply #7 on: September 17, 2021, 06:04:34 PM »

thanks! maybe if nearly all the pallets have to be removed anyway I might as well replace all the springs then and be good for a while
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spring broke on my hohner 114
« Reply #8 on: September 17, 2021, 06:46:18 PM »

Not worth it, new Hohner springs can break too,
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Yooval Mann

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Spring broke on my hohner 114
« Reply #9 on: September 18, 2021, 07:43:04 AM »

thanks so what about replacing them with Italian springs or something else which is better?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Spring broke on my hohner 114
« Reply #10 on: September 18, 2021, 08:03:30 AM »

thanks so what about replacing them with Italian springs or something else which is better?
I have played Hohners off and on for 40 plus years and have only had 2 springs break. Of the boxes that have come into my shop for repair for broken springs there has been a small number <5 with broken springs and almost entirely from the early Chinese Hohner era where they seem to have a quality control issue. So I believe you are worrying about a non-existent issue.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spring broke on my hohner 114
« Reply #11 on: September 18, 2021, 10:31:07 AM »

thanks so what about replacing them with Italian springs or something else which is better?

You would have to have the springs specially made.  I believe it is the design of Hohner springs that makes them more prone to breaking.  The coil is very tight so the wire has to be bent further when the spring is formed.  Italian springs are designed for Italian mechanisms and they are not interchangeable with Hohner.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Yooval Mann

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Spring broke on my hohner 114
« Reply #12 on: September 18, 2021, 01:51:11 PM »

Okay thanks for the information, Lester amazing and helpful videos very kind of ya, I'll do the replacement and not worry about it too much then
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Spring broke on my hohner 114
« Reply #13 on: September 19, 2021, 10:56:42 AM »

Ideally, there should be two different types of springs, one for each row. So it's a good idea not to mix the two, or at least measure the angle of the legs + their Ø and make sure they are identical. Also, to extract the rod, a small and light  chuck (such as the one available from BOSCH) is better suited than a pair of pliers and less prone to damage the rod (which bends very easily).
« Last Edit: September 19, 2021, 11:10:49 AM by diatonix »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Spring broke on my hohner 114
« Reply #14 on: September 19, 2021, 12:02:25 PM »

Ideally, there should be two different types of springs, one for each row. So it's a good idea not to mix the two, or at least measure the angle of the legs + their Ø and make sure they are identical.
This thread is about a 114 ie a one row, so only one size spring
Quote
Also, to extract the rod, a small and light  chuck (such as the one available from BOSCH) is better suited than a pair of pliers and less prone to damage the rod (which bends very easily).
Agreed, that's how I do it.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spring broke on my hohner 114
« Reply #15 on: September 19, 2021, 12:09:27 PM »

And have a second stiff wire to feed in as you withdraw the axle rod to keep all the levers and springs in place until you reach the broken spring.
Hohner standard springs wire is 0.5mm dia for short levers on inside row, 0.55mm for long levers.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Spring broke on my hohner 114
« Reply #16 on: September 19, 2021, 12:09:56 PM »

Sorry, Lester! I forgot to quote Greg and his youtube link. Love your tutorials, by the way!
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Spring broke on my hohner 114
« Reply #17 on: September 19, 2021, 04:38:05 PM »

Yes, of course occasionally a spring breaks - as do other parts.  I tend to agree it became an issue with the early production Chinese boxes.  My suspicion is that the springs were gripped overly tightly during bending, marring the wire at the very point they flex most.  The marring would then act as stress risers promoting crack propagation.  One time Ivor Hyde was sorting an ebay.de purchased Club for me and couldn't get springs from Germany (they had rusted!) but got some from the Swiss factory.  They were highly polished and appeared to be gold plated!  The Swiss have a history of making good springs for some reason.

Not long ago a good friend invited me to visit whilst she replaced a broken treble spring in a Pokerwork.  Not that I contributed anything to the work in hand, but it helps keep one's sanity having an interested party to chat with during a fiddly job.   I also benefited from refreshments.  The only unusual tools which can help is a small crotchet hook and an electrical screwdriver with a notch in the blade, the first to hook a spring and pull it into position and the second to push them into place.  Of course in the absence of a crotchet hook an angled notch in the side of the screwdriver does the same.  It can all be done with the fingers but it makes my fingertips rather sore.

I used to know a guy who made his own springs from stainless spring wire.  I requires a former to be built and he used a small plastic tube slipped over the leg of the wire so as to apply force at the right point without damage to the wire.

Rob
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Spring broke on my hohner 114
« Reply #18 on: September 19, 2021, 06:38:49 PM »

Yes, of course occasionally a spring breaks - as do other parts.  I tend to agree it became an issue with the early production Chinese boxes...

Rob

I'm not sure of the dates of the "early Chinese" melodeon dynasty, but my Chinese Pokerwork broke a bass spring after about a year's very frequent playing. It has never broken another, though it did break one hinge pin, which I replaced with a Hornby Dublo track pin. I bought it new, 2013ish  (as an aside, it's a much better box than some discussions in this locality would have you expect).
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Spring broke on my hohner 114
« Reply #19 on: September 19, 2021, 09:35:55 PM »

Quote
I used to know a guy who made his own springs from stainless spring wire.  I requires a former to be built and he used a small plastic tube slipped over the leg of the wire so as to apply force at the right point without damage to the wire.

Fair enough, but it doesn't have to be complicated.  A guitar string of the correct diameter is a good source of wire, and the length of wire can be bent around a drill bit (driven in a wood block or chucked in a drill press), while stretched between pliers (Vise-Grip type preferable).
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal