Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dino baffetti black pearl iii Spring Repair  (Read 1321 times)

0 Members and 1 Guest are viewing this topic.

melod-ian

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 295
Dino baffetti black pearl iii Spring Repair
« on: September 23, 2021, 01:08:08 PM »

Hi all

I thought it was about time I repaired a treble spring for my black pearl, I had brought it with a rubberband repair job (I know!, should have complained about that)

Never done a repair on a stepped keyboard..

I was expecting to remove the fingerboard from the two screws inside but it's glued on..Do I just pull out the axle rod in this case?

I’ve got a bag of Honer treble springs, once I get in are these ok to use?

cheers in advance

Ian

Logged
3 x Acadian's (C,Bb,A),
Hohner corona iiir (GCF)
PS Black Pearl (DG)
and the old hohner erica (DG)

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dino baffetti black pearl iii Spring Repair
« Reply #1 on: September 23, 2021, 01:41:17 PM »


Do I just pull out the axle rod in this case?


Yes, but 'just' is doing a lot of heavy lifting in that sentence.
My approach is to first label the keys 1 - 19 masking tape is what I use
Remove the grille
Remove the little cap over the axel on the bottom of the keyboard
DANGER Grasp firmly the protruding bit of the axle, I use a small drill chuck, rotate the axle whilst trying to withdraw it, this can prove very difficult especially if there is beer etc down in the hinge pieces. After much swearing and perseverance the axle should start to move and then the keys will start to pop off individually. Keep going til you reach the broken one.
Replace the spring
MORE DANGER then carefully reseat each key and reinsert the axle taking care that it id properly aligned as you can damage the hole and thus make the key sloppy.
Robert's your father's brother.
Quote

I’ve got a bag of Honer treble springs, once I get in are these ok to use?
Hohner springs are no use at all, Charlie Marshall does a bag of mixed Italian springs which will offer up suitable replacements

Good luck

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dino baffetti black pearl iii Spring Repair
« Reply #2 on: September 23, 2021, 03:05:49 PM »

Picture of the type of spring and the keyboard from a box I repaired which had the fingerboard snapped off


https://photos.app.goo.gl/N5wexAQrdpccsxyW9

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Dino baffetti black pearl iii Spring Repair
« Reply #3 on: September 23, 2021, 03:42:47 PM »

If you needed any more confirmation, I can confirm that the above, in particular the DANGER indicators, is all very good advice. The whole thing really is sprung load to self dissassemble, and you really do want your buttons to go back into the same position they came from.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Dino baffetti black pearl iii Spring Repair
« Reply #4 on: September 23, 2021, 03:56:49 PM »

"which had the fingerboard snapped off"

I'll bet that brought a tear to the owner's eye!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dino baffetti black pearl iii Spring Repair
« Reply #5 on: September 23, 2021, 03:59:48 PM »

"which had the fingerboard snapped off"

I'll bet that brought a tear to the owner's eye!
Interesting job to repair it though


Here's the other  bit

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Dino baffetti black pearl iii Spring Repair
« Reply #6 on: September 23, 2021, 04:15:01 PM »

A bit of precision gluing, I fancy?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Yooval Mann

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Dino baffetti black pearl iii Spring Repair
« Reply #7 on: September 23, 2021, 04:15:21 PM »

Strange that a spring breaks on an Italian quality box
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dino baffetti black pearl iii Spring Repair
« Reply #8 on: September 23, 2021, 04:38:46 PM »

Strange that a spring breaks on an Italian quality box
Things break on everything, manufacturing defect, bad luck, etc. I've replaced broken reeds on Castagnaris as well as Hohners

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Dino baffetti black pearl iii Spring Repair
« Reply #9 on: September 23, 2021, 06:57:44 PM »

I place an elastic band around the length of the keyboard - it stops the keys flying out.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

melod-ian

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 295
Re: Dino baffetti black pearl iii Spring Repair
« Reply #10 on: September 23, 2021, 07:00:22 PM »

Thanks for the advice
In this case, on further inspection the rubber bands actually weren’t there to replace a broken spring – so, just needed to remove them!

But, good advice for the future.

I’ve replaced springs on Erica’s and Acadian’s (different springs on an Acadian)

What I can see is the method is somewhere between the two, only without removing the fingerboard I’m thinking it’s a bit of guesswork to line up spring/rocker/axel is that right?   
 
Logged
3 x Acadian's (C,Bb,A),
Hohner corona iiir (GCF)
PS Black Pearl (DG)
and the old hohner erica (DG)

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dino baffetti black pearl iii Spring Repair
« Reply #11 on: September 23, 2021, 07:10:37 PM »

What I can see is the method is somewhere between the two, only without removing the fingerboard I’m thinking it’s a bit of guesswork to line up spring/rocker/axel is that right?
Not really, the spring mounts in the bottom of the key woodwork, you then insert the key into the correct slot and start the axle though the hole on the key. This is the tricky bit because you can't see the axle or the hole, the axle has a sharpish point so if you are not correctly aligned and a bit over enthusiastic you can damage the hole or worse still push the axle into the wood of the key and cause all sorts of problems. Ask me how I know :)


Removing the axle can also be a real pain, cue Rees with his car battery, smoking keyboard, anecdote
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal