Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner "H" reeds.  (Read 2045 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Hohner "H" reeds.
« on: October 20, 2021, 11:22:09 AM »

Good morning all.
I was sorting through my Hohner reed collection for reeds to make up a chord set for an Erica when I realised that, contrary to my hitherto supposition, Hohner "H" reeds on zinc plates are not all the same.
For a start, although I think that both of these are on zinc plates, the colour of the plates would seem to indicate that they're not exactly the same metal, and the lighter colour looks as if it stains more easily.
The actual reeds have been ground very differently, too. As can be plainly seen, one has been ground transversely and the other along the length. The "H" has been hand stamped on the darker coloured one (I deduced this as on all those plates the stamping is more or less deeply imprinted) whereas the lighter ones have been uniformly done. One of the dark coloured plates has the stamp on the rivet end.
The lighter plates all have rounded corners, too. Funnily enough, the "lighter" plates are actually heavier, those in the picture are both D/D and the lighter coloured one is .6 of a gram heavier than its counterpart.
Both reeds came from almost identical (scrap!) Hohner Student PA's.
So, my question of the day is directed at those experts who regularly work with these older reads, "Is one better in any way then the other?"
« Last Edit: October 20, 2021, 11:24:44 AM by Winston Smith »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hohner "H" reeds.
« Reply #1 on: November 13, 2021, 03:49:00 AM »

Probably different parts runs. Alloy may have varied based on availability if the economy was bad. I have worked on boxes that had mixed aluminum and zinc reeds.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner "H" reeds.
« Reply #2 on: November 13, 2021, 08:13:41 AM »


So, my question of the day is directed at those experts who regularly work with these older reads, "Is one better in any way then the other?"

While you wait for the experts, have you tried putting them in  a box and listening to them?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner "H" reeds.
« Reply #3 on: November 13, 2021, 08:32:16 AM »

Hohner reeds have gone through many changes over their long history. Well done for spotting some of the subtle differences.  Your photo shows another change that you don’t mention — the shape of the “H” one is wider than the other.  The length ground reeds are thought to be higher quality than the others.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Eshed

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 447
Re: Hohner "H" reeds.
« Reply #4 on: November 13, 2021, 08:43:02 AM »

I have a set of the round corner reeds. IIRC they were mounted on leather and not waxed.
Was it also the case in your box?
Logged
Do you have a Hohner from 1934-1945 with a serial number on?
Send me a private message or comment on the German Accordion Problem spreadsheet to improve the statistics of the project and get an estimate of the production date of the box if it is not known.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner "H" reeds.
« Reply #5 on: November 13, 2021, 12:39:20 PM »

Wow! Thanks Kimric, for starting off that sudden run of replies, I'd actually given up hope.

"boxes that had mixed aluminum and zinc reeds."

Yes, I've had one or two through my hands like that. What has puzzled me many times is why the bass reeds are (more often then not) T marked against H marked chord and treble? I currently have one Hohner with a right mixture; aluminium stamped "Hohner", H stamped zinc, T stamped zinc and ali and a goodly number of ali and zinc ones with the (Italian?) stamped line across the corner!
I have also noticed that H marked bass reedplates (in my limited experience) are a touch longer than those marked with the T. At first, I thought that maybe they were trying to save space by using slightly less high blocks, but the blocks actually turned out to be the same size, anyway!

"have you tried putting them in  a box and listening to them?"

Greg, I'm just a butcher cutting up meat that would be otherwise 'unfit for human consumption'! My ears only pick up whether a note is somewhere near. I've no delusions of grandeur.

"The length ground reeds are thought to be higher quality than the others."

I had read that, somewhere, and can (almost?) imagine that the springiness should be much more stable when longitudinally ground, and that crosswise grinding may tend to weaken the structure.

"mounted on leather and not waxed."

No. Both were nailed and waxed. I have a 3 voice box with gaskets under the bench, but it could be there for a long time! I spent many an unhappy hour making gaskets by hand when I was working, and don't really relish the idea of making a set for for the 90 treble and 4 voice bass and chord reeds involved!

Thanks all four for your comments, most appreciated!



Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hohner "H" reeds.
« Reply #6 on: November 13, 2021, 05:25:43 PM »

I have not found any meaningful difference in breakage on reeds based on how they are ground/filed. I did a analysis of about 100 broken reeds from repairs and found that the breaks occur in roughly the same area no matter how badly they were filed/ground and only one looked like the filing had anything to do with the break location.
 There was even a chinese reed that had been factory tuned so aggressively that a small discoloration occurred, but it did not break there.
 Grinding across makes the most sense from a manufacturing point.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner "H" reeds.
« Reply #7 on: November 13, 2021, 06:13:13 PM »

Mmmm. What may seem to be logical isn't, in all cases.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Hohner "H" reeds.
« Reply #8 on: November 14, 2021, 05:35:33 AM »

This shines light on why my black dot and others dont sound great but the box i have in for a favourfettle does. Picture before work below.
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner "H" reeds.
« Reply #9 on: November 14, 2021, 09:45:22 AM »

I have not found any meaningful difference in breakage on reeds based on how they are ground/filed. I did a analysis of about 100 broken reeds from repairs and found that the breaks occur in roughly the same area no matter how badly they were filed/ground and only one looked like the filing had anything to do with the break location.
 There was even a chinese reed that had been factory tuned so aggressively that a small discoloration occurred, but it did not break there.
 Grinding across makes the most sense from a manufacturing point.

How to distinguish whether Chinese or German reeds ?? my 114 1 row, is T upside down ,, ::)
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner "H" reeds.
« Reply #10 on: November 14, 2021, 10:48:13 AM »

"my 114 1 row, is T upside down"

Not to worry there, Uncle Risto, we'll ask smiley about them, they're bound to be Australian!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Hohner "H" reeds.
« Reply #11 on: November 14, 2021, 11:38:28 AM »

This shines light on why my black dot and others dont sound great but the box i have in for a favourfettle does. Picture before work below.

What are we looking for (in the picture)?
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner "H" reeds.
« Reply #12 on: November 14, 2021, 11:42:57 AM »

"my 114 1 row, is T upside down"

Not to worry there, Uncle Risto, we'll ask smiley about them, they're bound to be Australian!

Ok.. Thanks Edward ,,, ;)
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hohner "H" reeds.
« Reply #13 on: November 14, 2021, 05:12:39 PM »

The chinese reeds often have poorer tolerances, and the setup is often not that good. a lot of improvement can be made by gapping the reeds properly (sometimes the gap runs the whole length of the reed) and in extreme cases chasing the aluminum in to close up clearance problems.
 Upside down high reeds improves performance. I find I have to backfill the reed chamber and plug the hole drilled in the block (!?) to get a better sound out of the high reeds.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner "H" reeds.
« Reply #14 on: November 15, 2021, 04:35:08 AM »

Thanks ,, I have one set of Chinese Hohner G-reeds,
(new) I'm wondering if I dare to use them .. My 114 boxes have very rusty reeds ..
Maybe I can use these Chinese reeds ,,??   Or I try to clean the originals. 
Big work, and can I get good ones out of them ..  I have to think
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hohner "H" reeds.
« Reply #15 on: November 15, 2021, 07:36:18 AM »

It won't hurt anything to use them, they may just not sound that good. They can be improved by proper gapping and adjustment.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner "H" reeds.
« Reply #16 on: November 15, 2021, 07:53:49 AM »

this is what I have heard, but. I have very little practice in tuning  :-\
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal