Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Wot no fondo.  (Read 3080 times)

0 Members and 2 Guests are viewing this topic.

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Wot no fondo.
« on: November 02, 2021, 10:51:36 PM »

Heloo people, thought i would share this, just got it somewhere near tuned.

https://youtu.be/-4Z7VOnPGRQ

16 key bc 2 voice.

No fondo, pallets are straight onto the block. Which is removable from front or back, slides out of position.
The keyboard pulls straight out, there is also screw on the underside of the keyboard to alter spring tension.
The buttons are on 2 axles so the pallets lift off the same distance on both rows - both rows have same length arms.
Initial idea was to allow as many voices as i want, and easily swappable, but 2 will do for now.

No basses at present.
All parts except the bellows tape and some new valves recycled, though did need to buy a bit of aluminium for the lever arms. Reeds are scavenged from an old paolo soprani continental chromatic, solder tuned.
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Wot no fondo.
« Reply #1 on: November 03, 2021, 12:32:56 AM »

It's beautiful, and intriguing!

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Wot no fondo.
« Reply #2 on: November 03, 2021, 12:55:57 AM »

Well look at that, well done!
Logged
Too many accordions, help!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Wot no fondo.
« Reply #3 on: November 03, 2021, 03:50:48 AM »

Ha! Cool!
Logged
C#/D player

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Wot no fondo.
« Reply #4 on: November 03, 2021, 10:22:16 AM »

It's absolutely lovely ... well done!

But in response to the thread title I do think that it HAS got a fondo from my understanding of what fondo means.  I thought it meant the "block" you refer to the pallets going straight on to ... i.e. the wood surface that the reed blocks attach to, sometimes called a soundboard.  What it doesn't have is a grille.

I don't think it's possible to create a melodeon that *doesn't* have a fondo.

Or have I misunderstood the term for many many years?
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Wot no fondo.
« Reply #5 on: November 03, 2021, 12:14:56 PM »

A truly beautiful piece of work. The key mechanism is brilliant! 
A piece of art ……and plays brilliantly  (:)
« Last Edit: November 03, 2021, 12:42:59 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Re: Wot no fondo.
« Reply #6 on: November 03, 2021, 01:58:56 PM »

Trying to understand, based on attending the Pariselle making course.

On the traditional design, reedblocks can be taken out, while the fondo is a thin board or alu sheet which is fixed in place in the accordion.
The reedblocks are clamped  so that they contact the back of the fondo, holes aligned with holes. Then the pallets operate on the holes on the front of the fondo.
I assume that with this WotNoFondo design , the holes at the ends of the reedblocks are presented directly to the pallets, without an additional fondo sheet in the way.
So there would have to be some way of sealing around the reedblocks.
Is that right?

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Wot no fondo.
« Reply #7 on: November 03, 2021, 02:21:23 PM »

Ah OK ... thanks for that Jack ... I didn't clock the significance of the 3rd picture ... so the reed block slides directly in to a gap in what the fondo would be traditionally ?  That really is a different type of design!

Congratulations Gav!  I too am intrigued as to how it is sealed so that no air leaks through the join.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Wot no fondo.
« Reply #8 on: November 03, 2021, 03:02:34 PM »

Just realised that both button rows are on the same reed block. (16 wide) I see that the reeds are butted together, I think bottom lip sealed and single top screwed to allow this density. Could I ask …. how is the reed block sealed?  Gasket only under the reeds?
I have thought about trying this approach (close butting of reeds), bottom sealing and employing a single top screw to increase density so keen to know of any pitfalls. I am currently using neoprene foam.

Ta
« Last Edit: November 03, 2021, 04:43:54 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Wot no fondo.
« Reply #9 on: November 03, 2021, 06:13:51 PM »

Sealing the blocks- easier to draw it out see pic below.
Each block has a gasket half lapped into the back. You can see them on the inside picture above i think.
The blocks are free floating, but pushing the fingerboard in pushes all the blocks together sealing the 3 together, this also stops the fingerboard from dropping out. I currently have not finished the seal for the angle joint, you can see the tape in the picture, probably going to change the closure design to get rid of the 2 remaining bellows pins.

Reeds are fit to the block, there is no gasket. Some where the reed tongue side was too wide and fouled the block, the block has a small cut out to get a good fit. A few have had a small amount of sealant added to the top, i use a low tack sealant i have used for years that rubs off when you want to remove.

I have a spahni tell cf that has similar block layout, no gasket or sealant.

Will post some more pics later.
« Last Edit: November 03, 2021, 06:15:39 PM by Gav Wood »
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Wot no fondo.
« Reply #10 on: November 03, 2021, 08:31:50 PM »

Bass side

The strap is an old belt with velcro from an ikea mattress packaging attached. A block is screwed to each end of the leather which slots in the side of the frame, when the cover is put on and the velcro is joined, it all stays in place with no screws or other catches. I have left enough space to cut basses and mechanism in, the reeds would go in the hollow in the bellows.
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Wot no fondo.
« Reply #11 on: November 03, 2021, 08:58:51 PM »

Bellows are attached using hook and pins on the treble side a la shand morino; bolted on the air button side.

I wanted no pins to leak as have had problems with that before.
Before i decided to have the gasket 1/4 of the way up, i put an internal lip on the bellows which would allow the pins to be fitted, but the internal and external anchors are outside the gasket. I think this may be my best idea of the whole lot. It came from not wanting a visible bellows frame as that would spoil the look of the maple framed in ebony, this is now redundant however as the pins are now not near the internal space.

I will probably have another go at making the bellows, the corners are not very even and glue leaked through the cloth at the gussets giving an uneven finish. The cloth i like though, it was a jeff banks shirt i “grew out of” in the stomach area.
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Wot no fondo.
« Reply #12 on: November 03, 2021, 09:36:40 PM »

Last one.
Mechanism photos below.
The levers are ebony with aluminium arms cut into them, and brass bearings made from an old brass shooting bolt.
The springs are wound from piano wire, a lot thicker but longer than springs i have elsewhere. The reason is they are all mounted on the same tension rod. The point the spring touches the arm is the same distance from the rod for both inside and outside button arms. With an extra turn on the inside button springs, this means the springs are the same length, so rotating the spring tensioner puts the same tension into inside and outside rows of buttons. I have not tested it with exact weights but seems to work. 

I put the axles in the same level as the fingerboard, this let the buttons not foul the fingerboard opening, and have a lot smaller holes. All others i have seen seem to be below this level, and need larger holes as the buttons go ito the fingerboard at an angle.

The axles and other steel rod is an old oven shelf, the thinner bits with thread cut in it for the spring tensioner. The tensioner wheel came from a very welcome christmas present of all brass opera glasses, and toy telescope, think it was middleoflidl. Loads of spare brass to make things from.

All the ebony is old violin fingerboards. The maple i was given, but would not use the same again, it is slab cut so warped when cut, and had to be reinforced then planed back, see ebony reinforcement on inside pics above.

Fingerboard is quarter cut maple laminated onto aluminium.

Think thats it.
Logged

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Wot no fondo.
« Reply #13 on: November 03, 2021, 10:24:12 PM »

Wow!  I really enjoyed reading those last posts.  Thanks for sharing the photographs.  A really really nice build and a great innovative design.  Particularly liked the reed block held and sealed by compression.  Also the close pitching of reed plates on block is something I will try at some point.  The fingerboard and mechanism is also perfection.  The button fit is perfect.

Also nice to see ebony and maple being used. Great finish.

Strangely enough I also used an old shirt on my last set of bellows …..

Thanks again for sharing ….. it has got me thinking 👍
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Wot no fondo.
« Reply #14 on: November 03, 2021, 10:42:22 PM »

Thanks John.

There is a bit of experimentation with the reeds and treble setting aswell. First tuning i went for something on the lines of lesters spreadsheet, but the top end didnt work for the box that wet. The flat bellows end was aimed at stability, but think it may help with acoustics, the vibrations do not go down the bellows chamber. Tuning was aimed at something like the pictures below, i dessicated the top end a lot from first tuning. The notes between are way out at present, but have found this a lot before with old reeds, even after cleaning and derust, the reeds take a time to settle and retune.
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Wot no fondo.
« Reply #15 on: November 03, 2021, 10:51:00 PM »

Doh. Pictures.
Logged

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Wot no fondo.
« Reply #16 on: November 03, 2021, 11:28:20 PM »



Really nice and beautiful work. I think I understood most of the tricks?
But if you want a completely hidden lock, you can use strong magnets according to this youtube page

https://www.youtube.com/watch?v=F-GMl11gAUk
or
https://www.youtube.com/watch?v=Iy-aFegKZ4s&t=46s

or something similar?   

Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Wot no fondo.
« Reply #17 on: November 04, 2021, 12:29:40 AM »

But if you want a completely hidden lock, you can use strong magnets according to this youtube page

Stockaryd, you must have missed this discussion of one maker's use of rare-earth magnets in his accordions. Some contributors expressed concern about strong magnets possibly causing danger to people who have heart pacemakers, or wiping credit cards. As far as I know there have been no incidents. Yet.  ;)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wot no fondo.
« Reply #18 on: November 04, 2021, 07:57:48 AM »

Thanks John.

There is a bit of experimentation with the reeds and treble setting aswell. First tuning i went for something on the lines of lesters spreadsheet, but the top end didnt work for the box that wet. The flat bellows end was aimed at stability, but think it may help with acoustics, the vibrations do not go down the bellows chamber. Tuning was aimed at something like the pictures below, i dessicated the top end a lot from first tuning. The notes between are way out at present, but have found this a lot before with old reeds, even after cleaning and derust, the reeds take a time to settle and retune.

You could try revering the top reeds so that the tongue points toward where the fondo would be instead of upwards and also fill a third to a half of the reed chamber volume with a wedge of wood.  And remove the valves from those reeds as well.

I’d be interested to hear what tuner you use.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Wot no fondo.
« Reply #19 on: November 04, 2021, 08:26:38 AM »

The blocks at the top already have some volume out of the chambers, i made the block like the original the reeds came out of, the back of the chamber is curved. Photo below of the original block the reeds came out of, i copied the shape.

The tuner is bill farmers freeware tuner, got the download link off this site. The app is called tuner.
Tuning is set to quarter comma meantone in D.

May have a go at reversing one key when i am doing the retune.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal