Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Reed block materials . . . ?  (Read 2860 times)

0 Members and 1 Guest are viewing this topic.

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Reed block materials . . . ?
« on: December 11, 2021, 11:07:57 AM »

OK, there's no one answer to this, and the sound quality or timbre of an accordion is ultimately a product of a complex interaction of a multitude of different components, materials etc etc. (And the subjectivity of the listeners ears)

But does anyone have any insights - or better still practical experience - of the effect (if any, however small) on sound quality of different woods that might be used for the construction of reed blocks?
 
I'm aware of cedar (yellow & western red), alder, pine, sycamore, walnut, something that looks much like poplar, all being used.  And of course any particular species of wood can vary in its qualities depending on growth rate, ring density etc of the particular bit of tree it came from.

The method of mounting the reeds - screwed or waxed - might also influence the choice of wood, as might the method of construction of the block - whether built up from components or machined out one piece of wood. So what about their effect in turn on sound quality?

So a huge number of variables - and while I have my own thoughts I'd be fascinated to know if anything consistent can be learnt from it all . .

Discuss . . . .!

Thanks,
Graham
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed block materials . . . ?
« Reply #1 on: December 11, 2021, 12:13:37 PM »

Try this thread, balsa and construction foam/ply sandwiches

http://forum.melodeon.net/index.php?topic=7417.0

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed block materials . . . ?
« Reply #2 on: December 11, 2021, 12:23:09 PM »

I suspect you'll get the same answer as similar questions about fondo/soundboard/case material -- some people think it makes a significant difference, others don't, but in reality there haven't been any proper tests done to prove it one way or another because they'd need to be double-blind (to prevent presenter/listener bias) and extensive (to get statistically reliable results), and it's just too much effort.

Every time the similar question about case material comes up (with people insisting it *does* make a difference) I post this from the Strasser website:

Wood (body material)

Because the body of a diatonic accordions – unlike, for example, guitars and violins – is not a resonance body, the material from which it is made does not affect the instrument’s sound. We use multi-layered wood that is produced especially for us and which has proven itself thanks to its light weight, high stability and high resistance to distortion for more than 30 years now. Although advertised with “resonance wood” and other freely invented terms, test results from universities and research institutes have verified that the sound of an accordion is not affected by its body material.

We have performed many tests with various materials (metal, plastic, various solid woods, and plywood) and were therefore able to determine for ourselves that the body material has no effect on the instrument’s sound. The sound of an accordion is determined only by the reed blocks, the reed type and material, (from strong to very subtle tremolo), the treble and bass mechanisms, and the manual (keyboard) cover.


They do mention reed blocks, but this probably means the size/shape of the reed cavities/pallet holes not the material -- so long as it's reasonably stiff (any wood, including balsa) not floppy (soft plastic).

If anyone's got proper data for reed block material I'm sure everyone would love to see it -- but of course if they make boxes and *did* find a difference (and a "best" wood) they're unlikely to tell anyone and give this "trade secret" away to their competitors...
« Last Edit: December 11, 2021, 12:25:28 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Reed block materials . . . ?
« Reply #3 on: December 11, 2021, 12:23:37 PM »

“3D printed” blocks recently shown on our sister group. There was criticism here about the tone, but that might be more about the reeds?

   https://youtu.be/rsE5pnSwS4E

Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed block materials . . . ?
« Reply #4 on: December 11, 2021, 12:40:48 PM »

I think that “which is the “best” wood?” Is the wrong question.  “Which material and construction method gives the performance I want?” will get you further.  My belief is that the priority is for the reed block to resist movement, both gross distortion resulting from loads applied at fixing points and movement from within the wood, and resistance to vibration over the range of frequencies produced by the reeds.
The former are the easy ones and just require good craftsmanship. The latter are the ones that relate to qualitative changes on sound production.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed block materials . . . ?
« Reply #5 on: December 11, 2021, 12:53:49 PM »

I think that “which is the “best” wood?” Is the wrong question.  “Which material and construction method gives the performance I want?” will get you further.  My belief is that the priority is for the reed block to resist movement, both gross distortion resulting from loads applied at fixing points and movement from within the wood, and resistance to vibration over the range of frequencies produced by the reeds.
The former are the easy ones and just require good craftsmanship. The latter are the ones that relate to qualitative changes on sound production.

And to agree with Theo, how the reed blocks are made and mounted (and braced) is likely to have a much bigger effect than the wood they're made from.

The ideal is to provide a solid foundation for the reed frame which doesn't move at all, because if it does you're likely to get resonances, and if these coincide with a reed frequency you're likely to get the warbling/locking problem.

So rigid blocks solidly fastened down to the fondo/case and with cross-braces between them (and to the case?) are what is needed. But bear in mind that this doesn't make any resonances go away, it just shifts them in frequency. Heavy/dense/stiff wood might be better because it resists moving with the vibrations from the reeds, but then this is also likely to be higher "Q" than softer wood like balsa so any resonances will be narrower (less likely to be hot) but taller (worse if you hot them).

As usual there's no simple answer to a complicated problem... :-(
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed block materials . . . ?
« Reply #6 on: December 11, 2021, 01:02:54 PM »



Every time the similar question about case material comes up (with people insisting it *does* make a difference) I post this from the Strasser website:

Wood (body material)

Because the body of a diatonic accordions – unlike, for example, guitars and violins – is not a resonance body, the material from which it is made does not affect the instrument’s sound.

As any good scientist knows a single trial is not the end of the process. So in this example all we can conclude is that in the special case of the Strasser design the materials they tested don't make a difference.

More significantly there is a huge logical flaw in the last sentence above quoted from Strasser.

I agree the body of an accordion is not a resonance body like that of a stringed instrument.  But it does not follow from that that the material has no effect on the instruments sound.  The body of the instrument can also act as a selective filter, and that does indeed have the ability to affect the sound.  Selective filtering of sound can be demonstrated easily by simply changing the cloth ling to the grill for example.  This is most obvious in concertinas where the same model is often available with either wooden or a metal end frets.  Other things being equal a metal ended concertina will sound brighter, and wooden ended one more mellow because the wood an metal filter the sound differently.

Sound emerges through all parts of an accordion (including diatonic) - most via the grill, but some sound also emerges through the wooden case, the bellows, and all the internal parts between the reeds and the outside.  So In theory any part can influence the sound.  Some manufacturers do understand this and modify the grill design to get the sound they want. Best example I can think of are the modified Dino Baffettis from the Music Room that have a very open grill which contributes the the bright open loud sound. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed block materials . . . ?
« Reply #7 on: December 11, 2021, 02:35:01 PM »



Every time the similar question about case material comes up (with people insisting it *does* make a difference) I post this from the Strasser website:

Wood (body material)

Because the body of a diatonic accordions – unlike, for example, guitars and violins – is not a resonance body, the material from which it is made does not affect the instrument’s sound.

As any good scientist knows a single trial is not the end of the process. So in this example all we can conclude is that in the special case of the Strasser design the materials they tested don't make a difference.

More significantly there is a huge logical flaw in the last sentence above quoted from Strasser.

I agree the body of an accordion is not a resonance body like that of a stringed instrument.  But it does not follow from that that the material has no effect on the instruments sound.  The body of the instrument can also act as a selective filter, and that does indeed have the ability to affect the sound.  Selective filtering of sound can be demonstrated easily by simply changing the cloth ling to the grill for example.  This is most obvious in concertinas where the same model is often available with either wooden or a metal end frets.  Other things being equal a metal ended concertina will sound brighter, and wooden ended one more mellow because the wood an metal filter the sound differently.

Sound emerges through all parts of an accordion (including diatonic) - most via the grill, but some sound also emerges through the wooden case, the bellows, and all the internal parts between the reeds and the outside.  So In theory any part can influence the sound.  Some manufacturers do understand this and modify the grill design to get the sound they want. Best example I can think of are the modified Dino Baffettis from the Music Room that have a very open grill which contributes the the bright open loud sound.

I agree, it's not impossible that it doesn't have some effect, though much smaller than other factors. They do say the grille has an effect, also the mechanism -- it's all to do with the air path to and from the reeds. Metal ended concertinas do sound brighter than wood, but how much of this is due to the material itself and how much due to the fact that metal ends are thinner and usually more open than wooden isn't clear, again I'd bet that the thickness and openness are more important, as I can tell from my Oakwood and Baffetti Binci. If you compare the acoustic absorption/reflection coefficients of steel/wood/cloth you'll find that cloth makes a far bigger difference (because it's soft and absorbent) than wood vs. metal, which are both hard.

Very little sound emerges from the body, you can measure this with an ultra-close miniature microphone (yes I've done this). Rather more comes through the bellows because they're more acoustically transparent -- but still, the vast majority comes out through the grille. It's not difficult to calculate that things which effect this direct sound have a far bigger effect on the tone (frequency response) and volume than any changes to what comes through the bellows, because more than 90% of the sound comes out this way (yes I've measured this too).

However Strasser claim to have actually tested the effect of case material and found it doesn't make a difference, and if this was done in conjunction with a university I'd expect that they understand how to do valid testing...
« Last Edit: December 11, 2021, 02:44:15 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed block materials . . . ?
« Reply #8 on: December 11, 2021, 03:09:15 PM »

Moulded plastic is not uncommon, at least in some PAs, like newer Weltmeisters (and related instruments) and some models of Hohner Atlantic. In fact in some Atlantics the foot of the block is a sort of fibrous/cardboard like material. Probably not so common in melodeons.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Reed block materials . . . ?
« Reply #9 on: December 11, 2021, 04:05:44 PM »

Often you see mixed woods being used , some blocks divided by a harder piece between the banks and as in a one row where the blocks lay flat against a ply of different wood. So I’m not sure how big of a affect it has. When I did my one row I used poplar because its straight grain , mills easily, and it is a hardwood although softer, and it could hold a screw if needed. I used a piece of the cherry to divide the banks. My choices of wood came down to stable and light weight and of course basically what I already had laying around the shop (:) I don’t own a scale so I can’t weigh it but can tell you this box is light in weight and it could be just me but it seems to project the sound through the material more so than my Beltuna. Other factors are probably at work also.
« Last Edit: December 11, 2021, 04:07:18 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed block materials . . . ?
« Reply #10 on: December 11, 2021, 04:30:33 PM »

The sole plate of reed blocks need to be hard and tough to take the pressure of fixing clamps.  Beech seems to be used very often for this.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed block materials . . . ?
« Reply #11 on: December 11, 2021, 05:09:06 PM »

It's funny that this thread popped up today, given that I was about to start a similar thread sharing some of my experimentation in this area.  I'll share my experience here.

I recently did some experimentation with an accordion I had - a two-row, 3-voice (MMM) instrument with an aluminum fondo/soundboard and Voci Armoniche reeds (either TAM or A-Mano) - that had a *VERY* bright sound and was quite loud.  I wanted to see if there was anything I could do to temper or mellow out some of the highest frequencies that contributed to what I perceived as being a slightly harsh tone in places.  The first thing I did is play around with the grill; I took it off, put it back on, lined the grill with sound absorbing material, etc.  The tone of the instrument did not change at all.  At best I managed to muffle the overall sound, but even then the highest frequencies cut right through! 

Next was to look at the internals construction and design of the instrument.  I found that the entire insides - the casework, the reedblocks, the reed chambers, etc - were all heavily varnished and glossy.  It has been postulated on here before that a reflective surface within the reed chambers *might* contribute to a brighter sound, the theory being that there might be less sound absorption with a reflective surface, particularly the higher frequencies, than there might be with bare wood surfaces.  I decided to put the theory to the test and stripped the reeds off the blocks and proceeded to sand every surface down to bare wood - casework, blocks and the interior reed chambers.  I was quite diligent in doing as thorough a job as possible. When that was done, I waxed everything back in place, reassembled the instrument I found....absolutely no perceivable difference in tone or volume whatsoever!

While I wasn't particularly surprised, I have to admit that I did expect that there might have been a slight difference.  No matter - I decided to continue exploring the theory.  If the walls of the reed chambers were made of a more sound absorptive material, would it not affect the tone produced to some extent?  Without actually altering the blocks themselves any further (any changes that I had made at this point were entirely reversible if desired), I decided the easiest way to try this would be to line the back wall of the reed chambers with a thin layer of olovisc - the gasket material that is usually used for screwed-on reedplates.  Unconventional, I know, but keep in mind I was just exploring theories here.  I did this for a few of the notes in the middle of the keyboard only, which were the ones that had the harshest/shrillest tone.  As far as I could tell - **to the best of my abilities whilst trying to be as impartial as possible** - this did seem to go some *small* way in reducing some of the highest frequencies.  The sound of the box was still quite loud and bright, but it's as if the harshest tones were tempered just a little.  I really spent time with it, listening, getting the sense of how the box sounded/played over several days, then went back and removed the olovisc from within the chambers and tried again. 

I really wanted to see if the change I was hearing was there or if I had just convinced myself that it was.  I removed the olovisc and lined the back chamber wall with a thicker, cork gasket material in its place.  I figured if I exaggerated the variable in my experiment, any perceived difference might be more noticeable.  While the olovisc was quite thin (less than 1mm), the cork gasket was about double the thickness.  Here's where it gets tricky, because in adding this material I also added another variable to the equation - the overall depth of the chambers was reduced.  The result was a slightly more mellow sound and a slight reduction in volume, but it also had an undesirable effect on reed performance.  It's impossible for me to say whether or not this change is due to the sound-absorptive material lining the chamber, whether it's the slight reduction in chambers size, or both.  In the end, I removed any of the linings from within the reed chambers.

Ultimately, I'm not sure that I've proved or disproved much, however it does seem to suggest that the acoustic properties of the reed chambers *may* have a difference on tone.  It's worth noting, however, that I was unable to differentiate between the sound recordings I made with my iphone of the instrument throughout the process.  The only differences I could pick up were with how it felt/sounded as I was playing it.
Logged
C#/D player

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: Reed block materials . . . ?
« Reply #12 on: December 11, 2021, 09:39:26 PM »

Thank you all, that's really interesting and especially good to read of your experiments MSelic.
I guess I hadn't really expected a single, straightforward opinion!
I appreciate the need for rigidity, I have experienced the big differences that even the tiniest variations in reed block mounting, bracing etc can make, and I have a gut feeling that the instruments whose sound I generally prefer are those that are slightly larger - so with larger internal volume. Interestingly a lot of the instruments whose sound I like also use wooden fondos rather than aluminium - but then I have also been told by a French maker that he doesn't think the fondo material makes a big difference!

I'll be making some reed blocks over christmas, and current thinking is to make the soles of beech which seems to be pretty universal. I made my last set of sycamore with a walnut core and was very pleased with the sound, but in the interest of experimentation and learning will do something different this time . . . I do have some nice red cedar, and also some very slow grown and dense, close grained pinus sylvestris. Not sure . . . .
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Reed block materials . . . ?
« Reply #13 on: December 12, 2021, 09:33:46 AM »

even the metal struts that connect the reed block to increase stability seem to vary!  Commonly they are simply flat strips of metal but Frans VanderAa bends a thickish wire into a Z shape and swears that some variation of acoustic coupling improves the sound.

When I posted that here, opinion was that it made no difference whatsoever. :|glug
Logged
  _       _    _      _ 

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed block materials . . . ?
« Reply #14 on: December 12, 2021, 12:58:32 PM »

even the metal struts that connect the reed block to increase stability seem to vary!  Commonly they are simply flat strips of metal but Frans VanderAa bends a thickish wire into a Z shape and swears that some variation of acoustic coupling improves the sound.

When I posted that here, opinion was that it made no difference whatsoever. :|glug

“Improve” the sound how? I’m not sure I see how a semi-rigid brace would help.
Logged
C#/D player

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed block materials . . . ?
« Reply #15 on: December 12, 2021, 10:10:15 PM »

It's funny that this thread popped up today, given that I was about to start a similar thread sharing some of my experimentation in this area.  I'll share my experience here.

I recently did some experimentation with an accordion I had - a two-row, 3-voice (MMM) instrument with an aluminum fondo/soundboard and Voci Armoniche reeds (either TAM or A-Mano) - that had a *VERY* bright sound and was quite loud.  I wanted to see if there was anything I could do to temper or mellow out some of the highest frequencies that contributed to what I perceived as being a slightly harsh tone in places.  The first thing I did is play around with the grill; I took it off, put it back on, lined the grill with sound absorbing material, etc.  The tone of the instrument did not change at all.  At best I managed to muffle the overall sound, but even then the highest frequencies cut right through! 

Next was to look at the internals construction and design of the instrument.  I found that the entire insides - the casework, the reedblocks, the reed chambers, etc - were all heavily varnished and glossy.  It has been postulated on here before that a reflective surface within the reed chambers *might* contribute to a brighter sound, the theory being that there might be less sound absorption with a reflective surface, particularly the higher frequencies, than there might be with bare wood surfaces.  I decided to put the theory to the test and stripped the reeds off the blocks and proceeded to sand every surface down to bare wood - casework, blocks and the interior reed chambers.  I was quite diligent in doing as thorough a job as possible. When that was done, I waxed everything back in place, reassembled the instrument I found....absolutely no perceivable difference in tone or volume whatsoever!

While I wasn't particularly surprised, I have to admit that I did expect that there might have been a slight difference.  No matter - I decided to continue exploring the theory.  If the walls of the reed chambers were made of a more sound absorptive material, would it not affect the tone produced to some extent?  Without actually altering the blocks themselves any further (any changes that I had made at this point were entirely reversible if desired), I decided the easiest way to try this would be to line the back wall of the reed chambers with a thin layer of olovisc - the gasket material that is usually used for screwed-on reedplates.  Unconventional, I know, but keep in mind I was just exploring theories here.  I did this for a few of the notes in the middle of the keyboard only, which were the ones that had the harshest/shrillest tone.  As far as I could tell - **to the best of my abilities whilst trying to be as impartial as possible** - this did seem to go some *small* way in reducing some of the highest frequencies.  The sound of the box was still quite loud and bright, but it's as if the harshest tones were tempered just a little.  I really spent time with it, listening, getting the sense of how the box sounded/played over several days, then went back and removed the olovisc from within the chambers and tried again. 

I really wanted to see if the change I was hearing was there or if I had just convinced myself that it was.  I removed the olovisc and lined the back chamber wall with a thicker, cork gasket material in its place.  I figured if I exaggerated the variable in my experiment, any perceived difference might be more noticeable.  While the olovisc was quite thin (less than 1mm), the cork gasket was about double the thickness.  Here's where it gets tricky, because in adding this material I also added another variable to the equation - the overall depth of the chambers was reduced.  The result was a slightly more mellow sound and a slight reduction in volume, but it also had an undesirable effect on reed performance.  It's impossible for me to say whether or not this change is due to the sound-absorptive material lining the chamber, whether it's the slight reduction in chambers size, or both.  In the end, I removed any of the linings from within the reed chambers.

Ultimately, I'm not sure that I've proved or disproved much, however it does seem to suggest that the acoustic properties of the reed chambers *may* have a difference on tone.  It's worth noting, however, that I was unable to differentiate between the sound recordings I made with my iphone of the instrument throughout the process.  The only differences I could pick up were with how it felt/sounded as I was playing it.

If you look at the acoustic properties of materials, any wood -- varnished or not -- absorbs very little sound compared to *anything* soft like felt or olovisc or cork. If you have any closed reverberant cavity with reasonably hard and rigid walls -- like a room -- adding anything absorptive that covers a significant amount of the area can make a big difference, it's why acoustic tiles are uses to improve room acoustics.

However reed blocks (or the cavities inside them) are not closed and most of the sound from the reed passes straight out of them, so you'd expect the material or surface finish to have even less effect, which is what mselic found.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed block materials . . . ?
« Reply #16 on: December 12, 2021, 11:48:47 PM »

Not strictly 'on topic' but here goes anyway!

"reed blocks (or the cavities inside them) are not closed and most of the sound from the reed passes straight out of them"

So to quieten an instrument, would applying a slightly longer bead of glue to the reed valves, thus restricting the amount of valve opening and amount of air travelling through the block cavity, be a possible method?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed block materials . . . ?
« Reply #17 on: December 13, 2021, 02:40:11 AM »

Quote
So to quieten an instrument, would applying a slightly longer bead of glue to the reed valves, thus restricting the amount of valve opening and amount of air travelling through the block cavity, be a possible method?

I suspect that a reduced valve opening would also have an undesirable effect on reed response/performance.
Logged
C#/D player

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Reed block materials . . . ?
« Reply #18 on: December 14, 2021, 10:43:14 AM »

A few years ago I attended a melodeon-fettling workshop with the Bernard Loffet.  He was very insistent that when removing reed blocks the retaining screws should turned a precise number of times, and on re-fitting them tightened by exactly the same amount, to maintain the same pressure.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Reed block materials . . . ?
« Reply #19 on: December 14, 2021, 01:54:53 PM »

Colin Dipper told me to remove and put back the screws in my Wheatstone Linota in a 1,3,5,2,4,6 Rotation. And to tighten them to similar torque, as judged by my wrist. Same concept?
Logged
  _       _    _      _ 
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal