Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Old reeds breaking  (Read 975 times)

0 Members and 1 Guest are viewing this topic.

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Old reeds breaking
« on: December 12, 2021, 10:18:41 PM »

Anyone else have problems with box reeds breaking?
 
Had one break before, but not 3 in one box. Old paolo box reeds, the box i made that some of you have seen earlier. All breaking halfwayish. Maybe its chance but i hope it will return to normal. 70 year old reeds. Any advice? Two broken at the middle and one at the top. One of the middles in photo, top one i need to replace before taking to the session. Anyone test the before putting in?

Gavin.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old reeds breaking
« Reply #1 on: December 12, 2021, 10:25:05 PM »

It happens sometimes. Just replace the reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Old reeds breaking
« Reply #2 on: December 19, 2021, 10:19:07 PM »

This has more to do with how loud you play, not with age. One you push the reeds past a certain point you get up against the elastic limit and you start getting stress cracking.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Old reeds breaking
« Reply #3 on: December 20, 2021, 09:59:12 AM »

Both of mine which snapped … were when playing extra loud for Morris, during my first 10 years on melodeon.

I’m now 35 years along my journey, with no further incident.
Logged
  _       _    _      _ 

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Old reeds breaking
« Reply #4 on: December 28, 2021, 11:26:00 AM »

I have had 5 reeds break now in this box, had another 2 go in the last week. Thank Kimric for the suggestion of why, I am definitely pushing it too hard, but would not expect that sort of breakage rate and not had it before.  Will replace the last 2, if any more go I will replace the reeds with a set from a different box.
Logged

Brian Wyneken

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Re: Old reeds breaking
« Reply #5 on: December 28, 2021, 04:07:08 PM »

How would one go about finding a single reed to replace? I've seen forum posts on changing out sets of reeds or obtaining a new block of reeds (and I sometimes see blocks posted on ebay - usually Hohner blocks), but I don't think I've seen guidance on how to obtain a matching reed for an otherwise healthy melodeon. Would any competent fettler/accordion repair shop be able to satisfactorily fix a box with a single damaged reed?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Old reeds breaking
« Reply #6 on: December 28, 2021, 04:15:38 PM »

How would one go about finding a single reed to replace? I've seen forum posts on changing out sets of reeds or obtaining a new block of reeds (and I sometimes see blocks posted on ebay - usually Hohner blocks), but I don't think I've seen guidance on how to obtain a matching reed for an otherwise healthy melodeon. Would any competent fettler/accordion repair shop be able to satisfactorily fix a box with a single damaged reed?
I like most other fettlers have a large collection of old reeds sourced from beyond repair boxes, off eBay etc so can replace most any reed plate on a Hohner (my specialist subject). For other boxes with Italian machina reeds (Sandpipers etc) I use Charlie Marshall's Cagnoni reeds, For higher quality reeds I pass on the work to other fettlers as I don't want the pain of trying to source such reeds.

Brian Wyneken

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Re: Old reeds breaking
« Reply #7 on: December 28, 2021, 04:24:43 PM »

How would one go about finding a single reed to replace? I've seen forum posts on changing out sets of reeds or obtaining a new block of reeds (and I sometimes see blocks posted on ebay - usually Hohner blocks), but I don't think I've seen guidance on how to obtain a matching reed for an otherwise healthy melodeon. Would any competent fettler/accordion repair shop be able to satisfactorily fix a box with a single damaged reed?
I like most other fettlers have a large collection of old reeds sourced from beyond repair boxes, off eBay etc so can replace most any reed plate on a Hohner (my specialist subject). For other boxes with Italian machina reeds (Sandpipers etc) I use Charlie Marshall's Cagnoni reeds, For higher quality reeds I pass on the work to other fettlers as I don't want the pain of trying to source such reeds.

Thank you Lester!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Old reeds breaking
« Reply #8 on: December 28, 2021, 04:50:40 PM »

... but I don't think I've seen guidance on how to obtain a matching reed for an otherwise healthy melodeon. Would any competent fettler/accordion repair shop be able to satisfactorily fix a box with a single damaged reed?

If you have a repair person in mind ask them what type of reed they would use if you wanted them to do the work. If they say it doesn't matter then go elsewhere.  If you want a reed for an old Paolo Soprani, like the OP was asking about, then the exact same reeds are no longer made and you have to look for a reed from an instrument from the same era and a similar maker.  Sometimes you can get a piano box and alter the pitches to suit.  Some repairers, especially in Ireland) will have a selection of old reeds from Paolo Sopraini diatonics.  If you can't get an exact match then fitting a higher grade of reed than the original is preferable to fitting a lower grade.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Old reeds breaking
« Reply #9 on: December 28, 2021, 05:07:10 PM »

I have had 5 reeds break now in this box, had another 2 go in the last week. Thank Kimric for the suggestion of why, I am definitely pushing it too hard, but would not expect that sort of breakage rate and not had it before.  Will replace the last 2, if any more go I will replace the reeds with a set from a different box.

I don't know if you play like this, but I wince sometimes seeing people playing loudly (e.g. for Morris outdoors) by "punching" the bellows to get "attack" on the notes -- not only knackers the bellows but also breaks reeds because the pallets open when the air pressure is high and the reeds are bent down into the frames, which often also causes the pitch to drop. You get more volume and longer reed/bellows life by opening the pallets first (slightly early) and then <squeezing> the bellows to get a loud note.

The other cause might be if the reeds were tuned in the past by filing across the width and this has left scratches across the reeds, these act as stress concentrators and the reeds snap more easily. You should be able to see this by looking at the reeds. If this has been done than the only fix is to polish out the scratches and retune the reeds, but if they're deep this means taking a lot of metal off.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Brian Wyneken

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Re: Old reeds breaking
« Reply #10 on: December 28, 2021, 05:24:32 PM »

... but I don't think I've seen guidance on how to obtain a matching reed for an otherwise healthy melodeon. Would any competent fettler/accordion repair shop be able to satisfactorily fix a box with a single damaged reed?

If you have a repair person in mind ask them what type of reed they would use if you wanted them to do the work. If they say it doesn't matter then go elsewhere.  If you want a reed for an old Paolo Soprani, like the OP was asking about, then the exact same reeds are no longer made and you have to look for a reed from an instrument from the same era and a similar maker.  Sometimes you can get a piano box and alter the pitches to suit.  Some repairers, especially in Ireland) will have a selection of old reeds from Paolo Sopraini diatonics.  If you can't get an exact match then fitting a higher grade of reed than the original is preferable to fitting a lower grade.

Thanks Theo - comparatively it seems kind of slim pickings in the US for parts - good advice on screening the repair shops!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal