Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pokerwork reed blocks  (Read 1435 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Pokerwork reed blocks
« on: December 14, 2021, 06:48:20 PM »

I have a couple of old boxes that might be described as pre-pokerwork models, celluloid covered but otherwise very like a pokerwork (one has ‘staggered’ basses like stradella), both are tuned in C/F. I’d quite like an A/D tuned box and I’m tempted to buy a new set of blocks from Charlie Marshall but I’m not really sure if they would be a proper fit ‘as is’. I’m reluctant to buy new blocks and then mess them about to get them to fit into an old box so I wondered if anyone has already done this and could offer a little advice?


I’ve also thought about putting a wanted ad in the Buy and Sell forum for a set of older A/D blocks and reeds but one thing at a time eh?
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Pokerwork reed blocks
« Reply #1 on: December 14, 2021, 06:53:13 PM »

First thing to ascertain is if the gasket is fitted to the blocks (felt on old blocks) or to the soundboard/fondo (newer models with olovisc). New blocks on old fondos needs some gasket fitting, olovisc from Charlie Marshall, not difficult but tedious.


Apart from that it's just usually a matter of adjusting the heights of the two place the block meets the casework, not at all difficult.
« Last Edit: December 14, 2021, 06:57:13 PM by Lester »
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Pokerwork reed blocks
« Reply #2 on: December 14, 2021, 07:09:13 PM »

Thanks Lester, that’s just the kind of info I was after! I can live with adjustments of block height if it’s just the thickness of a gasket one way or the other. Block sole height too low is also easy to deal with. What I didn’t want to encounter was carving huge lumps off the new blocks because the ends were too thick or the nightmare of finding that the width or taper of the sole plate was significantly different.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork reed blocks
« Reply #3 on: December 14, 2021, 07:18:36 PM »

Clamping arrangements are different too,  but the changes you have to make are usually small.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Pokerwork reed blocks
« Reply #4 on: December 14, 2021, 08:04:26 PM »

It is not overly difficult to cut felt gaskets if you want to for the fondo or reed block.  Put the bare faced block on a photocopier and copy the image.  Use a 'craft' light hold spray adhesive to fix the paper image over a piece of suitable felt - the Wool felt Co on line sell 'poly blend' for a few pennies per sheet.  You can then use masking tape to fix paper and felt to a piece of heavier gsm paper or card as a backing to stop it deforming.  You then 'punch' the holes as per the photocopied image and they will be a perfect fit.  I don't dislike the Olosvic but it's a cheaper fix via the felt and arguably ( a bit ) better in terms of air retention
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork reed blocks
« Reply #5 on: December 14, 2021, 09:17:48 PM »

It is not overly difficult to cut felt gaskets if you want to for the fondo or reed block.  Put the bare faced block on a photocopier and copy the image.  Use a 'craft' light hold spray adhesive to fix the paper image over a piece of suitable felt - the Wool felt Co on line sell 'poly blend' for a few pennies per sheet.  You can then use masking tape to fix paper and felt to a piece of heavier gsm paper or card as a backing to stop it deforming.  You then 'punch' the holes as per the photocopied image and they will be a perfect fit.  I don't dislike the Olosvic but it's a cheaper fix via the felt and arguably ( a bit ) better in terms of air retention

Oh that is making it hard work.

Just glue the gasket material to the base of the block, then use a scalpel with a new blade to cut out the holes, using the wood to guide the knife.  Takes about 15 minutes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Pokerwork reed blocks
« Reply #6 on: December 14, 2021, 09:53:54 PM »

I'd certainly second Theo's method, I've done that quite a few times now. Overthinking jobs often leads to more work than is strictly necessary.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Pokerwork reed blocks
« Reply #7 on: December 14, 2021, 10:15:05 PM »

I agree with Theo and Winston. A sharp scalpel blade  is the answer. All the precision is in cutting the timber base, the felt is the easy bit.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Pokerwork reed blocks
« Reply #8 on: December 14, 2021, 11:40:05 PM »

What can I say, I am a traditionalist with too much time on my hands  ;)  ::) It is very satisfying making the gaskets and cutting felt neatly with a (craft) knife hasn't worked for me around tight corners / circles.  It really is very easy - takes two minutes to set up - and not many more to do.  It replicates the original perfectly, hence not minding going to the trouble for the sake of originality.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Pokerwork reed blocks
« Reply #9 on: December 15, 2021, 08:19:40 AM »

"It replicates the original perfectly, hence not minding going to the trouble for the sake of originality."

All things considered, it's just a gasket.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Pokerwork reed blocks
« Reply #10 on: December 15, 2021, 08:37:21 AM »

Make sure that the holes in the new reed block-base have the same offset as those of the fondo. I've come across several older boxes where this was not the case.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Pokerwork reed blocks
« Reply #11 on: December 21, 2021, 11:22:33 AM »

Having considered all of this carefully I’ve decided to open up the boxes to compare the blocks with each other then photocopy the bottom of the blocks, both sets if they differ, then send the copies up to Charlie to see how close they are to the new ones. Does that sound sensible?
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Pokerwork reed blocks
« Reply #12 on: December 21, 2021, 11:54:04 AM »

Why not use the existing reeds and retune to A/D?
I haven't looked at how much retuning is needed but it would keep you off the streets for a while.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Pokerwork reed blocks
« Reply #13 on: December 21, 2021, 05:40:26 PM »

I'd prefer to keep the existing C/F blocks as they are, the two boxes sound entirely different to each other (one is Dedic tuned although it needs tweaking here and there) and both sound pretty good. I've had them apart this afternoon and although the bodies are slightly different in both size and shape, the blocks are indeed interchangeable. Whilst rooting around my bits and pieces cupboard I happened upon a box that I'm part way through renovating but I had to shelve for a while a year or two ago and didn't manage to get back to. With that box was a full set of blocks I'd harvested the reeds from and these are a match for the blocks in the other boxes!

Now I'm looking for an old set of Hohner A/D reeds to populate them with, I guess it's time to place an ad in the Buy and Sell forum.
;D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Pokerwork reed blocks
« Reply #14 on: December 22, 2021, 08:51:17 AM »

Oh that is making it hard work.

Just glue the gasket material to the base of the block, then use a scalpel with a new blade to cut out the holes, using the wood to guide the knife.  Takes about 15 minutes.

Yep - I do that too. Seemed obvious tp me so I never really considered any other way of doing it......
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal