Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: HA114 woes  (Read 3339 times)

0 Members and 1 Guest are viewing this topic.

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: HA114 woes
« Reply #20 on: December 18, 2021, 09:53:00 AM »

A pair of round nose pliers are good for occasional spring coiling.

And if you are making a set, then Jewellers looping pliers are designed specifically for making small coils in wire without marking it.  Available either tapered or with calibrated noses to make exactly repeatable diameter coils.
Logged

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: HA114 woes
« Reply #21 on: December 20, 2021, 05:38:24 PM »

Lots of fettlers in the US - The Button Box is the first that comes to mind and they can certainly overhaul that instrument for you. No need for shipping outside the country.

Last I heard, the Button Box was closing shop soon. But you are right, there are a few fettlers in the US. Not that shipping within the country is much more inexpensive.

Scott Bellinger (Hickorywind) is not far from you, in Rochester, NY. See link here: http://forum.melodeon.net/index.php/page,shops_repairers.html

Yes, I know Scott, I've bought several melodeons from him. Though last time we talked about 4-stops, he told me they were so annoying to work on he didn't plan on buying any more to restore. So I kind of figured that means I would get the "I don't really want to do this" price quoted to me! But maybe not, I'll probably send him an email.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: HA114 woes
« Reply #22 on: December 20, 2021, 05:53:56 PM »

While The Button Box business is for sale (including the concertina-making business), they are still very much in business and aren’t closing down soon. As I understand it, Doug’s intention is to keep going until he is able to find a suitable candidate to take over. I suppose at some point if it doesn’t sell he may close down, but they’re not at that point yet.

I’ve overhauled many HA114s. I don’t find them a pain to work on at all. In fact, in some ways they are even easier to work on than others boxes given that you have stops to isolate the voices while tuning. The challenging bit is waxing between blocks, but it’s really not that big of a deal once you’ve come up with a system for doing it.
Logged
C#/D player

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: HA114 woes
« Reply #23 on: December 20, 2021, 08:27:49 PM »

. The challenging bit is waxing between blocks, but it’s really not that big of a deal once you’ve come up with a system for doing it.
[/quote]

i did another today. cant help thinking there is a system better than mine. Please elucidate.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: HA114 woes
« Reply #24 on: December 20, 2021, 08:36:09 PM »

My method which works but maybe thought odd:


Taking the reed plates one by one I run a bead of wax along the bottom edge of the reed plate and then slide it into position whilst the wax is still soft and then wax the top of the reed to hold the plate in position.
Repeat until all reed plates on the block are in place then run wax down the gap between the plates using gravity.
I do this using a soldering iron.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: HA114 woes
« Reply #25 on: December 20, 2021, 09:26:47 PM »

I'm slowly coming to terms with my 114's, but haven't yet done a whole row at once.
My method is a bit like Mr Bailey's, but only having a reedplate or two out at a time, I roll a piece of wax in my fingers, place it at the bottom and then soften it with my long ended modified iron before dropping the plate into position, then wax along the top and down the sides. It's worked so far, but isn't very tidy as yet!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: HA114 woes
« Reply #26 on: December 21, 2021, 03:43:42 AM »

I’ve worked on a good few as well. Takes a different approach to wax but certainly nothing to warrant avoiding them.
Logged
Too many accordions, help!

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: HA114 woes
« Reply #27 on: December 21, 2021, 06:01:47 PM »


Yes, I know Scott, I've bought several melodeons from him. Though last time we talked about 4-stops, he told me they were so annoying to work on he didn't plan on buying any more to restore. So I kind of figured that means I would get the "I don't really want to do this" price quoted to me! But maybe not, I'll probably send him an email.

Good memory Jesse. My opinion hasn't changed. They are fun to play and sound nice but I hope to never open another one up myself. Not only is the waxing challenging, the tuning and reed gap setting are also difficult in situ. Please send your box to one of these other fine fettlers that don't mind working on them:)

Scott
Logged
too many boxes...please buy one, or two, or

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: HA114 woes
« Reply #28 on: December 22, 2021, 12:43:30 AM »

Quote
i did another today. cant help thinking there is a system better than mine. Please elucidate.

One option is to use a long-reach or modified soldering iron tip, but while I do use soldering irons (with custom made/modified tips) as my standard approach for waxing, I will sometimes melt a small amount of wax in a tin can and use a paintbrush to get in those hard-to-reach spots on a HA114. You have to take your time but the results have always been tidy and effective.  I imagine someone skilled at using a waxing spoon could do a decent job without much trouble, although they might have to adjust their technique a little.
« Last Edit: December 22, 2021, 01:42:21 PM by mselic »
Logged
C#/D player

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: HA114 woes
« Reply #29 on: December 22, 2021, 01:30:32 PM »

I don't wax that often as I like to gasket but in the past I have used a thin tip soldering iron which works well.  You can get sets of tips for small irons in different configurations.  The narrow chisel type fits really well into the gap. I make little "rods" of wax and run it down the gap from the top under gravity and then wipe the gap with the iron just to make sure.

Here is the tip type :
Key Equipment by John Burks, on Flickr

Picture also includes my most important bit of equipment .0015 feeler guage.  Used for reed clearances  (:)
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: HA114 woes
« Reply #30 on: December 22, 2021, 05:41:57 PM »

I think Hohner were just being lazy bums when they designed the 114. They glued two standard reed blocks side by side, instead of the more helpful one block in the centre and the other two sets of reeds laid flat on either side. Naughty Hohner.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HA114 woes
« Reply #31 on: December 22, 2021, 05:52:06 PM »

I think Hohner were just being lazy bums when they designed the 114. They glued two standard reed blocks side by side, instead of the more helpful one block in the centre and the other two sets of reeds laid flat on either side. Naughty Hohner.

Not that simple I think.  Two upright blocks take up less space, and glued in blocks don't need space for clamps to hold the blocks.  The result?  The 114 is  more compact and lighter than any other 1 row 4 stop I can think of.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: HA114 woes
« Reply #32 on: December 22, 2021, 06:54:00 PM »

I’m sure you are right Theo…although the glued in blocks don’t actually have clamps, but I take your point.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: HA114 woes
« Reply #33 on: December 22, 2021, 07:01:32 PM »


although the glued in blocks don’t actually have clamps, but I take your point.
Fairly sure that's what Theo said 'glued in blocks don't need space for clamps'

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: HA114 woes
« Reply #34 on: December 22, 2021, 08:00:27 PM »

That’s a 'duh' for me. It’s the beer you know.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: HA114 woes
« Reply #35 on: December 23, 2021, 12:10:34 AM »

I think I remember the HA113 boxes being even a little bit more confined.
If I recall correctly, the low octave set faces inwards and at a slightly less favourable angle for access.
Still not a problem to the fettlers on here though I’m sure.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal