Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: making reedblocks for 4 stop cajun box  (Read 2219 times)

0 Members and 1 Guest are viewing this topic.

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
making reedblocks for 4 stop cajun box
« on: December 24, 2021, 04:18:19 PM »

I'm about to embark on the process of making reedblocks for a one row cajun box (got the bass end /fingerboard made and just about everything else figured out) my question is about reedblock chambers...i can see that the width and length is determined by the dimensions of the reed, with a constant width and the length determined by length of reed. But how do folks calculate the depth of the chamber and the angle of the taper. Bigger reeds i figure need a deeper chamber so the reed has room to vibrate but this leaves some questions. I took apart a Charlie Ortego "master" cajun box. His chambers have no taper and no variation in depth. A Marc Savoy (and every other one i checked.......martin, hohner, french martin, etc) has blocks that are set on an angle (deeper chamber at rivet end of reed compared to opposite end) and has chambers that get shallower the higher up the scale you go. Anybody know the science of why? My ortego sounded great and responded really well (prior to taking out the reeds) so maybe it all makes no difference?. A little quieter than the savoy but other than that it played great and the volume may just be that he used dural reeds. Ive looked inside my old Dienst "International" one row and the chambers pretty much follow the Savoy concept albeit not so deep, but im guessing that is because the old reeds didnt "travel" as far as more modern Italian Bincis when vibrating. Assuming the depth of the chamber and the taper has some effect does anyone know what is affected ? volume? tone? initial responsiveness of reed? consistency of bellows pressure as one moves up and down the scale? Even response across all four LMMH reeds when playing ....? something else i've not considered? To make things more confusing each maker i've checked uses a different taper and a different chamber depth. I can just take a rough guess but id be interested to know if anybody can explain why the chambers vary in depth and angle and if there is a formula to follow? Plan A is to make the reed blocks with the help of the maxicam cnc router machine in my local makerspace and Cut 2D Pro so, in theory, setting up all the variables shouldn't be too much of an issue with the help of the guys who run the space. Anyone got any measurements or know the science of it all?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: making reedblocks for 4 stop cajun box
« Reply #1 on: December 24, 2021, 05:11:03 PM »

I don’t think there is any “science” for this in terms of calculating chamber volume from note frequency.

As you’ve already surmised you need enough depth for the reed to swing freely at maximum volume.  The other constraint that I’m aware of is that the highest reeds respond a little more quickly and louder with less chamber volume.  As for as I can tell it’s very much a trial and error process based on those principles.  Highest reeds also may be happier when reversed so that the reed tongues point down, and with a wedge filling about half of the chamber volume.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

bellowpin

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 119
Re: making reedblocks for 4 stop cajun box
« Reply #2 on: December 24, 2021, 05:51:55 PM »

 hi chris, you raise some interesting questions . i have not practical experience making reed blocks, but have considered some of the factors as a thought exercise .
  i think that designs have been worked out by trial and error,over the decades .with a bit of copy'ing of others work as well . if i may offer pointers on two areas .
  the hole through the "fondo" is a guide to the area needed for air flow .12-13mm typical.in comparison the chamber is wider,so can be shallow in depth,and still have the same cross-section .
     the swing of reed tip needs clearance,so as not to hit back of the chamber. the reed inside the chamber swings deeper than the one on the outside. allow for the thickness of the reed plate . the bigger the reeds the more swing .  with these limits in mind ,it probably makes sense to gradually slope the back of the chamber from these two extremes.
  just my thoughts . brian n..
Logged
whole life in the shropshire hills. on the slow track and enjoying it.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: making reedblocks for 4 stop cajun box
« Reply #3 on: December 24, 2021, 06:08:17 PM »

I thought the angled blocks were to give easier access for tuning.
Otherwise I can't see why the bass blocks in some of the small Hohners have parallel chambers, but canted over.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: making reedblocks for 4 stop cajun box
« Reply #4 on: December 24, 2021, 06:19:01 PM »

Chris , I have no science but did recently build a box / reed block, I took my numbers from the plan ( Falcon) that was on yahoo. Pretty close to my Beltuna in comparison.
For reference my bass chord block was 9mm or 3/8”
the biggest bass reed was on 19mm or 3/4” the other two sitting on around 1/2” or 12mm. The treble end MM banks went from 9mm down two 6mm pretty much straight across ( no taper in the other direction ) and the H bank was very similar maybe slightly less depth. The L bank was around 11mm / 7/16”? @ the big reed end and taper down to about 7mm
And the only difference is the standing block is tapered, I tapered the filler piece between the two, so the reeds are tilted back, I think I may have tapered the standing blocks slightly but it was factional at the reed tip.
My reeds all worked straight away without flipping and or filling the chambers.
This is all from what I remember, I don’t have the numbers in front of me.
I will see if I can find the plan if you think that would help.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: making reedblocks for 4 stop cajun box
« Reply #5 on: December 24, 2021, 09:01:22 PM »


I will see if I can find the plan if you think that would help.
[/quote]

yes that would be great to see
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: making reedblocks for 4 stop cajun box
« Reply #6 on: December 24, 2021, 09:10:41 PM »


  the hole through the "fondo" is a guide to the area needed for air flow .12-13mm typical.in comparison the chamber is wider,so can be shallow in depth,and still have the same cross-section .

well there's another thing.....i spoke with rees wesson who tells me a square hole through the fondo /slider/reed pan is better than a round hole as it allows more airflow and results in more volume, which i can understand. But both my charlie ortego "master" and my dienst "international" have square holes in the sliders and reed plan but round holes in the fondo....since it seems the round hole determines airflow why not just use round hole on all 3? another thing to keep me awake at night LOL


     the swing of reed tip needs clearance,so as not to hit back of the chamber. the reed inside the chamber swings deeper than the one on the outside. allow for the thickness of the reed plate . the bigger the reeds the more swing .  with these limits in mind ,it probably makes sense to gradually slope the back of the chamber from these two extremes.

ah good point thanks..but the back of the chamber actually slopes the other way unless im misunderstanding...the deeper part of the chamber is at the rivet end...the swing is at the shallower end.....more whisky needed if im to sleep tonight haha

[/quote]
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: making reedblocks for 4 stop cajun box
« Reply #7 on: December 24, 2021, 09:26:05 PM »

 The other constraint that I’m aware of is that the highest reeds respond a little more quickly and louder with less chamber volume.  As for as I can tell it’s very much a trial and error process based on those principles.  Highest reeds also may be happier when reversed so that the reed tongues point down, and with a wedge filling about half of the chamber volume.
[/quote]

thanks theo...yes im seeing wedges for small reeds in lots of makes and small holes through the wax and reed reversals...when restoring and rewaxing i usually go with whatever has been used on the basis of if it aint broke dont fix it. Im currently working on a baffetti that has the wedge across the whole of chamber and a hohner which has the wedge across half of the chamber. others have no wedges and sound great. but yes i guess less chamber volume on smaller reeds might provide more compression somehow and therefore create more volume which provides better balance as small reeds have less volume (even though one could imagine or assume a larger chamber might create more volume like a larger guitar body) are we also touching here on not just chamber volume but also chamber shape which gets us into aerodynamics and airflow...aghhhhh oh no!! I live in Derby so maybe i need to talk to the folks at Rolls Royce! LOL
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: making reedblocks for 4 stop cajun box
« Reply #8 on: December 24, 2021, 11:00:07 PM »

The purpose of the small hole in the wax on high reeds is to reduce the pressure difference across the reed in order to avoid the reed choking.  The absence of valves on small reeds serves a similar purposes in allowing a bleed of air through the non playing reed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: making reedblocks for 4 stop cajun box
« Reply #9 on: December 24, 2021, 11:24:35 PM »

My reed chambers are all 10mm depth.
The highest 3 reeds on the two M banks have wedges and no valves.
The highest 5 reeds on the H bank have wedges and no valves.
There are no wedges on the L bank.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: making reedblocks for 4 stop cajun box
« Reply #10 on: December 25, 2021, 05:49:02 PM »

My reed chambers are all 10mm depth.
The highest 3 reeds on the two M banks have wedges and no valves.
The highest 5 reeds on the H bank have wedges and no valves.
There are no wedges on the L bank.
Mine were 9.5mm ish so close to yours and with the tapered set up I did you end up closing off some of the hole in the fondo with the divider at the high reed end which of course the divider piece can be cut away to open the air way ( which is what I had to do).
with your method of using fillers you can customize the pieces to avoid having to chisel away the wood on the standing block divider. So probably end results are equally good, I think Marc Savoy angles his blocks from the photos I seen and thats what my Falcon plan called for so I went that way.
« Last Edit: December 25, 2021, 05:50:54 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: making reedblocks for 4 stop cajun box
« Reply #11 on: December 28, 2021, 02:48:50 PM »

here's some drawings , break out the conversion chart (:)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: making reedblocks for 4 stop cajun box
« Reply #12 on: December 28, 2021, 07:54:03 PM »

wow boxcall thats a big help! big thanks. do you have a link to the yahoo group?
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: making reedblocks for 4 stop cajun box
« Reply #13 on: December 28, 2021, 11:14:03 PM »

wow boxcall thats a big help! big thanks. do you have a link to the yahoo group?
It’s no longer there, I believe, I haven’t the link either. It was boxbuilder group.
I have the rest of the drawings I downloaded ( not sure if complete but close), I just posted the reed blocks pertaining to the thread , if you want more?, we can talk  ;) JK, just let me know I could Pm you or if Theo / Clive thinks it is ok? , I’ll post them here for all to see (:)
I’m not sure if there are any issues with that?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: making reedblocks for 4 stop cajun box
« Reply #14 on: December 28, 2021, 11:21:42 PM »

Those dimensions may not work. I always measure the length of the reedplates and build the blocks to fit.
There are many variations in dimensions between manufacturers and sometimes from one manufacturer.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: making reedblocks for 4 stop cajun box
« Reply #15 on: December 29, 2021, 12:20:58 AM »

Those dimensions may not work. I always measure the length of the reedplates and build the blocks to fit.
There are many variations in dimensions between manufacturers and sometimes from one manufacturer.
I also did my blocks to the height of the reeds I was using and built them to fit , I think the other dimensions are good as a reference, I also used my Beltuna as a reference when building mine.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: making reedblocks for 4 stop cajun box
« Reply #16 on: January 04, 2022, 09:00:36 AM »

Depths of the chambers on the blocks I constructed match Rees’ measurements, wedges included. The tapering/angling of the reedblocks to my knowledge is to tilt the reed away from any adjacent reeds so they don’t interfere with each other when playing. Build your blocks to suit the size and shape of the reeds you plan to use.
Logged
Too many accordions, help!

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: making reedblocks for 4 stop cajun box
« Reply #17 on: May 06, 2022, 01:56:50 PM »

progress on reedblocks. getting there. hopefully ive attached a pic.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: making reedblocks for 4 stop cajun box
« Reply #18 on: May 06, 2022, 02:12:49 PM »

Looking mighty fine there Chris.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal