Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner HA 114 in G overhaul  (Read 1991 times)

0 Members and 1 Guest are viewing this topic.

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Hohner HA 114 in G overhaul
« on: January 22, 2022, 03:49:17 PM »

Hello,

This is my first post on the forum.

I've had the Hohner for a few years now, and have managed to play it, but it leaks badly. I've got a new 4 stopper now, so I can have ago at improving the Hohner.

Most of the leakage seems to be through the stops. Does anyone have an idea how to seal the leakage from this area? Should I be sealing the rod itself, or be looking at the slider mechanism under the treble blocks (which are glued in place).

I've attached a couple of photos, and I'll try and put more up. I'm guessing the pallets should have new felt and leather. I'd also like to install a button travel limiter, and tune the low D to an E.

Many thanks

Lewis
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Hohner HA 114 in G overhaul
« Reply #1 on: January 22, 2022, 05:20:25 PM »

Are you sure the air is leaking from the stops and not from the bellows gasket next to them?  I've owned and worked on many HA114s and have never come across air leaking from the stops.  From your photo they look pretty snug and I'd be surprised if they were actually leaking from there.  Leaking from the bellows gasket is much more common.

The leather/felt on the pallets is original.  It's possible you may have air leakage there as well.
Logged
C#/D player

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner HA 114 in G overhaul
« Reply #2 on: January 22, 2022, 05:38:46 PM »

Yes I think so, even though it appears snug in the photo - I opened all the stops and pressed blu tack around the metal rods, sealing the holes, and that cured 80-90% of the leakage. There may well be a little leakage through the gasket, and the pallets do have contact, but the contact feels weak to me, compared to newer Italian boxes. There's definitely some lateral play in the stops, and it only takes a small hole to lose a lot of air - seems to be an unusual problem though...
Logged

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner HA 114 in G overhaul
« Reply #3 on: January 22, 2022, 06:34:53 PM »

On closer inspection, the 2nd aluminium slider is loose, causing the stops 1 and 2 from the front to drop. There are score marks on the metal rod of stop 2, presumably added for friction to keep the stop up. However this has caused the hole to enlarge over time, and is likely to be the main source of the leak. So it looks like a previous repair has caused the problem. I'm thinking seal the hole with a very strong filler and then redrill it... Or maybe a larger hole with a felt lining...

Not sure how to get some friction on the slider though... I guess the reeds could be losing air along the slider as well.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner HA 114 in G overhaul
« Reply #4 on: January 22, 2022, 08:51:28 PM »

Small magnets can help keep the stops from closing on their own, see this thread: http://forum.melodeon.net/index.php/topic,25303.msg304824.html#msg304824
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HA 114 in G overhaul
« Reply #5 on: January 22, 2022, 09:02:39 PM »

If you find / think it is coming from the stop rod or enlarged hole, you could try a drop of wax in the hole as a temporary fix and or to verify if that is the main source of air lose.
I’ve heard it mentioned on this site as a cure for loose stops but I’ve never tried it, so maybe wait for confirmation from others.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner HA 114 in G overhaul
« Reply #6 on: January 22, 2022, 09:20:08 PM »

I seem to remember Steve Freereeder advocating putting superglue down bellows pin holes before putting in the pins. This would purportedly seal the leak and then the sideways movement of pulling out the pin would easily break the grip of the glue and leave the newly sized hole intact.
I've never been brave enough to try it myself, but in theory it sounds fine, and surely would work the same with stop knobs.
Although I'd be very wary of attempting it, I know that Steve (being who he was) wouldn't recommend something that he hadn't had success with himself.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HA 114 in G overhaul
« Reply #7 on: January 22, 2022, 09:49:32 PM »

I think steve got the superglue truck from me.  It’s certainly something I’ve done many times.  The metal surface needs to be very smooth, even polished.  I’ve only ever tried it with new and unused bellows pins.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner HA 114 in G overhaul
« Reply #8 on: January 23, 2022, 09:47:02 AM »

Magnets would be a step up from clothes pegs. I assume the stops are supposed to be held up by the friction of the aluminium plates against what looks like beech timber at the base of the reed blocks. I'm guessing I'd have to remove the reed blocks and pack out that section to properly fix this problem. Has anyone tried removing them? I'm wondering if they would come away with a heated palette knife. Not sure what type of glue it is though.

Interesting idea about the super glue...

I think I'll try the wax idea - it's the offset middle reed that has the problematic stop. I tend to avoid using it as its tuned pretty wide, and I seem to prefer the LMH combination.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HA 114 in G overhaul
« Reply #9 on: January 23, 2022, 10:15:13 AM »

Don't try to remove the reed blocks, they are glued in.  The channel for the register slide is made up of some very thin layers of wood glued together.  Taking the blocks out will very likely make things worse.

The slides are normally a loose sliding fit, any original friction is from the place where the stop shafts pass through the top of the box.

If you make sure the pallets and the bellows gaskets are completely airtight the box should be quite playable.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner HA 114 in G overhaul
« Reply #10 on: January 23, 2022, 11:18:32 AM »

Thanks Theo - I'll avoid the reeds blocks and work on the stops.

One other curiosity is the bassoon reeds don't seem to have a low B and low D - so that button ends up being MMMH. I've attached a photo of them...
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner HA 114 in G overhaul
« Reply #11 on: January 23, 2022, 02:44:20 PM »

Thanks Theo - I'll avoid the reeds blocks and work on the stops.

One other curiosity is the bassoon reeds don't seem to have a low B and low D - so that button ends up being MMMH. I've attached a photo of them...

This is common in all HA114 boxes pitched in G. I think the bassoon reed was too low to be heard so they substituted with one an octave higher.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Hohner HA 114 in G overhaul
« Reply #12 on: January 23, 2022, 04:55:23 PM »

Might be too big a reed for the block as well?
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Hohner HA 114 in G overhaul
« Reply #13 on: January 23, 2022, 06:49:14 PM »

button travel limiting you asked about.......ive not found a way of doing this on a 114. My solution was to build a new wooden fingerboard with removeable back so you can then use felt on the back. My plan is to offer them for sale (got several ready) once i get my new website up and running.
Logged

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner HA 114 in G overhaul
« Reply #14 on: January 23, 2022, 08:25:19 PM »

For a button travel limiter I had imagined attaching a packer and then felt to the keyboard carcass, albeit it would have to be in four sections. Or would this not work?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner HA 114 in G overhaul
« Reply #15 on: January 23, 2022, 08:33:59 PM »

For a button travel limiter I had imagined attaching a packer and then felt to the keyboard carcass, albeit it would have to be in four sections. Or would this not work?
This is difficult to achieve successfully as if you make the packer thick enough to get the desired button height it will be difficult/impossible to refit the keyboard as the buttons will hit the top of the keyboard

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner HA 114 in G overhaul
« Reply #16 on: January 23, 2022, 09:27:21 PM »

Ah, thanks Lester, I thought it might be more complicated than it looked. I'll need to experiment then.

Also, I noticed that the wooden pallets are only attached at the centre (where the fabric circles are), which allows movement of the pallet to seat flush against the frame. I can't imagine this helps the speed of the action however.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HA 114 in G overhaul
« Reply #17 on: January 23, 2022, 11:27:28 PM »

Ah, thanks Lester, I thought it might be more complicated than it looked. I'll need to experiment then.

Also, I noticed that the wooden pallets are only attached at the centre (where the fabric circles are), which allows movement of the pallet to seat flush against the frame. I can't imagine this helps the speed of the action however.
You would want to fix any movement where the metal arm attaches to the pallet, it won’t help in several ways.
It should be glued tight.

Looks like the felt /leathers on the pallets may have been done recently ( look newer to me )and maybe not properly attached?
« Last Edit: January 23, 2022, 11:32:40 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner HA 114 in G overhaul
« Reply #18 on: January 24, 2022, 08:09:57 PM »

Yes at the moment the metal arm to wooden pallet connection is effectively pinned or hinged, which doesn't seem right. However I have seen a picture of another 114 with those circle fabric bits on the pallets. I'm not sure it's been done that recently. The other thing I notice is that the felt is a fraction of the thickness of other instruments I've got (mainly piano accordions).
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HA 114 in G overhaul
« Reply #19 on: January 24, 2022, 09:18:56 PM »

Yes at the moment the metal arm to wooden pallet connection is effectively pinned or hinged, which doesn't seem right. However I have seen a picture of another 114 with those circle fabric bits on the pallets. I'm not sure it's been done that recently. The other thing I notice is that the felt is a fraction of the thickness of other instruments I've got (mainly piano accordions).
The circles are more of a back up to the connection.  traditional would be waxed, I believe.
I used PVA on my 1040 plus the circles ( roughing up the metal arm a bit so the glue can grab).
Others here just use hot glue, it all works if the pallet is held in place when finished.
I could be off here but most 1040 I’ve seen just have leathers on the pallets / not felt and leather.
Maybe yours was waxed and the wax is just gone?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal