Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Hohner HA 114 in G overhaul  (Read 1995 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HA 114 in G overhaul
« Reply #20 on: January 24, 2022, 11:19:35 PM »

Whatever you do don’t put glue into the slot that the arm sits in.  If you do that it will be impossible to get the pallet off again, and the next person to work on the pallets will curse you!

You can use a much longer cloth patch glued on top, or hot belt glue.  Either will hold the pallets securely.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Hohner HA 114 in G overhaul
« Reply #21 on: January 25, 2022, 02:09:39 AM »

I second what Theo said! Do not put glue in the slot. Hot melt glue works very well and is also very easy to remove/cleanup when necessary.

In regards to an earlier comment about wax - Hohner uses glue for the pallets, while most Italian makers use wax.
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HA 114 in G overhaul
« Reply #22 on: January 25, 2022, 02:11:36 AM »

Whatever you do don’t put glue into the slot that the arm sits in.  If you do that it will be impossible to get the pallet off again, and the next person to work on the pallets will curse you!

You can use a much longer cloth patch glued on top, or hot belt glue.  Either will hold the pallets securely.
Sorry Theo! I didn’t mean to give bad advice,  I just repeated what I saw on the box I inherited, which was probably repaired last by O’Byrne Dewitt ( their label was repairing a crack in the fondo ). I’m not saying they did the pallets they probably didn’t. I don’t think any other work was done over the years ( it was a mess ).
It was glued in the slot ( possibly hide or fish glue) and with cloth glued over the arm. The glue used then wasn’t the full length of the arm , just a dab under the dot area, but down in the slot.  I’m pretty sure what I did would come right off again. Well maybe it will in another 100yrs. >:E

mselic@ yes on my hohner boxes pallets have been glued on.
« Last Edit: January 25, 2022, 02:15:29 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Lewis Powell-Reid

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Hohner HA 114 in G overhaul
« Reply #23 on: January 25, 2022, 09:59:02 AM »

My one's definitely just had a thick glue (not wax) placed under the fabric circles only, not along the length of the pallet. I don't know if the wooden part has always had play in it, or if it's just developed over time.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal