Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Porous sound plate and / or the entire housing.  (Read 787 times)

0 Members and 1 Guest are viewing this topic.

Davor

  • Davor
  • Member
  • *
  • Offline Offline
  • Posts: 23
  • Melodeon enthusiast
Porous sound plate and / or the entire housing.
« on: January 23, 2022, 11:02:09 AM »

Now I am just restoring an accordion from the early 1920s (Hohner Organola) and I have one unusual problem. I completely restored the bellow and tested it. It is airtight. No air leaks between the bellows and the hull (gasket?) can be heard or to feel on the seals too. The covers / valves on the tones have new felt and new soft lamb leather, springs checked and, either in good condition, or replaced (bass side) with new ones. But the melodeon still leaks air rather strongly. It is possible to play it, but not with enjoyment...
Is it possible that it is porous wood from the soundboard? Maybe there's a little worm holes or I don't know what? Is it possible to coat the case and soundboard from within with something so that the tonal characteristics are not lost, but everything is airtight? Maybe I can use a thicker shellac, diluted white glue or something synthetic as a varnish? ...There’s also something like liquid rubber (for car tires), but I’ve never worked with that...
I have restored more than two dozen melodeons, even older ones, build one from the scratch, but this is the first such case.
If you have any good advice...?
Logged
Castagnari Studio, Claude, Erica, Hohner IIM, Hohner Norma, Hohner Moldel I, Hohner IIIBS, Hohner III B, Organola, Scandalli V. Rossone

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Porous sound plate and / or the entire housing.
« Reply #1 on: January 23, 2022, 11:08:17 AM »

The first thing I would try, as it's happened more than once to me on boxes I've had in my workshop, is to run a bead of pva wood glue around the edge of the soundboard where it meets the casework. This gap can become leaky as the box ages and the original glue in the joint fails.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Porous sound plate and / or the entire housing.
« Reply #2 on: January 23, 2022, 11:27:26 AM »

...There’s also something like liquid rubber (for car tires), but I’ve never worked with that...

Artist's masking fluid is a paint on rubber skin. Not very robust, though.
https://www.amazon.co.uk/masking-fluid/s?k=masking+fluid
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Davor

  • Davor
  • Member
  • *
  • Offline Offline
  • Posts: 23
  • Melodeon enthusiast
Re: Porous sound plate and / or the entire housing.
« Reply #3 on: January 23, 2022, 11:41:12 AM »

The first thing I would try, as it's happened more than once to me on boxes I've had in my workshop, is to run a bead of pva wood glue around the edge of the soundboard where it meets the casework. This gap can become leaky as the box ages and the original glue in the joint fails.

Yes, the joints were not in good condition so I repaired them the way you described. Now I remembered that maybe I should also check the screws that connect the structure of the the lever bar with the soundboard. I'll take a look at that too, but it should be ok because it can be seen that the screws are tight in the hole.
Logged
Castagnari Studio, Claude, Erica, Hohner IIM, Hohner Norma, Hohner Moldel I, Hohner IIIBS, Hohner III B, Organola, Scandalli V. Rossone

Davor

  • Davor
  • Member
  • *
  • Offline Offline
  • Posts: 23
  • Melodeon enthusiast
Re: Porous sound plate and / or the entire housing.
« Reply #4 on: January 23, 2022, 11:43:10 AM »

...There’s also something like liquid rubber (for car tires), but I’ve never worked with that...

Artist's masking fluid is a paint on rubber skin. Not very robust, though.
https://www.amazon.co.uk/masking-fluid/s?k=masking+fluid


I don't have any experience with that. Do you  (:)? You think, they won't make a layer that resonates?
Logged
Castagnari Studio, Claude, Erica, Hohner IIM, Hohner Norma, Hohner Moldel I, Hohner IIIBS, Hohner III B, Organola, Scandalli V. Rossone

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Porous sound plate and / or the entire housing.
« Reply #5 on: January 23, 2022, 12:07:54 PM »

...There’s also something like liquid rubber (for car tires), but I’ve never worked with that...

Artist's masking fluid is a paint on rubber skin. Not very robust, though.
https://www.amazon.co.uk/masking-fluid/s?k=masking+fluid

I have used it a lot in art and graphics. It's latex in a solvent. It gives a thin skin which would probably not interfere with the acoustic properties but (and this is my main point) would NOT be robust enough to stay airtight for long. I wouldn't recommend it in this application.
« Last Edit: January 23, 2022, 12:11:32 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Porous sound plate and / or the entire housing.
« Reply #6 on: January 23, 2022, 12:16:35 PM »

I've not come across a soundboard that is porous unless there were visible worm holes, or screw holes  or cracks.  I have come across bellows that are porous.  No visible holes in gussets or elsewhere, but small amounts of air were apparently escaping from a large number of places.  The individual leaks were too slight to feel.  That was on an old Hohner Club that I play regularly.  Fitting new bellows made it as airtight as a new box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Davor

  • Davor
  • Member
  • *
  • Offline Offline
  • Posts: 23
  • Melodeon enthusiast
Re: Porous sound plate and / or the entire housing.
« Reply #7 on: January 23, 2022, 12:21:03 PM »

...There’s also something like liquid rubber (for car tires), but I’ve never worked with that...

Artist's masking fluid is a paint on rubber skin. Not very robust, though.
https://www.amazon.co.uk/masking-fluid/s?k=masking+fluid

I have used it a lot in art and graphics. It's latex in a solvent. It gives a thin skin which would probably not interfere with the acoustic properties but (and this is my main point) would NOT be robust enough to stay airtight for long. I wouldn't recommend it in this application.


Thanks for the advice. I probably won’t try it but if I will go with shellac (if I decide to go in that direction)  in a thicker layer.
Logged
Castagnari Studio, Claude, Erica, Hohner IIM, Hohner Norma, Hohner Moldel I, Hohner IIIBS, Hohner III B, Organola, Scandalli V. Rossone

Davor

  • Davor
  • Member
  • *
  • Offline Offline
  • Posts: 23
  • Melodeon enthusiast
Re: Porous sound plate and / or the entire housing.
« Reply #8 on: January 23, 2022, 12:27:39 PM »

I've not come across a soundboard that is porous unless there were visible worm holes, or screw holes  or cracks.  I have come across bellows that are porous.  No visible holes in gussets or elsewhere, but small amounts of air were apparently escaping from a large number of places.  The individual leaks were too slight to feel.  That was on an old Hohner Club that I play regularly.  Fitting new bellows made it as airtight as a new box.


Yes, that was the first thing that came to my mind, so I took off the bellow, closed it with so called forex plates (type of sturdy foam) and tested how much air it hold I had to put in the strength in to move it. Also, there were a lot of visible worm holes, but I repaired them, each one individually. That's why I think the problem is the porosity of the wood. Maybe the board is "drilled" from the horizontally inside, but since I don’t have an x-ray sight ... (:)

« Last Edit: January 23, 2022, 01:52:23 PM by Davor »
Logged
Castagnari Studio, Claude, Erica, Hohner IIM, Hohner Norma, Hohner Moldel I, Hohner IIIBS, Hohner III B, Organola, Scandalli V. Rossone
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal