Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: What do we mean by LMH and similar descriptions?  (Read 6180 times)

0 Members and 1 Guest are viewing this topic.

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
What do we mean by LMH and similar descriptions?
« on: January 28, 2022, 02:16:22 PM »

In another thread, Peadar said:

The really simple bit of information that everyone has skipped over in this thread is that Low, medium and high voices are an octave apart, The two octave range of a 10 button row starts (on 3rd button) with the fundamental nearest middle C of a piano.

the "M" range start notes are G A B C (middle C) D E F.

two voice boxes are usually MM. So G/C, A/D, B/E, C/F are all voiced MM/MM .... BUT when you go to a D/G the G is high voice. So a D/G is voiced MM/HH. Many D/G players don't know this.....and lets face it, if all you play is D/G it doesn't matter.

I'm no expert, but to me this seem like a misunderstanding.  Low, Medium and High don't refer to pitch relative to middle C but to the relative pitches of the banks of reeds.  The concept comes from pipe organs, where the terms 16', 8' and 4' pitch describe the pitch the keyboard plays when the appropriate stop is selected.

On an organ, 8' pitch is "normal".  When the 16' stop is used the whole keyboard plays an octave lower, and at 4' pitch an octave higher.  This description applies to the whole range of the keyboard (which is considerably wider than a melodeon or PA keyboard),  Even though the frequencies may overlap.  They don't speak of one end of the keyboard being at one pitch and the other end at a higher pitch, which is what I understand Peadar is saying should apply to the D/G melodeon.  The A above middle C in 8' pitch is at 440 Hz; when the 16' stop is selected there will also be a different key which will play A=440Hz, but that part of the keyboard wouldn't be described as being at 8' pitch.

This terminology is also used to describe piano accordions as an alternative to the LMMH usually used for melodeons. The normal MM instrument is at 8' pitch, and this apples to the whole keyboard regardless of the frequencies of the notes.  If your instrument has stops or switches then you may be able to select a 16' (L) bank or a 4' (H) bank, but again these descriptions apply to the whole keyboard regardless of where the notes lie relative to middle C.

What this doesn't seem to address, and what I think Peadar is getting at, is how to describe the actual pitch of an instrument.  How do you indicate that the G row of a G/C is an octave lower than the G row on a D/G, when both instruments would be described as MM?  Is it simply that there are recognised standard pitches across the entire melodeon family and so it is thought unnecessary?  Presumably a D/G pitched an octave lower than normal would be described as LL even though the frequencies would be the same as the MM G/C?

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: What do we mean by LMH and similar descriptions?
« Reply #1 on: January 28, 2022, 02:35:39 PM »

Presumably a D/G pitched an octave lower than normal would be described as LL even though the frequencies would be the same as the MM G/C?

If there was such a thing, it might be called a "baritone melodeon" as we do with concertinas in this situation.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: What do we mean by LMH and similar descriptions?
« Reply #2 on: January 28, 2022, 02:51:08 PM »

I've always found that the way L M and H are used in this context are as relative pitches based on the conventional pitch of the instrument.  So on a DG the "M" reeds for the G row are an octave higher than M on a one row in G or the G row of a CG.  This is a clear and unambiguous way to describe the relative pitches of reed banks.   Non-standard boxes, such as a low pitch DG, or a high pitch GC are so rare that it's sufficient to add a few words of description to make it clear.  in nearly 20 year working as a tuner I think I've only come across a single two voice DG that was pitched an octave lower than normal, and I've not seen a single example of a GC that was pitched higher than normal.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: What do we mean by LMH and similar descriptions?
« Reply #3 on: January 28, 2022, 05:35:06 PM »

Put it another way...
Do we agree that  4 stops are usually voiced LMMH?
I have a HA114/G.
What is the frequency of the start note of each bank of reeds?
I also have a Pokerwork D/G, conventionally considered MM.
What is the Frequency of the start note of each Bank of Reeds?


Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: What do we mean by LMH and similar descriptions?
« Reply #5 on: February 01, 2022, 10:54:20 AM »

If it's of any help, here is a description of the relative height of notes Italian reed makers use.
You'll see that it confirms L, M, and H are relative terms, as many of them overlap each other.

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: What do we mean by LMH and similar descriptions?
« Reply #6 on: February 01, 2022, 12:20:09 PM »

I also have a Pokerwork D/G, conventionally considered MM.
What is the Frequency of the start note of each Bank of Reeds?

I've just checked my D/G against a tuner.  It's not a pokerwork, but it's similarly pitched and is LMM with stops so I can isolate the reed banks. 

In the M bank of reeds the low G4 is 392 Hz.  The middle G5 is 787 Hz and the highest (G6) 1578 Hz

In the L bank it's an octave lower at G3 196 Hz,  G4 at 392 Hz and G5 at 787 Hz

As you can see, the ranges overlap considerably. 

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: What do we mean by LMH and similar descriptions?
« Reply #7 on: February 01, 2022, 02:47:24 PM »

I don't think anyone disagrees that there is an overlap between the ranges.

As Theo mentioned, LMH is relative and meaningful within the context of a given instrument. 

On my one-row HA 112 in G (an MM box), the low G is G3.  This would be an L bank in the context of a D/G box.


Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: What do we mean by LMH and similar descriptions?
« Reply #8 on: February 02, 2022, 09:42:39 AM »

I don't think anyone disagrees that there is an overlap between the ranges.

I started this thread because of something Peadar wrote in a different thread, in which he appeared to be saying that the designations are absolute and refer to sections of the scale with no overlap, rather than the relative banks of reeds.  He argued that an MM D/G box should really be described as MM/HH, because it goes into the higher scale.  I may have misunderstood him, but I took him to mean that, for example, G5 should always be described as H regardless of which bank of reeds the note is found in.

These descriptions are routinely used, but I don't think I've ever seen the meaning spelled out. My own understanding was just an assumption on my part, based on how I saw them being used, but it is entirely understandable that someone else might interpret them differently, and I meant no criticism of Peadar by asking the question, I was simply seeking clarification.

I wonder whether it is worth adding something to the "Voices and Tunings" section? This makes full use of these terms, but despite being admirably clear in most respects (as we would expect from Steve Dumpleton) it doesn't address this, although it can be inferred. The closest it comes is in describing M as the "middle range" where A=440 Hz.  As someone with only a hazy grasp of music theory I don't find this immediately understandable, and it could equally well be interpreted the way I think Peadar has done.






Mike Farrington

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: What do we mean by LMH and similar descriptions?
« Reply #9 on: April 09, 2023, 09:28:07 PM »

Interesting to read all of this, as I have a Dino Baffetti 3 voice bass/baritone G/D box.  Two voices gives the baritone (LL?) so an octave below a normal melodeon and then a stop brings in the bass a further octave below (what ever letter signifies that). From what I’ve seen it’s not a very common type box at all.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: What do we mean by LMH and similar descriptions?
« Reply #10 on: April 09, 2023, 09:33:59 PM »

Interesting to read all of this, as I have a Dino Baffetti 3 voice bass/baritone G/D box.  Two voices gives the baritone (LL?) so an octave below a normal melodeon and then a stop brings in the bass a further octave below (what ever letter signifies that). From what I’ve seen it’s not a very common type box at all.

That's interesting, I've not seen one of those and would love to hear it. I have a Castagnari Roma LLL which is very low so yours must be a real growler.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: What do we mean by LMH and similar descriptions?
« Reply #11 on: April 10, 2023, 09:16:01 AM »


   A parallel, but related concept is in describing layouts.  The usage has to be “relative” - otherwise inconsistencies arise.

   As people develop web or other simulators, et cetera it begs the question as to which is the “main” reed attached to a right hand button. This and other threads influenced my own decisions wrt my rodec project, intended as a universal machine readable melodeon descriptor, using pure ascii text. Example:

Code: [Select]
name: 2-row 8-bass 3rd-start G/Caccs
index: 10
blacknotes: C# Eb F# Ab Bb
transpose: 10
left:
                             G4/D4   G0/D0   C4/G4   C0/G0
                             E4/a4   E0/A0   F4/F4   F0/F0
right:
    Bb4/Ab4  G4/B4   C4/D4   E4/F4   G4/A4   C5/B4   E5/D5   G5/F5   C6/A5   A6/B5
Db2/Eb2  D4/F#4  G4/A4   B4/C4   D4/E4   G4/F#4  B4/A4   D5/C5   G6/E5   B5/F#5  D6/A5

  This is the ‘entry’ layout at https://chrisryall.net/rodecs/ and describes a 3rd start G/C 2-row 8 bass machine. The simplest and safest convention was to work “by convention” in terms of its ‘M’ voicing.  The C4/D4 home button describes its ‘M’ voice to be those notes in piano 4th octave. ie middle-C,D


   Note that L,M,H, M,M’ etctera are not part of the rodec description. Why? Because it describes layout. Anyone implementing a melodeon simulation could set up that button to voice  any way they like, or more likely offer the client a choice of various voicings?

   The question for this thread is whether when playing a real machine, we think in terms of the note being played as being its M voice? I do.
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: What do we mean by LMH and similar descriptions?
« Reply #12 on: April 10, 2023, 10:19:23 AM »

Interesting to read all of this, as I have a Dino Baffetti 3 voice bass/baritone G/D box.  Two voices gives the baritone (LL?) so an octave below a normal melodeon and then a stop brings in the bass a further octave below (what ever letter signifies that). From what I’ve seen it’s not a very common type box at all.

If we are being careful about the meaning of LMH etc then we should also be careful about the keys of the instrument.   It's conventional to name the rows starting from the outside row and working in, so it should be DG and not GD.   I have once heard of a GD, that is with the G row on the outside of the D row.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mike Farrington

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: What do we mean by LMH and similar descriptions?
« Reply #13 on: April 10, 2023, 01:15:22 PM »

Thanks for the correction for the 'keys' of my box Theo.... so have you any suggestions/thoughts to what letter is used for the bass voice?
Logged

Mike Farrington

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: What do we mean by LMH and similar descriptions?
« Reply #14 on: April 10, 2023, 01:24:41 PM »

Interesting to read all of this, as I have a Dino Baffetti 3 voice bass/baritone G/D box.  Two voices gives the baritone (LL?) so an octave below a normal melodeon and then a stop brings in the bass a further octave below (what ever letter signifies that). From what I’ve seen it’s not a very common type box at all.

That's interesting, I've not seen one of those and would love to hear it. I have a Castagnari Roma LLL which is very low so yours must be a real growler.
Hi Rees I tried to attach a vid of me playing the box but it was far too big for what this site allows
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: What do we mean by LMH and similar descriptions?
« Reply #15 on: April 10, 2023, 01:50:43 PM »

It is very low pitch.  Some of the notes in the lowest voice on the RHS will be lower in pitch than the lowest bass reed on the LHS of a typical box.  Is the yiu box physically larger than a normal 3 voice instrument?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: What do we mean by LMH and similar descriptions?
« Reply #16 on: April 10, 2023, 02:18:01 PM »

If we are being careful about the meaning of LMH etc then we should also be careful about the keys of the instrument.   It's conventional to name the rows starting from the outside row and working in, so it should be DG and not GD.   I have once heard of a GD, that is with the G row on the outside of the D row.

I’ve played one. Dave Robert’s Castagnari, vintage late 1980s was G/D. He had bought it at Sidmouth, in the first year that the family got there to promote sales of their fisharmonicas. They had learned about the popular British session keys … a little late. Dave told me that they simply retuned the C row of a G/C Continental model up by 2 semitones!  he played it amazingly well in the circumstances. It … hurt my brain.
Logged
  _       _    _      _ 

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: What do we mean by LMH and similar descriptions?
« Reply #17 on: April 10, 2023, 02:32:38 PM »



 Dave Robert’s Castagnari...he played it amazingly well in the circumstances. It … hurt my brain.

Most things Dave Roberts played on any melodeon hurt my brain.
God bless x :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: What do we mean by LMH and similar descriptions?
« Reply #18 on: April 10, 2023, 02:38:40 PM »

Interesting to read all of this, as I have a Dino Baffetti 3 voice bass/baritone G/D box.  Two voices gives the baritone (LL?) so an octave below a normal melodeon and then a stop brings in the bass a further octave below (what ever letter signifies that). From what I’ve seen it’s not a very common type box at all.
Assuming it's a D/G

What I have said months ago - from trying to make sense of voicings generally, is that the Start note of an MM box in C appears to be middle C. A High Voice reed bank in C starts an octave above and a Low voice reed bank in C starts an octave below (  3rd button start being traditional on 10 & 9 key rows).

Experience says that a four stop LMMH in G has it's mid voices starting on the G below middle C. As do 2 voice 1 rows in G. I have a couple of elderly 1 row 2 stops in F....the start on those is F above middle C. This appears to me to cover the range of start notes for mid voice reed banks. With Middle C as the reference mid point of the M voice start notes.

In Two row terms, MM/MM boxes include G/C, A/D, B/E and C/F. Once we get to D/G the G voice is inevitably in the next voice up. usually MM/HH .... but could be LL/MM....which may be where your box siiting... with a third lower voice. 
Logged

Mike Farrington

  • Member
  • *
  • Offline Offline
  • Posts: 6
Re: What do we mean by LMH and similar descriptions?
« Reply #19 on: April 10, 2023, 03:01:24 PM »

It is very low pitch.  Some of the notes in the lowest voice on the RHS will be lower in pitch than the lowest bass reed on the LHS of a typical box.  Is the yiu box physically larger than a normal 3 voice instrument?
Hi. I wouldn't say its any bigger than a normal 3 voice instrument , I've attached a couple of pics.....
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal