Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: My new (and a bit broken) Hohner 1040  (Read 4958 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
My new (and a bit broken) Hohner 1040
« on: February 01, 2022, 08:45:31 PM »

Hi all,

Not a good first purchase unfortunately and I'm hoping my melodeon journey isn't over before it has even begun  :(

The instrument came from a seller in Germany with 100% positive feedback, described as all notes sounding good, with an offer to try before purchase (for local buyers of course), and looking in very good condition. It sounded to me like a pretty safe bet!..

It arrived very well packaged indeed. I manage to get to it eventually. Beautiful. Played through the notes. All good until button 6, but then 'screeech!'. Oh dear...

After a little while playing, notes have started to sound on this button. The button 6 pull 'B' sounds to me like one reed is playing the note rather wheezily, whilst the other is buzzing and shreeking out some overtone from a couple of octaves above! (I have some experience of buzzing with harmonica, misaligned reeds etc). And the button 6 push 'C' sounds as if it's only coming from a single reed.

I had set aside a little money for any teething problems, but unfortunately that was swallowed up by Parcel Force demanding I pay £50 to release the item (I clearly got so bored with the news that I stopped watching!).

I would like to know if this is a simple fix and whether it is something I can manage myself. Otherwise I might have to cut my losses and sell it on to someone who knows what they're doing (I think it's possibly still worth what I paid). I have previous experience tuning harmonicas and aligning reeds, and have tuned and played around with a Scarlatti toy melodeon to get an idea...

Thanks for listening and I hope you can help!..

Arnold
« Last Edit: February 01, 2022, 08:49:55 PM by Arnold »
Logged
Dancing about architecture since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new (and a bit broken) Hohner 1040
« Reply #1 on: February 01, 2022, 09:18:20 PM »

I'm sure an expert will be along any minute, but in the meantime....I'm sure you'll be able to sort it out, it's just a bigger harmonica, after all. Pull the pins out and have a look!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: My new (and a bit broken) Hohner 1040
« Reply #2 on: February 01, 2022, 09:22:00 PM »

Hi Arnold...

The first one is always the worst if things go wrong. You've fettled your harmonicas a bit so when you get to the reeds you know more than many beginners.

Pair of good pliers and a soldering iron. There are 4 "bellows pins" on each end of the instrument. two on the front , two on the back. If you can pull the ones on the treble end out then the treble end case work will pull (be gentle!) away from the bellows frame. Try to turn the bellows pins with the pliers a fractin before you draw them. Sometimes they can be rusted in. Less common with boxes from continental europe - unless it's lived near a chemical plant. If they won't turn and draw fairly easily get the soldering iron good and hot and apply it to the sticking bellows pin head. This can help break them out. If that doesn't work first time - heat even to the point that smoke rises is OK.

The you can lookat the reeds.

In a 1040 they are flat mounted in very simple reed chambers formed of strip wood glued to the fondo. You'll soon see if there is a broken reed or something of that nature. Broken reeds can be replaced....but let's cross that bridge after you've opened up the box.

PS - Lester recommends using end on wire cutters.....don't go there (too easy to accidentally cut the head off the recalcitrant pin. Been there. Done that.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My new (and a bit broken) Hohner 1040
« Reply #3 on: February 01, 2022, 09:23:01 PM »

If you have experience with harmonica reeds then you should be able to get those reeds sounding.  The principles are the same. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: My new (and a bit broken) Hohner 1040
« Reply #4 on: February 01, 2022, 09:28:18 PM »

PS - Lester recommends using end on wire cutters.....don't go there (too easy to accidentally cut the head off the recalcitrant pin. Been there. Done that.
You must have much better end cutters than me :)

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #5 on: February 01, 2022, 09:33:42 PM »

Hi Arnold...

The first one is always the worst if things go wrong. You've fettled your harmonicas a bit so when you get to the reeds you know more than many beginners.

Pair of good pliers and a soldering iron. There are 4 "bellows pins" on each end of the instrument. two on the front , two on the back. If you can pull the ones on the treble end out then the treble end case work will pull (be gentle!) away from the bellows frame. Try to turn the bellows pins with the pliers a fractin before you draw them. Sometimes they can be rusted in. Less common with boxes from continental europe - unless it's lived near a chemical plant. If they won't turn and draw fairly easily get the soldering iron good and hot and apply it to the sticking bellows pin head. This can help break them out. If that doesn't work first time - heat even to the point that smoke rises is OK.

The you can lookat the reeds.

In a 1040 they are flat mounted in very simple reed chambers formed of strip wood glued to the fondo. You'll soon see if there is a broken reed or something of that nature. Broken reeds can be replaced....but let's cross that bridge after you've opened up the box.

PS - Lester recommends using end on wire cutters.....don't go there (too easy to accidentally cut the head off the recalcitrant pin. Been there. Done that.

Very helpful, thank you. I poked and pulled around with those pins a little bit with my fingers but they're clearly far stiffer than those on the Scarlatti toy! I will give it a go with the pliers etc when I have some time to myself, I'm currently trying to hide from the other half the fact that I may have spent my hard earned cash on a dud!...
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #6 on: February 01, 2022, 09:38:29 PM »

If you have experience with harmonica reeds then you should be able to get those reeds sounding.  The principles are the same.

I do, yes, I hope so but harmonicas are far cheaper so I'm a little less cautious about them!.. Hmm, wondering whether to open the box now...
Logged
Dancing about architecture since 1997

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: My new (and a bit broken) Hohner 1040
« Reply #7 on: February 01, 2022, 09:47:21 PM »

PS - Lester recommends using end on wire cutters.....don't go there (too easy to accidentally cut the head off the recalcitrant pin. Been there. Done that.

I recently discovered that nail clippers make effective bellows pin pullers! ;D Have not accidentally clipped off a pin yet.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: My new (and a bit broken) Hohner 1040
« Reply #8 on: February 01, 2022, 09:49:03 PM »

I'm currently trying to hide from the other half the fact that I may have spent my hard earned cash on a dud!...

They are almost always repairable. Check out the rest of the notes. The horror screech may be from some genius putting a reed plate in the wrong way round....or as I have just found putting a completely inappropriate reed plate in as a replacement.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: My new (and a bit broken) Hohner 1040
« Reply #9 on: February 01, 2022, 09:51:34 PM »

If you have experience with harmonica reeds then you should be able to get those reeds sounding.  The principles are the same.

I do, yes, I hope so but harmonicas are far cheaper so I'm a little less cautious about them!.. Hmm, wondering whether to open the box now...

Go on.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #10 on: February 01, 2022, 09:57:16 PM »

Ok, the pins were really rusted in so difficult to get out but I just about managed. Can the rust be removed or should I get new ones from somewhere?..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #11 on: February 01, 2022, 10:00:30 PM »

Ok. I have a dead reed. Must have been button 7 not 6. Feels like its just stuck or wedged in the slot and doesn't make a note when plinked..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #12 on: February 01, 2022, 10:04:07 PM »

A bit more plinking, it's now making a sound but more like 'D' than 'E'. Just the 'push' notes for now, not sure how to get to the 'pull'..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #13 on: February 01, 2022, 10:09:28 PM »

Well, this is very strange. Could it be that the D/E reed plate on one of the rows of reeds has been put in the wrong way? Because I seem to have a D on the outside and E on the inside on one row. And an E on the outside and D on the inside on the other (where they should be). Not sure why they weren't sounding at all though... How odd!
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: My new (and a bit broken) Hohner 1040
« Reply #14 on: February 01, 2022, 10:15:10 PM »

If they are  original reeds the H or T should be visible on every plate.
If not, something's upside down, or not original
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #15 on: February 01, 2022, 10:18:57 PM »

If they are  original reeds the H or T should be visible on every plate.
If not, something's upside down, or not original

Well I'll be blowed! Indeed the upside down reed is the only one with no 'H'. Could it be that it is on the other side?..
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: My new (and a bit broken) Hohner 1040
« Reply #16 on: February 01, 2022, 10:21:48 PM »

One way to find out.......
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #17 on: February 01, 2022, 10:27:56 PM »

One way to find out.......

That's a little advanced for me I think!? I'll come back to it tomorrow.

Quick question: Can I use vaseline or something on pins so they go back in and come back out more easily?..

Thanks for all the help!  (:)
Logged
Dancing about architecture since 1997

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: My new (and a bit broken) Hohner 1040
« Reply #18 on: February 01, 2022, 10:35:09 PM »

Assuming the seller spoke the truth [and it played ok before he sent it off] the plate will be the right way up.

Have you tried playing the duff notes really hard, repeatedly (with the box fully assembled). That oftens sorts things out.

Like Peader says. it's likely to be an easy fix. Worst that can happen is you'll need someone with a bit of expertise to sort it, but it's not likely to take them long, or cost a fortune.

Don't use Vaseline on anything.
« Last Edit: February 01, 2022, 10:44:21 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: My new (and a bit broken) Hohner 1040
« Reply #19 on: February 01, 2022, 10:35:52 PM »

You can clean up a pin by sticking it in a drill and carefully applying some fine abrasive paper while it's moving at a low speed. A touch of candle wax while it's spinning will make re use a bit easier, though new pins are a better idea.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal