Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4   Go Down

Author Topic: My new (and a bit broken) Hohner 1040  (Read 4974 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #20 on: February 01, 2022, 10:43:37 PM »

Assuming the seller spoke the truth the plate will be the right way up.

Have you tried playing the duff notes really hard, repeatedly (with the box fully assembled). That oftens sorts things out.

Like Peader says. it's likely to be an easy fix. Worst that can happen is you'll need someone with a bit of expertise to sort it, but it's not likely to take them long, or cost a fortune.

Don't use Vaseline on anything.

It certainly seems that the seller was either dishonest or ignorant, because the plate is definitely the wrong way up! I'm using a plinker and I get a 'D' on the outside reed, and when I prod the inside reed under the valve I get an E. On the adjacent plate these notes are the other way around and as you would expect them. I've already over spent with the unforeseen extra postage unfortunately...
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #21 on: February 01, 2022, 10:48:15 PM »

Can't get the pins back in now. Don't want to force them in case I can't get them back out again!..
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: My new (and a bit broken) Hohner 1040
« Reply #22 on: February 01, 2022, 10:54:33 PM »

Where are you?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #23 on: February 01, 2022, 10:55:59 PM »

Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: My new (and a bit broken) Hohner 1040
« Reply #24 on: February 01, 2022, 11:01:41 PM »

I'm in Lewes if you need help. I might be in Tunbridge Wells in the next few days.
There are quite a few players in Kent, might be a fettler too.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #25 on: February 01, 2022, 11:06:57 PM »

I'm in Lewes if you need help. I might be in Tunbridge Wells in the next few days.
There are quite a few players in Kent, might be a fettler too.

That's very good of you to offer. I am in East Kent and not able to travel far at the moment and would have to send the melodeon off in the post. I will have to get some quotes for repair or further tuition from somewhere and weigh everything up, otherwise I'll just have to sell it on and cut my losses...
Logged
Dancing about architecture since 1997

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: My new (and a bit broken) Hohner 1040
« Reply #26 on: February 01, 2022, 11:08:58 PM »

Cheer up Arnold. Look upon it as an opportunity to get to know your box better. I'm sure you'll get plenty of support. 1040s are great little boxes and well worth a bit of effort.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #27 on: February 01, 2022, 11:11:56 PM »

Cheer up Arnold. Look upon it as an opportunity to get to know your box better. I'm sure you'll get plenty of support. 1040s are great little boxes and well worth a bit of effort.

Thanks. Yes, a little deflated by the situation, can't even find replacement pins!.. I'll come back to it tomorrow. See you then!..
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: My new (and a bit broken) Hohner 1040
« Reply #28 on: February 01, 2022, 11:16:14 PM »

Yes it's a good box to play, and play with.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: My new (and a bit broken) Hohner 1040
« Reply #29 on: February 01, 2022, 11:43:04 PM »

So far as the mystery of the pins that won't go back in; it's important to keep everything the right way round and in the right order. Put pins back in the hole they came out of. They don't usually need forcing. If they don't line up, have you turned the bellows round a different way? Not likely to happen in normal situations,  but I've done it...once. The pins you have will, almost certainly not need replacing, unless you've broken them (it can happen).

If you need spare parts, the go to place is Charlie Marshall. http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html
If you can't see what you need on his website you can try contacting him by email. He is really helpful. You can also ask for help on this site.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

MatlockBather

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 131
  • B/C and proud
Re: My new (and a bit broken) Hohner 1040
« Reply #30 on: February 02, 2022, 07:05:44 AM »

Hi Arnold. Try and track down Pip Ives, he used to be the box fettler in Hobgoblin, Canterbury. Don't know if he still works there but he offered all sorts of box related services (lessons, tuning etc).
Si
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #31 on: February 02, 2022, 08:27:20 AM »

So far as the mystery of the pins that won't go back in; it's important to keep everything the right way round and in the right order. Put pins back in the hole they came out of. They don't usually need forcing. If they don't line up, have you turned the bellows round a different way? Not likely to happen in normal situations,  but I've done it...once. The pins you have will, almost certainly not need replacing, unless you've broken them (it can happen).

If you need spare parts, the go to place is Charlie Marshall. http://www.cgmmusical.co.uk/CGM_Musical_Services/Welcome.html
If you can't see what you need on his website you can try contacting him by email. He is really helpful. You can also ask for help on this site.

Ooops, didn’t even think about that. Pins is pins, or so I thought! Definitely the right way though, I learned that from the Scarlatti toy! Could I not just put a little olive oil on them for now perhaps?..

That website is just what I need, thanks!!
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #32 on: February 02, 2022, 08:33:46 AM »

Hi Arnold. Try and track down Pip Ives, he used to be the box fettler in Hobgoblin, Canterbury. Don't know if he still works there but he offered all sorts of box related services (lessons, tuning etc).
Si

I will. That’s very helpful, thanks  (:)
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: My new (and a bit broken) Hohner 1040
« Reply #33 on: February 02, 2022, 08:38:49 AM »

Not oil.
Just make sure to clean the surface of the pins, then maybe some candle wax. Twist them in holding the head with pliers if you need. Make sure the holes are nicely aligned, sometimes the gasket needs to be more compressed.
And another vote for Pip Ives. Faversham, I think
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new (and a bit broken) Hohner 1040
« Reply #34 on: February 02, 2022, 08:40:21 AM »

"Could I not just put a little olive oil on them for now"

Bad idea, as has already been said. The oil will sink into the wood and the hole will tighten.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #35 on: February 02, 2022, 11:17:53 AM »

"Could I not just put a little olive oil on them for now"

Bad idea, as has already been said. The oil will sink into the wood and the hole will tighten.

So now I know why it’s a bad idea. Thanks!
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #36 on: February 02, 2022, 11:19:12 AM »

Not oil.
Just make sure to clean the surface of the pins, then maybe some candle wax. Twist them in holding the head with pliers if you need. Make sure the holes are nicely aligned, sometimes the gasket needs to be more compressed.
And another vote for Pip Ives. Faversham, I think

Good info. Thanks!
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My new (and a bit broken) Hohner 1040
« Reply #37 on: February 02, 2022, 11:52:52 AM »

Clean all the rust of the pins before replacing them.  Otherwise the pins act like files and enlarge the holes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #38 on: February 02, 2022, 02:18:18 PM »

Ok. I think I’ve figured out the sequence of events. At some point the melodeon was serviced but one of the Reed plates was put back upside down. In an attempt to remedy this the owner blocked off one of the sets of reeds (I’ll check this evening), hence only one Reed sounding on that button etc. They must have realised this was a rubbish fix, and so decided to sell the instrument to old muggins.

If I am to get this fixed, I will need to recoup some money from the seller. I will contact them and see if they will agree to refund the amount required to cover the cost. Otherwise I will have to open a dispute. It’s a fairly clear case as far as I can tell. I will email someone to get a quote for repairs…
Logged
Dancing about architecture since 1997

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: My new (and a bit broken) Hohner 1040
« Reply #39 on: February 02, 2022, 03:04:34 PM »

Whereabouts in Kent are you Arnold? I’m near Tenterden and might be able to pop over and take a look at it for you.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)
Pages: 1 [2] 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal