Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4   Go Down

Author Topic: My new (and a bit broken) Hohner 1040  (Read 4929 times)

0 Members and 1 Guest are viewing this topic.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: My new (and a bit broken) Hohner 1040
« Reply #40 on: February 02, 2022, 05:16:12 PM »

Can't get the pins back in now. Don't want to force them in case I can't get them back out again!..

Charlie's pins
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellow_Pins.html
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: My new (and a bit broken) Hohner 1040
« Reply #41 on: February 02, 2022, 07:59:58 PM »

Ok. I think I’ve figured out the sequence of events. At some point the melodeon was serviced but one of the Reed plates was put back upside down. In an attempt to remedy this the owner blocked off one of the sets of reeds (I’ll check this evening), hence only one Reed sounding on that button etc. They must have realised this was a rubbish fix, and so decided to sell the instrument to old muggins.

If I am to get this fixed, I will need to recoup some money from the seller. I will contact them and see if they will agree to refund the amount required to cover the cost. Otherwise I will have to open a dispute. It’s a fairly clear case as far as I can tell. I will email someone to get a quote for repairs…

Just remember that if they claim that by opening the box up you have "adjusted" it all the melodeon players you know regard this as part of day to day use of the box. You have found something in there which is outside day to day events.

Personally I suspect that the box took a knock at some point and a reed fell out and got stuffed back in the wrong way round. I doubt fettling (servicing) had anything to do with it.

I can understand why you would go the rebate route - it's entirely appropriate if the box has been misrepresented, as seems to be the case but if you get no result there and it's just one reed wrong way round, prise the reed plate off with the tip of a penknife,turn it round, push it straight back into the hole it left, then boil a small can of water on the stove and put a couple of (thin handled) teaspoons in it up side down. Reed wax melts a below 100C. Using an oven or other insulated glove, take one of the teaspoons out of the pan and gently swipe the (boiling hot) handle down the gap between the loose reed and the next one to it. For a few seconds the teaspoon handle will be hot enough to melt the joint in the wax welding the plate back in. When the teaspoon stops melting the wax switch teaspoons. (More sophisticated types use a temperature controlled soldering iron which does the same job).
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #42 on: February 02, 2022, 08:46:48 PM »

Whereabouts in Kent are you Arnold? I’m near Tenterden and might be able to pop over and take a look at it for you.

That's very nice of you. I am a bit far though. Up near Whitstable...
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #43 on: February 02, 2022, 08:48:47 PM »

Can't get the pins back in now. Don't want to force them in case I can't get them back out again!..

Charlie's pins
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellow_Pins.html

Great website. I might just buy the pins now - the old ones got a bit mangled getting them out!..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #44 on: February 02, 2022, 08:56:13 PM »

Ok. I think I’ve figured out the sequence of events. At some point the melodeon was serviced but one of the Reed plates was put back upside down. In an attempt to remedy this the owner blocked off one of the sets of reeds (I’ll check this evening), hence only one Reed sounding on that button etc. They must have realised this was a rubbish fix, and so decided to sell the instrument to old muggins.

If I am to get this fixed, I will need to recoup some money from the seller. I will contact them and see if they will agree to refund the amount required to cover the cost. Otherwise I will have to open a dispute. It’s a fairly clear case as far as I can tell. I will email someone to get a quote for repairs…


Just remember that if they claim that by opening the box up you have "adjusted" it all the melodeon players you know regard this as part of day to day use of the box. You have found something in there which is outside day to day events.

Personally I suspect that the box took a knock at some point and a reed fell out and got stuffed back in the wrong way round. I doubt fettling (servicing) had anything to do with it.

I can understand why you would go the rebate route - it's entirely appropriate if the box has been misrepresented, as seems to be the case but if you get no result there and it's just one reed wrong way round, prise the reed plate off with the tip of a penknife,turn it round, push it straight back into the hole it left, then boil a small can of water on the stove and put a couple of (thin handled) teaspoons in it up side down. Reed wax melts a below 100C. Using an oven or other insulated glove, take one of the teaspoons out of the pan and gently swipe the (boiling hot) handle down the gap between the loose reed and the next one to it. For a few seconds the teaspoon handle will be hot enough to melt the joint in the wax welding the plate back in. When the teaspoon stops melting the wax switch teaspoons. (More sophisticated types use a temperature controlled soldering iron which does the same job).

Yes, you have a good point there. Hopefully the seller will accept the situation and we can come to an agreement. I won't ask for anything more that required and he'll still have made a reasonable amount from the sale...

And thanks for all the amazing fettling information. At least I am learning lots and that may just be within my general fixing abilities!..
Logged
Dancing about architecture since 1997

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: My new (and a bit broken) Hohner 1040
« Reply #45 on: February 02, 2022, 10:23:22 PM »

Normal way to get rusty pins back in is to a) clean em with emery cloth b) put some wax on them (candle wax is ok). They will go back in easily (i use a tack hammer). If the gasket causes the casing to misalign the holes you can gently press the casing to squish the gasket to get the holes to line up. In fact I always put a little pencil mark on the bellows so always get them back on the same way they came off.
« Last Edit: February 02, 2022, 10:26:17 PM by RogerT »
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: My new (and a bit broken) Hohner 1040
« Reply #46 on: February 02, 2022, 10:24:57 PM »

Normal way to get rusty pins back in is to a) clean em with emery cloth b) put some wax on them (candle wax is ok). They will go back in easily (i use a tack hammer). If the gasket causes the casing to misalign the holes you mean to gently press the casing to squish the gasket to get the holes to line up.
On the other hand if mangled means bent there is no way you should even think about re-using them.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My new (and a bit broken) Hohner 1040
« Reply #47 on: February 02, 2022, 10:35:58 PM »

Even straight pins that are rusty should be replaced with new.  They are not expensive.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: My new (and a bit broken) Hohner 1040
« Reply #48 on: February 02, 2022, 10:40:30 PM »

Reed wax failing is something that happens. It's happened to me. I lost three bass reeds once, after a hot day in the car. Used a soldering iron to wax them back in pretty easily. The hardest part was getting them in the right order and the right way round. Check the valves are secure while you're at it.

Have you discovered Lester's Hot Rod videos yet? Marvellous resource. They are based on the Hohner two row instruments,  but there are sufficient  information and skills demonstrated there that are transferable to the one row, to make it well worth checking them out.
https://sites.google.com/view/hohnerhotrod

It does sound as if the seller has tried to pull a bit of a fast one. I would definitely suggest you contact him, tell him what happened and ask for compensation to help pay for repair. Don't mention you might do it yourself. That's your business.

« Last Edit: February 02, 2022, 10:43:09 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #49 on: February 03, 2022, 07:19:30 AM »

Reed wax failing is something that happens. It's happened to me. I lost three bass reeds once, after a hot day in the car. Used a soldering iron to wax them back in pretty easily. The hardest part was getting them in the right order and the right way round. Check the valves are secure while you're at it.

Have you discovered Lester's Hot Rod videos yet? Marvellous resource. They are based on the Hohner two row instruments,  but there are sufficient  information and skills demonstrated there that are transferable to the one row, to make it well worth checking them out.
https://sites.google.com/view/hohnerhotrod

It does sound as if the seller has tried to pull a bit of a fast one. I would definitely suggest you contact him, tell him what happened and ask for compensation to help pay for repair. Don't mention you might do it yourself. That's your business.

I have initiated contact with the seller. They are defensive but that might be because they are expecting me to ask for a full refund. I have only asked them whether they were aware of the problem. They said they weren’t, however the listing clearly stated that all notes were clear. I’m looking for something around 25% of what I paid for the box, to cover the costs of getting the reed flipped and the postage…
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #50 on: February 03, 2022, 08:38:18 PM »

I just compared the inside of my box with pictures of others. It all looks a bit of a mess in there, with wax splodged all over the place. In itself I guess that’s just aesthetic but points to a generally bad job on the reedplates. Everything else about the box seems very good. Not sure what to do…
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: My new (and a bit broken) Hohner 1040
« Reply #51 on: February 03, 2022, 08:41:45 PM »

Post a picture.
Make sure the file size is small enough.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #52 on: February 03, 2022, 09:09:29 PM »

Post a picture.
Make sure the file size is small enough.

Ok, I'll have to find out how to make file smaller on phone...
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #53 on: February 03, 2022, 09:46:23 PM »

Turns out I have no idea how to do that either...

Well anyway, I'm just wrangling with the seller for a meager slither of compensation. I must say he manages to combine arrogance and feigned ignorance with utter finesse... The man has no scruples. I don't think I'll get far with him...
Logged
Dancing about architecture since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new (and a bit broken) Hohner 1040
« Reply #54 on: February 03, 2022, 09:55:33 PM »

If you bought it through eBay, just let them get on with it. They'll refund you and he'll pay for the postage to take it back. But maybe he'll see sense and offer a partial refund, which you can argue about if you're not happy with the amount.
Don't sweat about it!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #55 on: February 03, 2022, 10:13:17 PM »

If you bought it through eBay, just let them get on with it. They'll refund you and he'll pay for the postage to take it back. But maybe he'll see sense and offer a partial refund, which you can argue about if you're not happy with the amount.
Don't sweat about it!

The listing stated 'no returns', and although this doesn't count if the item is not as described, I imagine he would make the process very difficult. Seriously, I've only been asking for 20% of the selling price back!..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new (and a bit broken) Hohner 1040
« Reply #56 on: February 03, 2022, 10:29:51 PM »

Ok, I'm going to quit grouching now and do it myself. Next time I have a free couple of hours, the RH reeds are coming out. All of them, because there's a layer of strange powdery blackish rust on them. I'm pretty sure they're not the originals as they have plastic multi-layered valves...
Logged
Dancing about architecture since 1997

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: My new (and a bit broken) Hohner 1040
« Reply #57 on: February 03, 2022, 11:53:17 PM »

Post a picture.
Make sure the file size is small enough.

Ok, I'll have to find out how to make file smaller on phone...

I know how to do it on Android. If you google  "change picture size on an android" you get a bundle of ways, including these.

https://www.aiseesoft.com/tutorial/how-to-change-resolution-of-picture-on-android.html
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: My new (and a bit broken) Hohner 1040
« Reply #58 on: February 04, 2022, 07:39:28 AM »

If you can't find someone more local, Martyn White is a well-known fettler in Chelmsford.

https://melodeonrepairs.co.uk/

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: My new (and a bit broken) Hohner 1040
« Reply #59 on: February 04, 2022, 09:35:20 AM »

I would report him to eBay, and ask to return it, but, there is one factor which needs consideration, and that's the £50 you had to pay the couriers for duty and paperwork, which you won't get back. So as they say, it's between a rock, and a hard place. If I was closer, I'd help you sort it.

Regards

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso
Pages: 1 2 [3] 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal