Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Wax problem  (Read 809 times)

0 Members and 1 Guest are viewing this topic.

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Wax problem
« on: February 10, 2022, 05:22:35 PM »

Hello All, I just melted a lump of reed wax in my new melting pot, to use with my home-made waxong tool, and when molten it contained a dark redish stringy component which would not melt, even when I turned up the heat. I fished it out and threw it away. The remaining wax worked fine, but seems a little soft when hardened. Have I inadvertantly thrown away an important part of the wax? the resin perhaps?
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Wax problem
« Reply #1 on: February 10, 2022, 05:23:26 PM »

That should., of course, have been "waxing tool"
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wax problem
« Reply #2 on: February 10, 2022, 05:43:25 PM »

I've seen that when I've made my own wax.  It means the resin was not hot enough when the wax was added.  If it gets to that stage all you can do is to discard the gooey bits as you have done.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Wax problem
« Reply #3 on: February 10, 2022, 06:53:23 PM »

I've recently been given the recipe and supplies to make my own wax from a well-respected accordion technician in Quebec (who was retiring and, sadly, passed away a few months ago).  His claim was that Dino Baffeti used his recipe and process after he shared it with them years ago (there is obviously no way I can confirm this).  I haven't made my own yet as I'm still using up my previous supplies, but I've heard from several people that it is important to melt the rosin first, and only afterwards add wax, oil, etc.  Does anyone have any experience with this?
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wax problem
« Reply #4 on: February 10, 2022, 08:27:01 PM »

I've heard from several people that it is important to melt the rosin first, and only afterwards add wax, oil, etc.  Does anyone have any experience with this?

Yes I discovered this by trial and error.  Great care is needed in melting these materials as there is a fire risk.  I've tried using a water bath with the meting pot sitting in hot or boiling water.   I found this did not get hot enough to melt the rosin.  I now use a very large heavy aluminium pan on a gas  hob.  Melt the rosing slowly, once it is completely liquid add the wax a gradually so it doesn't cool the rosin too much.  Once all the wax has melted you should have a clear liquid, then add the oil, stir gently but thoroughly and pour into prepared moulds.

Don't use an iron pan - it reacts with beeswax and degrades the wax.  Likewise copper.  Don't allow tap water to come into contact with hot beeswax.  The minerals in tap water also react with beeswax and saponifies the wax.

I've made many kilos of reed wax like this, but now find it much more satisfactory to buy the ready made stuff from Carini.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Wax problem
« Reply #5 on: February 10, 2022, 09:28:15 PM »

Thank you, Theo - very informative and helpful.
Logged
C#/D player

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Wax problem
« Reply #6 on: February 11, 2022, 03:59:01 AM »


I've made many kilos of reed wax like this, but now find it much more satisfactory to buy the ready made stuff from Carini.

I can second that, though not having made kilos of stuff myself. I did try a few times at making some but for the price and ease of ordering pre made stuff from Carini it makes more sense for me.
Logged
Too many accordions, help!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Wax problem
« Reply #7 on: February 11, 2022, 06:54:57 AM »

Same here. I got the rosin and wax to combine by heating them separately, but even with various experiments with the rosin to wax ratio, I could never get the wax really sticky. And Carini's wax is pretty cheap. And for anyone who uses Charlie Marshall, a 'big up' for his wax sticks. I use them all the time for smaller repairs and partial revalves.
« Last Edit: February 11, 2022, 06:56:45 AM by RogerT »
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Wax problem
« Reply #8 on: February 12, 2022, 02:46:51 PM »

I remember Nils Nielsen telling me about his wax (the famous green stuff, for those who remember it -- I've still got a bit somewhere), I think it also had something unusual in it like carnauba wax. Whetever it was, it never seemed to crack or let go of the reed plates... ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal