Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Anyone know of this maker,Meinhold's ?  (Read 4075 times)

0 Members and 1 Guest are viewing this topic.

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Anyone know of this maker,Meinhold's ?
« on: February 13, 2022, 09:37:41 PM »

I just bought this old melodeon as a project to restore. I've restored, rebuilt, all kinds of things over the years but this will be a first. It was pretty cheap and I just love the look of it. I'm wondering if anyone can give me an idea of it's age, before 1900 or after? I'm going to have a million questions I'm sure but for now just a few. I got it Saturday and it's now in many pieces on the bench. There are only three pallets, three buttons are missing, the bellows are pretty much toast and the bass end frame and board the bass reeds sit on are now apart. I removed the bass box and will have to rebuild the pallets inside that. The treble pallets are  1 3/4" long, 11/16" wide and about 3/32" thick. Very thin, very worn, soft leather on them. At first I thought they were made of masonite but on close examination I believe it's cardboard. Question 1,I'm looking for suggestions on what to use to make new ones. If I use wood, (what's the best kind, should I use quarter sawn?) I'm concerned with shrinkage with them being so thin. I would want to seal top side after padding is glued to underside to create a moisture barrier, I would think. Question 2, The bellows are 1 1/8" wide, from fold to fold, no metal corners. A center frame about 3/8" thick with bellows on either side. There is a guy on Ebay, Bossetto Accordions, who sells bellows card stock one piece about 28" long, about 18 folds and 1 3/8" folds, could I use that on this Melodion? Even though it has 1/4" wider folds I thought it might still work. I'm going to need all kinds of things but will get to that as I progress. I want to get all the woodworking done first, the rebuilding of the box etc. before I start on the technical, mechanical stuff and reed issues. I believe it's in the key of C, having. Looking forward to working on this, it will be fun. I'm a retired carpenter/cabinetmaker and am always looking for good projects to keep me busy, this will be a good one. To be continued.  Tom       P.S,  Should I have posted this on Repairs etc.?   
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #1 on: February 13, 2022, 09:39:11 PM »

Two more photos
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone know of this maker,Meinhold's ?
« Reply #2 on: February 13, 2022, 11:12:55 PM »

The way the reeds are mounted is something new to me. On first sight it looks like a typical cheapo German box but the reeds are on individual plates that are fitted a little like traditional concertina reed shoes from the look of it. This might be a very good box!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #3 on: February 14, 2022, 12:59:38 AM »

Pete Dunk, I assumed it was what you said, a typical cheapo German box, but because it's a cheapo box is the reason I got it. I was firstly looking for a project, I don't care about how good an instrument it is, I just love the way it looks and was made and would like to restore it. It is also much different looking than all the other cheapo German boxes I've seen, which includes the way the reeds are mounted. I was also happy to see they are brass reeds because I like the sound of them. I play the English concertina which has steel accordion reeds and after hearing someone with an old brass reed instrument I just love the way they sound. My goal is to get this thing to play again, give it a second life so to speak. Your comment that it could be a very good box is encouraging, but I'm not holding my breath!! Let's hope we can say that for sure after I've finished with it.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Anyone know of this maker,Meinhold's ?
« Reply #4 on: February 14, 2022, 05:17:42 AM »

I've run across Meinholds occasionally; they were a budget brand in Klingenthal,and made both button and piano accordions. I don't know if they were the same Meinholds who made autoharps.
« Last Edit: February 14, 2022, 05:19:55 AM by Graham Spencer »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #5 on: February 14, 2022, 08:48:41 AM »

From accordion links.com

Meinel & Herold was a manufacturer of accordions from Klingenthal, Germany, founded in 1893. [MH] [WM]
W. L. Meinel was a manufacturer of accordions and concertinas from Untersachsenberg, Germany, founded in 1853. [MH]

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Anyone know of this maker,Meinhold's ?
« Reply #6 on: February 14, 2022, 11:33:10 AM »

From accordion links.com

Meinel & Herold was a manufacturer of accordions from Klingenthal, Germany, founded in 1893. [MH] [WM]
W. L. Meinel was a manufacturer of accordions and concertinas from Untersachsenberg, Germany, founded in 1853. [MH]

That was my first thought, "Meinhold" being a contraction of "Meinel & Herold";  but the "Meinhold" brand was apparently Moritz Meinhold of Klingenthal, a different firm (info also from accordionlinks.com!).
« Last Edit: February 14, 2022, 12:11:54 PM by Graham Spencer »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #7 on: February 14, 2022, 11:41:18 AM »

Interesting, thanks to all. Any idea as to when it was made? I'm guessing sometime after 1900. Regarding my reconstruction/restoration questions I'll start posting those over in Design, Construction, Repair.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #8 on: February 14, 2022, 01:29:52 PM »

The way the reeds are mounted is something new to me. On first sight it looks like a typical cheapo German box but the reeds are on individual plates that are fitted a little like traditional concertina reed shoes from the look of it. This might be a very good box!

Te reeds look very much like harmonium reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Anyone know of this maker,Meinhold's ?
« Reply #9 on: February 14, 2022, 03:51:22 PM »

reeds look very much like harmonium reeds.

My thoughts exactly. I made a quick search for Meinhold harmoniums, but found no match.
Logged
Semper idem, sed non eodem modo

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #10 on: February 14, 2022, 04:15:42 PM »

Though harmonium reeds usually have the rivet at the square/outboard end.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Anyone know of this maker,Meinhold's ?
« Reply #11 on: February 14, 2022, 04:25:49 PM »

Aren't harmonium reeds singles? Just suck or just blow?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #12 on: February 14, 2022, 05:05:06 PM »

That's right Pete.  The photo is very small, and I hadn't looked closely enough to see that these are in pairs.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #13 on: February 14, 2022, 05:41:59 PM »

Here are two closer images of the reeds. They are not what you are calling single I believe, because you can see the other side of the reeds through the pallet holes. Am I correct in assuming that?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #14 on: February 14, 2022, 06:28:21 PM »

That clarifies things, it’s a very elegant design.  Yes yours have a pair of reeds on each plate, one for press and one for draw. Harmonium reeds are similar in general shape. Harmoniums only have one direction of air flow so only need one reed per plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #15 on: February 14, 2022, 08:41:59 PM »

Thanks Theo, for all the great information.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone know of this maker,Meinhold's ?
« Reply #16 on: February 14, 2022, 09:20:53 PM »

I repeat. This is an unusual, possibly a very rare instrument. That doesn’t suggest that it’s particularly valuable, it may or may not be. It is certainly of interest to box nerds like me and no doubt many others on this forum. Please be very careful in the way you treat this box, it may just be a prototype, one of a kind and utterly unique. Again this doesn’t reflect any particular value but it is, seemingly, of historical value. I, for one, am exceedingly jealous!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Anyone know of this maker,Meinhold's ?
« Reply #17 on: February 14, 2022, 09:29:27 PM »

I repeat. This is an unusual, possibly a very rare instrument. That doesn’t suggest that it’s particularly valuable, it may or may not be. It is certainly of interest to box nerds like me and no doubt many others on this forum. Please be very careful in the way you treat this box, it may just be a prototype, one of a kind and utterly unique. Again this doesn’t reflect any particular value but it is, seemingly, of historical value. I, for one, am exceedingly jealous!

Seconded.
As a retired cabinet maker you presumably once worked with "hot glue". Hide glue is an effective adhesive for leather valves if you take the "traditional material" approach to restoration.
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #18 on: February 14, 2022, 09:50:47 PM »

Pete, You are making me nervous!! I completely understand what you are saying and I feel the same way. I don't care what it's worth, as I said I bought it as a project. I think now I need to assess what I'm going to do with it, restore it as best I can and keep everything original or restore and change things to make it a more usable instrument. We collect striking antique clocks and with those I only clean them and repair broken parts and clean the movement so they work, I try to keep all the signs of their life intact. The following pictures show things better than others I've sent. PEADAR, yes I have used hide glue for years on all antique that I have worked on, love that stuff. I buy the granular stuff you mix with water, but have also used the Titebond brand and like that as well. As you can see in the pictures the box has one stop, and when I saw what that stop knob looked like that's when I decided to buy that box!! It's just awesome!
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #19 on: February 14, 2022, 09:52:33 PM »

4 more pics
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal