Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Anyone know of this maker,Meinhold's ?  (Read 4102 times)

0 Members and 1 Guest are viewing this topic.

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #20 on: February 14, 2022, 09:59:25 PM »

As you can see the pallets are pretty thin, and I believe they are cardboard. I got the keyboard apart, pallet levers with the buttons on them. I would love to replace the three missing buttons with originals from another box, hopefully. The pallets i will have to make but was thinking of using wood unless I shouldn't if I'm trying to keep things original, not sure what to do now. I'm going to be asking some technical questions pretty soon but will post over on Repairs page.
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #21 on: February 15, 2022, 07:14:53 PM »

Before I move over to Design, Construction and Repair in order to ask repair/restore questions, it will be helpful for me to know how far I'm going to go with this Meinhold melodeon restoration. Meaning, should I restore it to stabilize the instrument in order to lessen deterioration, should I patch it up so it will play, should I modify things to make it better? I'm just curious to know what some of you, who I'm sure have been where I am, would do. My plan is to repair it so it will play again, to some degree, not necessarily for long periods of time either.  How far I go is going to depend on advise by others and on what is actually feasible. I believe that repairs on antiques should be visible and they become part of it's life story, so I'm not concerned with "patching" things. I want to try to keep most things as they are, if possible. I guess if it was an incredible, one of a kind and valuable instrument that should be in a museum then maybe I would have to leave it as it is, and hunt for another project. I'm going to be asking a lot of questions, some probably somewhat crazy, I plead ignorance on those!! I'm going to ask the first one now. Can I patch up the bellows? I just love the decorative papers on them and the maroon bellows tape and don't want to loose them. Can I re-enforce with cardboard where they have come apart from the inside? Can I put new leather gussets on the whole bellows from the inside and leave the original ones in place, even the torn ones?  Can I get matching bellows tape and go over old stuff where it's worn away? If I remove the gussets I will destroy the decorative papers on the outside of the bellows because the gussets are under them. In my overly positive opinion the cardboard the bellows are made of looks pretty good, obviously except where they have come apart, but that's because of failed leather gussets. Well that's it for now, thanks to all for all the good advise. Tom
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone know of this maker,Meinhold's ?
« Reply #22 on: February 15, 2022, 10:14:56 PM »

Pete, You are making me nervous!!


I’m sorry that wasn’t my intention, I just wanted to draw your attention to the unusual features and innovative design of the box. Bellows are always a consumable item and it’s not always practical to conserve them. Seeking out sympathetic paper designs and bellows tape is as much as we can do to retain a sympathetic restoration but from my point of view it’s more important that the instrument retains its primary function, to play music. Preserve what you can but remember that it was intended to play music to the delight of the musician.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Anyone know of this maker,Meinhold's ?
« Reply #23 on: February 15, 2022, 10:35:59 PM »

As you can see the pallets are pretty thin, and I believe they are cardboard. I got the keyboard apart, pallet levers with the buttons on them. I would love to replace the three missing buttons with originals from another box, hopefully. The pallets i will have to make but was thinking of using wood unless I shouldn't if I'm trying to keep things original, not sure what to do now. I'm going to be asking some technical questions pretty soon but will post over on Repairs page.

Given the direction this thread has already gone you could ask Theo (Admin) to move the topic over onto the repair page - That way the technical questions/answers will be part of the continuing (and hopefully supportive) discussion.

You are the OP (Originating Person?) so it's your call.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Anyone know of this maker,Meinhold's ?
« Reply #24 on: February 15, 2022, 10:43:10 PM »

You are the OP (Originating Person?) so it's your call.


I think OP means Original Poster.


Nitpicking of course, sorry about that.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #25 on: February 15, 2022, 10:55:10 PM »

I messaged Theo last night about moving it and he responded saying he thought he would leave it were it is. I'm getting to the point where I need to ask technical questions so I am going to start a new post over in Design, Construction and Repair. Tom
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #26 on: February 16, 2022, 09:40:30 AM »

Following on from Peters comment about bellows:  worn bellows are one of the hardest things to repair.  On instruments as old as yours it’s normally not possible to find matching materials for the exterior.  If the cardboard is beginning to split at folds that suggests that the material is degraded.  If you make repairs more splits are likely to develop with playing.  In Addison making many internal patches to bellows folds and gussets will make the bellows thicker in places when closed and stiffer.  If you were very lucky you might find a good set of secondhand bellows of the same size.  If you have to get new bellows the cost will make the project rather expensive.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #27 on: February 16, 2022, 12:03:24 PM »

Theo, I hear what you are saying and agree. I was just wondering if it's ever done, but with something so old I'm sure it will just keep deteriorating around repairs. I saw on Ebay cardboard cardstock bellows from Bossetto. I believe the folds are pretty close to the same size as my old one and I could get all I need from the one for my project. This is where I need help, am I buying the correct things? I would really like to try to make my own, of course ignorance is bliss I know but I'd like to make the attempt. I don't know what to get for gussets, size and thickness, and appropriate look for a restoration like this. I also want to change all the leather valves and don't know what to get there either. Some valves are thicker some thinner. I don't own a pair of metric calipers, yet, so don't know the MM of the old valves. Can one buy a pkg. of assorted sizes and just pick from that or do I need to measure all valves and order those sizes? Is it that important to be that accurate with valves or will "close enough" work? The bellows are going to be my biggest obstacle I think. I will also as you say see if I can find an old set that are the same size but I can't imagine that will be easy! I haven't looked but is there a classified/for sale section on this forum? If there is I can always ask there if anyone has something that will work. Thanks for the help. Tom
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Anyone know of this maker,Meinhold's ?
« Reply #28 on: February 16, 2022, 12:08:46 PM »

My first melodeon was a good example (as Peader would attest as he ended up with it!) the bellows eventually had more cereal packet than original cardboard.
I just kept scouring eBay for cheap old rubbish until I found one which looked the same size and type, then asked the seller for measurements before I bought it.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #29 on: February 16, 2022, 12:35:44 PM »

Valves are easy, you can buy ready made leather valves from Charlie Marshall at cgmmusical.co.uk.  Use the smallest size that will cover the vent, and trim to length with sharp scissors if necessary. 

Making your own bellows is possible but will challenge your skills!  There are youtube videos showing various methods.  Again you can get all the parts from Charlie.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Anyone know of this maker,Meinhold's ?
« Reply #30 on: February 16, 2022, 01:42:22 PM »

Valves are easy, you can buy ready made leather valves from Charlie Marshall at cgmmusical.co.uk.  Use the smallest size that will cover the vent, and trim to length with sharp scissors if necessary. 

Making your own bellows is possible but will challenge your skills!  There are youtube videos showing various methods.  Again you can get all the parts from Charlie.

great job
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #31 on: February 16, 2022, 02:00:34 PM »

Those are nice!! My melodeon has a center frame separating two bellows. Also it has no metal corners, just the tape which runs in one piece, corners mitered, with the end seam on the bottom. I'm thinking it may be easier for me because each separate bellows is smaller, that is if I attempt to make them. I'm also thinking that if I buy unfinished bellows that I have to cut to size and if they are wider, meaning the folds are wider, the only thing that would happen is the inside dimensions of the finished bellows would be smaller and probably not have any real effect on playing. I have a lot to do before I get to that and can be hunting for a used pair that fit in the meantime. Tom
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #32 on: February 16, 2022, 03:25:20 PM »

I have a lot to do before I get to that and can be hunting for a used pair that fit in the meantime. Tom

Post your measurements here and i (and probably others). will have a look for you.

Bellows without metal corners are a feature usually only found on very early instruments.  That, and the unusual reeds makes me think this is a 19th century, or very early 20th century instrument.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #33 on: February 16, 2022, 04:14:59 PM »

There are two bellows, each with four folds between a 3/8 +/-" thick frame. At the beginning of this post there is a picture of them. They measure 6 1/4" x 12 3/4". The frames they were glued to are 1/16" larger in both directions. Do you not include the half a fold that is glued to the frames when referring  to how many folds bellows are, or is it just assumed that there is a half that is used to attach them? It would be nice to find some bellows made the same way, with the center frame, and no metal corners,even though they may be newer. Not sure how far into the 20th century they were made that way.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #34 on: February 16, 2022, 07:59:17 PM »

I have some bellows that are 6 1/4" wide but 12 3/4" is very tall.   Most of the old ones I have are around 11"
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #35 on: February 16, 2022, 08:29:12 PM »

Thanks for looking Theo. Maybe I'll hear from someone else.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #36 on: February 18, 2022, 11:33:49 AM »

If you use Facebook it would be worth posting some photos on the Accordion Appraisal and sal page https://www.facebook.com/groups/accordionvalue

Look out for comments from Paul Groff or Stephen Chambers who are both very knowledgeable on older instruments.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #37 on: February 18, 2022, 01:36:46 PM »

Thanks Theo, I'll watch for Paul Groff and Stephen Chambers. We don't do Facebook anymore so that's out. I'm not in any rush on this project so even though it may take awhile I think I'll find parts I need.
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Anyone know of this maker,Meinhold's ?
« Reply #38 on: February 20, 2022, 01:58:37 PM »

Just thought I would post some pictures of my progress with this Meinhold melodeon. These are obviously the keys, before removal and then two shots of them out. The last is of the pallets.  Please correct me if I'm wrong in referring to them as keys. I'm sure every part has it's own name and I'm sure you all know what the things are without me telling you. I'm going to make new pallets probably out of quarter sawn mahogany. I showed Charlie Marshall the pallets and he wondered if they were replacements. The pallets for the Air and Basses are wood, somewhat quarter sawn and about 3/16" thick. There were only two in place, the others down inside the melodeon, and I remember the buttons were very high up out of the keyboard which made me think the originals were perhaps thicker.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anyone know of this maker,Meinhold's ?
« Reply #39 on: February 20, 2022, 02:05:00 PM »

Those pallets look ok, I’d just clean them up and use them. 
You can’t rely on button heights to tell you what was there originally because the wire part of the lever is easily bent.  In practice bending the wire lever is the way to adjust button height.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal