Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: circa 1900 Meinhold Melodeon Restoration  (Read 1489 times)

0 Members and 1 Guest are viewing this topic.

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
circa 1900 Meinhold Melodeon Restoration
« on: February 23, 2022, 02:57:03 PM »

I started this post over on Instrument Makes & Models and it soon turned to Repairs etc. It was suggested it be moved but Theo decided to leave it where it was. I have had no responses over the last three or four days to questions and I'm thinking it's because of where it is, so I'm moving it in hopes of more replies. I'm not going to re-post pictures here so if anyone wants to see them they are over on Instrument Makes and Model under "Anyone know this maker, Meinhold's?" With all that said, these are my last two questions with images.
1) The first picture is of the bass reed block, the larger one. There are two large single reeds, from left to right, then a double reed. The left reed is on the underside hence the leather valve on top. The second reed is on top so I thought there should be a leather valve on the underside, (see second picture), but there isn't. Should it be that way?  There seems to be evidence of glue where a valve would be.  If it had come off it would have been loose under the block when I removed it. It looks like the blocks were never removed since it was built, at least there is no evidence of them having been removed.
2) The third picture is of the board the treble end reed block is glued to, the fourth picture is of the reed block with the reeds still in it. If you look close you can see the shine of the old hide glue on the board, it is around the perimeter and all around the round holes. Is it necessary to glue it back on as it was (around the round holes) or will just gluing around the perimeter suffice?
Also the reed block was nailed with small brads from outside of board into the block at each corner.  I'm wondering if that is necessary for holding power although they will help as locators to get the block back where it was. I was thinking bolts would be good if it ever had to be remove, but then you would need to use gaskets and that would raise the block, and the slide for the stop holes would be too thin.
Thanks to all, Tom
Logged

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #1 on: February 23, 2022, 04:45:57 PM »

That's a really interesting design.

I am no expert but I suspect that the missing leather valve probably came off when the reed was removed at some point.  From what I can make out the reeds slide out (similar to concertina reeds) and the reed in question's valve will have caught on the lower face. I can't really see how the reed seals in the slots.  Is there some sort of gasket?  Anyway trying to slide that reed back in with a valve would have been problematic I suspect.  Now the block is off the valve should be replaced (as I say not an expert but that's what I would do . Also as below I also would consider gasketing)

The design is interesting as you have separate/opposed main bass reeds aka harmonium type.  You can even see the traditional curve at the tip.  Lovely design.  Then you have the harmonic as a double/opposed reed.  I take it they are steel reeds on brass plates or is there a mix?

Re the treble end .... its a dilemma.   Again the design is really interesting.  Opposed reeds but in a concertina style slot.  Again how to they seal?   and how do you remove and then replace with the valve?

As mentioned elsewhere for me the key thing with this is to get it playing well again.  If it were me I would make some compromises internally and concentrate on making  the sound and action perfect.  It needs to live again.  The outside should be celebrated for what it is and left with the marks of time.

I would not want to glue the treble reed block.  I think I would go for either using screws and a very low tack sealant (you do need to seal fully though so would want to do some experiments first) or I would gasket and screw (and adjust the slide).  A gasket would ensure a good seal and would be reversible.   Also I may be wrong but taking out and replacing the reeds will/may compromise the internal valves each time they are removed if the block is glued.  For me I would want to be able to work on those valves and reeds until they were perfectly tuned and fully balanced.  I would want them to be easily removable, valves accessible and tunable in the block (hence preference for gasket).

All that said .... these are just my thoughts.  I am no expert.  There are some great sources of knowledge on this forum.  So this post might at least create a debate.

Its a really interesting project .... It needs to live again.  In perfect tune.

John
« Last Edit: February 23, 2022, 04:55:54 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #2 on: February 23, 2022, 05:02:24 PM »

More in expert opinion here, I'm afraid. As for the treble end, I'd use wax as a a sealant between the boards. It's cheap, easy and (in my experience) doesn't damage the wood when separated, it also scrapes off easily for a new application if needed in the future.
The bass reeds should surely have valves on the back side of the reed slots. IIRC, harmoniums don't have valves at all, but I don't think they have any air flow from the back side to stop, either.
Lovely little job mind! It'll be good to see your progress, thanks.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #3 on: February 23, 2022, 06:19:22 PM »

Wax is a indeed good sealant but if you should ever need to glue the area then you are completely stuffed.  My recommendation would be to use a protein glue like hide glue or fish glue both of which are good sealants and can be reversed with warmth and moisture.  The original building of the instrument will have done with hide glue, so for any woodwork this will keep it authentic and the glue will be physically and chemically compatible with any traces of original glue.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #4 on: February 23, 2022, 06:35:15 PM »

Obviously, Theo speaks with the voice of years of experience and expertise.
 
However, in my inexpert capacity, I've tried many many times to separate components which have been stuck together with hide glue, but without success. I've tried heat and I've tried moisture, and I've tried both together following pretty precise instructions, but have always ended up with either warped or splintered bits of rubbish at the end of it!

Again, obviously; I must be doing something very wrong!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #5 on: February 23, 2022, 06:54:00 PM »

John,
There is a small piece of folded leather that was glued in the space under the reed plate to seal the gap. I have removed all the treble end reeds. I thought the same thing about peeling off the valves on the underside when the reed is pulled out of the slot. After I removed the folded leather gaskets I slipped a thin piece of stiff plastic in the gap being sure the valve on the underside was not bent and pulled the reed plate out, the valves all stayed on, I would image it will work in reverse when I re-valve and slide them back in again, then re-glue new folded leather gaskets in place. The reed plates are quite snug and I needed pliers to get a firm grip on them to remove. As you may be able to see there is a small indentation at the square end of the reed plate for a fingernail or tool to help in pulling them out, they wouldn't budge so I used smooth faced pliers.
Regarding attaching the reed block, my thoughts were also to gasket the block for ease of removal, but then I realized that the reeds are so easily removed with the method I used, that gluing may better to insure a good seal, and besides, even with the entire reed block off you still can't get at the underside of the reeds, you have to slide them out. My initial question is, if I glue it back on do I need to glue around all the round holes, or can I just glue the outer edge of the block? I should mention the block was glued and waxed in. If there is no seal (glue) around each of the round holes the pallets cover will there be over-tones from other reeds when the pallets are lifted while playing?
 Winston, as far as waxing in between the boards, that would also raise the block I fear and effect the thickness of the slide. I don't think I want to alter that to be honest. I'm trying to leave as much of this original as I can.
Yes I would use hide glue on this because it was used originally and I've used it for years on all kinds of antiques and have never had a problem especially in reversing it, if done carefully.
Thanks for solving my question about the missing valve on the bass reed, I thought there should be one there.
I also want this to "live again" as John said, and am trying not to alter much, the exterior especially. The bellows is going to be a problem. I am torn between making new bellows or preserving the old ones. I think it was Theo or Charlie Marshall that said he would have concerns with the integrity of the cardboard if new gussets were put on them, I think I am starting to agree with that. I'm working with a local printing company now to see if they can make new decorative papers for the bellows using photos of the originals, we'll see what happens. I know I'll have a lot more questions and greatly appreciate all the help and advise. Tom
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #6 on: February 23, 2022, 07:04:04 PM »

Photo of reeds before removal. This is actually a bass reed which I have not yet removed from the block, all the treble reeds are out and cleaned.
Logged

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #7 on: February 23, 2022, 08:36:07 PM »

do I need to glue around all the round holes,[/i] or can I just glue the outer edge of the block? I should mention the block was glued and waxed in. If there is no seal (glue) around each of the round holes the pallets cover will there be over-tones from other reeds when the pallets are lifted while playing?
  Hi Tom,  I now understand now how the individual reeds are sealed.  Thanks.
Re the above (block sealing) it very much depends on how well the surfaces match.  I suspect that you will have to seal around each hole. Its a nice working arrangement and the objective is to get as good a seal as you can on each note.  Its amazing how responsive and rich the sound can be once its really fully sealed and tuned properly  (:)    All of the arrangements I have seen are designed to fully seal against leakage/crossover.

Not an expert though ......... I personally would fully seal though one way or another …. I must admit though .. I prefer gaskets …. It’s the engineer in me  (:)

Hope this helps.

John
« Last Edit: February 23, 2022, 08:50:59 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #8 on: February 23, 2022, 09:06:46 PM »

John, Yes it helps a lot. Thank you very much. I understand what you say about the tighter everything is sealed the better, and will sound better too. Less air going places under the board and around holes that are not being played the better! The flatter the two surfaces being glued will make for a better seal. The reed board, before removal, had a very bad curve to it, the glue around the holes had let go and only the glue on the ends of the reed block were still stuck.  After I removed it it broke in half where there was a big split, I expected that would happen, but then I dropped it and the narrow end broke as well!! Yikes!! It's good as new now, all glued back together and it's also flat so getting it glued and air tight should be much easier.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #9 on: February 24, 2022, 08:15:22 AM »


Again, obviously; I must be doing something very wrong!

You are Winston dear boy. You’re not giving it enough time. Cover the part you want to remove with paste, make sure it stays moist. This could take a day or more then you should be able to gently remove the offending glue and part. The spines of books can take several hours to scrape clean.
 (Typed with great difficulty due to broken dominant arm)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #10 on: February 24, 2022, 08:26:54 AM »

You're right there, Old Nick (Haha!), I don't leave it as long as that. But I have tried leaving it a bit of a longer time, and if it's plywood it begins to delaminate, and old wood goes soft and misshapen! I cannot win! But let us not hi-jack the thread!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #11 on: February 25, 2022, 05:57:59 PM »

I've been browsing old posts here about reed tuning and adjustment etc. I'm starting to wonder if I should have someone balance and tune the reeds before I put them back in the reed block and before I valve them. If I had that done would the valves be removed to do it? If yes, then would I just not bother to re-valve but have the tuner install new valves? I would have to take it to the Button Box out in Sunderland, about 1 1/2 hrs. from me. I don't know yet what the cost would be and whether or not I could afford that now. On the other hand I would imagine that if the restoration was complete and I decided to have it tuned they could do it without too much difficulty, especially because there is no need to wax the reed plates in, just need to glue in the little leather gasket under the ends of the plates. I guess what I really would like opinions on is whether I should complete the restoration, which would include the new bellows build ? I could then get it out to The Button Box for a tune-up.
One more question I could really use opinions on. What to make 6 more pallets out of? The originals are thin, very rigid cardboard. Theo said I should just clean them up and use them, which I will do to preserve some of it's original parts. I don't want to use plastics, trying to keep this as authentic as I can. I'm a woodworker so woods my first choice but I'm concerned about the wood being so thin, the originals are 1/16" thick. Quarter sawn would be the way to go but am still concerned about them staying flat. Is metal (aluminum) an option?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #12 on: February 25, 2022, 06:05:21 PM »

A reed will sound a different pitch with or without valves, and will also sound a different pitch when fitted or when taken out.  Therefore final tuning must be done after fitting valves, and with the reeds in situ. Sometimes it is helpful to do a pre-tuning to get the pitch approximately correct.  This may look difficult, but accordion tuners do this all the time and have tools that enable access to the reeds to remove tiny amounts of metal to adjust the pitch while the valves are in place and the reeds are mounted in the instrument.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #13 on: February 25, 2022, 06:18:55 PM »

I've been browsing old posts here about reed tuning and adjustment etc. I'm starting to wonder if I should have someone balance and tune the reeds before I put them back in the reed block and before I valve them. If I had that done would the valves be removed to do it? If yes, then would I just not bother to re-valve but have the tuner install new valves? I would have to take it to the Button Box out in Sunderland, about 1 1/2 hrs. from me. I don't know yet what the cost would be and whether or not I could afford that now. On the other hand I would imagine that if the restoration was complete and I decided to have it tuned they could do it without too much difficulty, especially because there is no need to wax the reed plates in, just need to glue in the little leather gasket under the ends of the plates. I guess what I really would like opinions on is whether I should complete the restoration, which would include the new bellows build ? I could then get it out to The Button Box for a tune-up.
One more question I could really use opinions on. What to make 6 more pallets out of? The originals are thin, very rigid cardboard. Theo said I should just clean them up and use them, which I will do to preserve some of it's original parts. I don't want to use plastics, trying to keep this as authentic as I can. I'm a woodworker so woods my first choice but I'm concerned about the wood being so thin, the originals are 1/16" thick. Quarter sawn would be the way to go but am still concerned about them staying flat. Is metal (aluminum) an option?
I don't know if it is available in the states, but in the UK there is such a thing as "model aircraft ply". This is a fine graded plywood approximately 1/16 inch thick. It is sold by (strangely enough) model shops and comes in quite small sheets ( 1 foot x 2 foot ??) . I used to use it for making model railway vans. I suspect it would have the mechanical properties you need.
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #14 on: February 25, 2022, 07:00:01 PM »

Thank you Peadar, I will look into that. It's funny I was just thinking before I checked back in here whether or not I could laminate some thin wood to make a stable pallet. I had ruled out plywood, knowing the thinnest I know of is 1/4". Thanks again.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #15 on: February 25, 2022, 07:14:45 PM »


Thank you Peadar, I will look into that. It's funny I was just thinking before I checked back in here whether or not I could laminate some thin wood to make a stable pallet. I had ruled out plywood, knowing the thinnest I know of is 1/4". Thanks again.

If you go to modelling shops you can get ply down to 0.8mm
https://modelshop.co.uk/Shop/Raw-Materials/Wood-Sheet/Item/Plywood-304-912mm/ITM4006

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #16 on: February 25, 2022, 08:03:30 PM »

Just found some. Birch 3 ply, 1/32" and up. The original pallets are 1/16" but I'm thinking of using 3/32" thinking they may stay flat after leather is glued on. I've emailed the supplier and asked about stability. If I need to I will seal the top side with shellac to keep it from warping.
Logged

Thomas Barnatt

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: circa 1900 Meinhold Melodeon Restoration
« Reply #17 on: February 26, 2022, 11:49:00 AM »

Theo, Thanks, I guess that means to keep moving forward and finish the whole project, it makes sense. When it's all done I'll venture out to Button Box and see what they can do for the old box.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal