Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Pre Corso bellows size  (Read 1119 times)

0 Members and 1 Guest are viewing this topic.

ProperTing

  • Member
  • *
  • Offline Offline
  • Posts: 37
Hohner Pre Corso bellows size
« on: February 27, 2022, 08:24:37 PM »

I bought a Pre Corso off ebay. Bellows look to be in hard shape so I plan on fitting a new set of Italian bellows to the frames. Where it’s a couple months for turn around, I’m looking to get my bellows order in asap. Anyone know if the bellows size, for the pre Corso, is the same as the later model Corso (310mm x 190mm)? TIA
Logged
Pariselle, Paolo Soprani & Hohner

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner Pre Corso bellows size
« Reply #1 on: February 27, 2022, 09:16:59 PM »

The size is the same but the Pre-Corso has corners that are more rounded.  Corso bellows on a Pre-Corso would stick out at the 4 corners.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Pre Corso bellows size
« Reply #2 on: February 27, 2022, 10:00:58 PM »

If you want Italian bellows just take measurements from your old bellows.  The two main makers are Marconi or Galassi,  both have websites with details of the measurements you need. Carini also supply bellows, but I don’t know if they make them or have them made.  You can expect to wait 6 to 8 weeks from ordering.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

ProperTing

  • Member
  • *
  • Offline Offline
  • Posts: 37
Re: Hohner Pre Corso bellows size
« Reply #3 on: February 27, 2022, 11:06:11 PM »

Thanks a million for all your help! I’m getting the bellows from Carini. Carini has multiple different types of corners. If you could make a guess, which corner is most similar to the original bellows (see attachments)?
Logged
Pariselle, Paolo Soprani & Hohner

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner Pre Corso bellows size
« Reply #4 on: February 28, 2022, 12:04:49 AM »

You need to get a piece of graph paper to determine the size of your corner (I.e. the radius and how far the corner extends). Then compare with the Carini images to determine which is the matching corner. I cut an L shaped bit of graph paper and trace around the corner with a pencil.
« Last Edit: February 28, 2022, 12:07:22 AM by RogerT »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal