Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: My new Hohner 1040 Part 2: Left Hand bass not speaking  (Read 1561 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
My new Hohner 1040 Part 2: Left Hand bass not speaking
« on: March 02, 2022, 09:59:24 PM »

Hello,

So I got the upside down reed flipped. Ok. I now turn my attention to the left hand, and sadly here too I run into some problems...

(Please listen to attached audio with headphones if you can, to get the bass frequencies.)

Focusing on just the bass notes:

The push C sounds great and growling away happily with higher octave reed chiming along nicely.

Pull G - trouble. The lower octave isn't there. I pull a little harder. Still not there. Harder still. It kind of creeps in reluctantly.

Push F. Where's the high octave? I can't hear it, maybe it's so in tune that it's masked by lower reed?.. Pull F - both low and high reeds perfect...

I play the notes staccato since that is how they would normally be played. The low G simply isn't there, unless I play hard.

Would any of you be able to make a diagnosis?..

Edit: the audio file wouldn't fit, I'll have to make one more brief...
 
Many thanks,

Arnold
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #1 on: March 02, 2022, 10:04:28 PM »

Here's the shorter edit, should be clear enough. Try to ignore the noisy keys, I'm working on that! ..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #2 on: March 02, 2022, 10:09:46 PM »

Here are the 4 notes played as a slowish crescendo-ish... C, G, F (push), F (pull)
Logged
Dancing about architecture since 1997

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #3 on: March 02, 2022, 10:15:05 PM »

I'm not an expert, but usually sluggish bass notes have to do with the reed gap. If it is too small the reed will be slow to start, and I think if it's too large the reed will simply not sound at all.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #4 on: March 02, 2022, 10:19:39 PM »

I'm not an expert, but usually sluggish bass notes have to do with the reed gap. If it is too small the reed will be slow to start, and I think if it's too large the reed will simply not sound at all.

Thanks. Yes, I thought it might be that as I had the same thing with harmonicas, but I'm more hesitant to prod this around so wanted to be sure. Also, I think this has steel reeds rather than brass so may need to be treated differently?..
Logged
Dancing about architecture since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #5 on: March 03, 2022, 07:14:39 AM »

Neither am I an expert, but the reed gaps are important. Too big and you might get a hissing sound before the note sounds, and too small and you may not get any sound at all.
There's no need to be frightened to give them a bit of a twang and see how big a gap there is, they're pretty robust. Just don't bend them right back on themselves.
Also, if the hidden valves a have come off, or are too far curled, that could have a major effect on performance.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #6 on: March 03, 2022, 01:13:18 PM »

Neither am I an expert, but the reed gaps are important. Too big and you might get a hissing sound before the note sounds, and too small and you may not get any sound at all.
There's no need to be frightened to give them a bit of a twang and see how big a gap there is, they're pretty robust. Just don't bend them right back on themselves.
Also, if the hidden valves a have come off, or are too far curled, that could have a major effect on performance.

Ah, yes thanks for that. Unfortunately, the reed blocks are flat mounted and I think the G pull reeds are on the inside, making them particularly difficult to get to. This is perhaps not as straightforward as it would at first appear…
Logged
Dancing about architecture since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #7 on: March 03, 2022, 01:55:55 PM »

OK, all you need to do is to run a scalpel or Stanley blade through the wax around the reedplate and prise it out. Going back in the same place in the left-over wax, then heat up a spoon or something (if you don't have an electric soldering iron) to melt the wax back over.
Job done! If a dummy like me can manage it, anyone can.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #8 on: March 03, 2022, 02:24:03 PM »

OK, all you need to do is to run a scalpel or Stanley blade through the wax around the reedplate and prise it out. Going back in the same place in the left-over wax, then heat up a spoon or something (if you don't have an electric soldering iron) to melt the wax back over.
Job done! If a dummy like me can manage it, anyone can.

Hmm, ok, thanks, and then if it’s not right I would have to keep repeating the process until the reed responded correctly?.. Is there a way to calculate if the gap is correct before going through this process repeatedly?..
Logged
Dancing about architecture since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #9 on: March 03, 2022, 03:37:17 PM »

I've seen it suggested on here that the gap should be approximately one and a half times the thickness of the tongue. But it is really a case of trial and error for us amateurs, I think.
Sometimes, I've held the reedplate in the crock of my thumb and forefinger and just blown through it to make it sound, but it's not always possible, and it's never really scientific, lol.
You can make sure that there is an actual gap, though, maybe you could use a feeler gauge to check? (10 to 15 thou might be a good start and maybe 20 for the big reeds?) Although there is certainly a "sweet spot", so to speak, it doesn't need to be exact to sound half decent.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #10 on: March 03, 2022, 03:48:03 PM »

I've seen it suggested on here that the gap should be approximately one and a half times the thickness of the tongue. But it is really a case of trial and error for us amateurs, I think.
Sometimes, I've held the reedplate in the crock of my thumb and forefinger and just blown through it to make it sound, but it's not always possible, and it's never really scientific, lol.
You can make sure that there is an actual gap, though, maybe you could use a feeler gauge to check? (10 to 15 thou might be a good start and maybe 20 for the big reeds?) Although there is certainly a "sweet spot", so to speak, it doesn't need to be exact to sound half decent.

Ok, I’m unfamiliar with specialist tools such as feeler gauges. I think I’ll just have to lift the reed out and have a look. What would I use to bend the reed towards the normal, and how far down the length of the reed should I push etc?.. thanks for your advice!..

Logged
Dancing about architecture since 1997

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #11 on: March 03, 2022, 04:30:24 PM »

Arnold, check out Lester's video on tuning: https://www.youtube.com/watch?v=xy8dizq8Tks

Starting at about 5:45 he demonstrates diagnosing a reed gap problem and how to fix it.

All of his videos in this series (https://sites.google.com/view/hohnerhotrod) are great to watch. He's demonstrating on a Pokerwork, but all of it will apply to your 1040.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #12 on: March 03, 2022, 04:41:20 PM »

Jesse has pointed you to a professional demonstration. What could be better?
Just have fun!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #13 on: March 03, 2022, 04:51:23 PM »

Jesse has pointed you to a professional demonstration. What could be better?
Just have fun!

Well to quote Rodger Moore: “We all get our jollies one way or another”!..  :D
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #14 on: March 03, 2022, 08:11:31 PM »

Alas! Thanks for all the helpful advice but unfortunately I've decided that I''m going to have to cut the melodeon loose.

It's not just re-gapping the reed.

I would still need to fine tune it - initially I thought I would be able to do this myself but then I assumed the reeds would be brass (I think my harmonica tuning kit is only adequate for brass) and it never occurred to me that the reeds would be flat mounted  (why on Earth would they be?..) making the whole process somewhat more difficult. I did set some money aside in case I needed to get this done by a professional but that was swallowed up by parcel force import tax and sending to get reed flipped.

I would also then probably need to restrict the button movement (again, I dont understand why it was designed like this) and fit a strap too...

Yes, I could have done more research but I didn't think I was setting the bar too high, the only other melodeon I have ever even held is a £30 Scarlatti 'toy'!..

My plan initially was simple and I think reasonably sensible: Find and purchase a melodeon for a certain price that was simply 'playable', set another half again aside for extra work a few months down the line. Well, unfortunately 2 months later I still don't have a melodeon that is even at the 'playable' stage (Edit: it is playable if I play loudly but that is not an option when I get to play in the evening)

It's going in the 'buy and sell' as soon as I can put together some demonstration audio and pics with a low enough pixel count. With a little work it will make a very attractive and playable instrument for someone...
« Last Edit: March 03, 2022, 09:12:53 PM by Arnold »
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #15 on: March 03, 2022, 08:48:45 PM »

You don’t need to reduce the pixel count do much as to use a format that allows some compression eg jpg.  That way you can keep pictures a decent size.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #16 on: March 03, 2022, 09:14:19 PM »

You don’t need to reduce the pixel count do much as to use a format that allows some compression eg jpg.  That way you can keep pictures a decent size.

Thanks, I’ll figure it out I think. iPhone just kind of likes to do things its own way or no way without some app or other…
Logged
Dancing about architecture since 1997

Scobarandbar

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #17 on: March 03, 2022, 09:26:05 PM »

When you take a picture on an iPhone and get to the very point of sending it (email etc.) you will get an option to reduce the size of the photograph.  That's how I have always done it when posting pics on here.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #18 on: March 03, 2022, 09:30:21 PM »

When you take a picture on an iPhone and get to the very point of sending it (email etc.) you will get an option to reduce the size of the photograph.  That's how I have always done it when posting pics on here.

Ok I’ll try that. I don’t remember that happening before when I tried to attach a photo here on the first thread but maybe I need to take photo ‘live’… Anyway, still got to sort out audio too. Can only happen next time I have the house to myself and able to make a noise anyway!..
Logged
Dancing about architecture since 1997

Scobarandbar

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: My new Hohner 1040 Part 2: Left Hand bass not speaking
« Reply #19 on: March 03, 2022, 09:46:50 PM »

Reducing the file size of a photo may only work if you are sending the photo directly from your photos library on your iPhone. 

Perhaps you could reduce the size on your phone and email them to yourself and they will then be nicely reduced copies for adding as an attachment once you insert the image on your post. 

I keep the originals as well just in case someone asks for me to email them at full res.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal