Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning questions  (Read 1031 times)

0 Members and 1 Guest are viewing this topic.

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Tuning questions
« on: March 03, 2022, 10:36:17 PM »

My feelings about my melodeon's "in tuneness" seem to vary with my mood. I must have been in a particularly bad mood the other day, because I downloaded Bill Farmer's Tuner app and, exactly as I expected, it only increased my anxiety about everything. So I have a bunch of questions.

Just about every reed in the M blocks is between 2 and 5 cents sharp. For example, my D row 5th button push (A4) is about 3.3 cents sharp of 440Hz on the M reed and 18.4 cents sharp on the M+ reed. If I understand it right, the perceived pitch is therefore right in the middle of that range, or 12.5 cents sharp. This is enough for me to detect the sharpness compared to the A440 on my metronome (which the Tuner app puts at 0.62 cents flat). If I play the melodeon A alongside the metronome's beep, it definitely sounds sour.

But, when I put on John Kirkpatrick's Duck Race CD and listened to the melodeon on those tracks, my melodeon sounds in tune with his. So let's assume (with no actual evidence) that his tremolo is the same width as mine, and his melodeon is tuned perfectly to A440. That means his A would sound at a perceived 9.2 cents sharp. That is only 3.3 cents away from mine, and evidently my ear cannot detect a difference of 3.3 cents (one rule of thumb I read says most people can detect "a nickel's worth" or 5 cents of difference.

So maybe it doesn't matter that my melodeon is sharp?? I imagine I would be able to detect the difference between a perfectly tuned melodeon and the metronome tone; that is just inherent in the MM+ tuning system. And I guess the tremolo spread generally gets narrower as the reeds get higher, in order to maintain a reasonable tremolo frequency. So the impact of being a little extra sharp is greatest at the lowest notes (and it is the lowest notes that a perceived the most as being sharp from the actual pitch - A4 sounds sharp of the metronome but A5 sounds OK to me).

So when tuning a melodeon, how close do you get the reeds? Is within 5 cents "close enough"? Or do you really try to get it down to 0 (or at least within 1 cent)?

Do melodeons drift sharp over time? I've been playing this just about every day for about 16 months. Do the reeds just settle in over time and change pitch? Are the reeds affected by temperature and humidity fluctuations as the heat goes on and off? Or is this probably how it came to me?

Is it relatively simple to "spot fix" reeds by a few cents in situ, using the melodeon itself to sound the reeds? I don't have a tuning table setup and I'm not sure how likely I am to make that project happen. I will practice on my project box (which I rarely play because the bellows are leaky) first, of course.

Or maybe if it doesn't sound noticeably out of tune with itself, I should just leave well enough alone. I knew I shouldn't have downloaded the tuner app! ::)
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning questions
« Reply #1 on: March 03, 2022, 10:45:55 PM »

A lot of questions they, so I’ll be selective in answering some points. (Background I work as a tuner and repairer)
When doing the final tuning I always tune the reeds with the blocks fitted and use the instruments own bellows to sound the reeds. 
My aim is to get every reed to never be below the target pitch and not more than 0.5 cent above. This does require careful control of bellows pressure.  If you are aiming for a wet tuning you can make the tolerance a little wider.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tuning questions
« Reply #2 on: March 03, 2022, 10:49:26 PM »

According to the calculator here 3 cents sharp at 440Hz is 440.84Hz, not sure that is detectable by the human ear.

When tuning I aim to get as close as possible to ideal but on a melodeon the difference between the two reeds is far more important and far easier to detect errors on by ear.

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Tuning questions
« Reply #3 on: March 03, 2022, 10:55:19 PM »

A lot of questions they, so I’ll be selective in answering some points. (Background I work as a tuner and repairer)
When doing the final tuning I always tune the reeds with the blocks fitted and use the instruments own bellows to sound the reeds. 
My aim is to get every reed to never be below the target pitch and not more than 0.5 cent above. This does require careful control of bellows pressure.  If you are aiming for a wet tuning you can make the tolerance a little wider.

I find it quite difficult to get a stable reading on the bass reeds.

Do the reeds go sharp when you put when back in the instrument? Or is it unpredictable?
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Tuning questions
« Reply #4 on: March 03, 2022, 10:57:12 PM »



I’m evidently not a melodeon expert but more broadly fairly knowledgeable with regards music, tuning etc.

Around 12 cents sharp is equivalent to A=443Hz which is quite normal in recent years with the standard pitch for many instruments, particularly wind, creeping up (usually it’s 442Hz) for I don’t know reasons (usually the ones given are to sound ‘brighter’ which seems daft). My Hohner melodicas are typically around 443Hz and I tune them down just to 442Hz to allow for a little extra tempering of notes (that’s another topic). Even then notes tend to fluctuate with temperature, pressure etc. So you can drive yourself mad fine tuning etc if you are not tolerant of imperfections (leading nicely to your final point!). Regarding the variation of out of tuneness between octaves, that will be covered elsewhere here on discussions about Dedic tuning…
« Last Edit: March 03, 2022, 11:03:41 PM by Arnold »
Logged
Dancing about architecture since 1997

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Tuning questions
« Reply #5 on: March 03, 2022, 11:27:42 PM »

The history of pitch standards is an arms race between instrumentalists (who wanted a brighter sound to cut through the echoes of large symphony and opera halls, and singers, who are biologically limited in just how much higher they can go. It was finally settled (for a few years) by a clause in the Treaty of Versailles. (Which I find hysterically funny, the idea that World War I might have been prolonged by intransigent musicians.)
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Tuning questions
« Reply #6 on: March 04, 2022, 08:21:20 AM »

The history of pitch standards is an arms race between instrumentalists (who wanted a brighter sound to cut through the echoes of large symphony and opera halls, and singers, who are biologically limited in just how much higher they can go. It was finally settled (for a few years) by a clause in the Treaty of Versailles. (Which I find hysterically funny, the idea that World War I might have been prolonged by intransigent musicians.)

It’s kind of like the pitch equivalent of Spinal Tap’s 11 being “One louder”!  :D So it was agreed in the treaty that the standard would be A=440Hz and so basically music instrument manufacturers are operating in contravention of international law?!..
Logged
Dancing about architecture since 1997

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Tuning questions
« Reply #7 on: March 05, 2022, 04:36:02 AM »

I havent done much tuning but think your 3 cents sharp and 18 is really only 3 cents sharp of a normal M0 M+ tuning. It will sound sharp of 440 but will be tuned this way and this is a normal tuning. My M- M+ boxes are tuned to sound in at 440 but often sound flat in sessions especially playing with flute players, but they will always play sharp of wherever you are.

Theo’s rules for his own tuning are a pro’s tolerance. I only get to within a cent usually, then adjust anything that sounds out. I still have not got to grips with keeping them in tune though, weather and settling often send them out and i end up spot retuning after a major retune on old reeds not used for a while or repitching. Being a hobbyist, i dont think i will ever get to knowing tuning like the people that do it every day, but it is interesting to me and i have a good sounding box out of it.

Note i also tune my personal boxes quarter comma meantone, anyone tuning reasonably dry may be not tuning in equal temperament, so some of the reeds will be expected to be out of equal temperament and it will be more than 3 cents. Anyone taking my boxes in for a spot tune would be spoiling them by putting back to equal temperament. This tuning will work for home keys but playing along with singing in b or eflat for example does not sound great when i have tuned to meantone home key of d.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Tuning questions
« Reply #8 on: March 05, 2022, 08:37:18 AM »


Note i also tune my personal boxes quarter comma meantone, anyone tuning reasonably dry may be not tuning in equal temperament, so some of the reeds will be expected to be out of equal temperament and it will be more than 3 cents. Anyone taking my boxes in for a spot tune would be spoiling them by putting back to equal temperament. This tuning will work for home keys but playing along with singing in b or eflat for example does not sound great when i have tuned to meantone home key of d.

Interesting. I have decided to keep my box rather than basically give it away so now I'm thinking about exactly how I want it tuned etc. I play some baroque keyboards and used to play harmonica so temperament is something I've dealt with to some extent previously. A couple of questions:

Have you ever tried 1/5 comma meantone? 1/4 comma gives pure major 3rd which are nice but overshoots the leading note (-16 cents rather than -12 cents relative to equal temperament). 1/5 comma compromises the just intoned major 3rd slightly but gives a pure leading note. I suppose to me it makes more sense on a melodic level and is a slightly better compromise when playing with other instruments. This is of course based on theory rather than experience but I once got in trouble with a producer for having an 'out of tune' synth (I had it set to Werckmeister temperament!)

Second question: does anyone know how melodeons were traditionally tuned? I'm mainly thinking of the one-row type... thanks

Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning questions
« Reply #9 on: March 05, 2022, 09:26:36 AM »

With a push pull instrument you have an extra degree of freedom because not all combinations of notes can be played together. Paul Groff told me about a tuning scheme to take advantage of this that gets you just intonation on all push intervals and on on all pull intervals.  I’ll dig out the details.  Some old German one row boxes are tuned like this, and modern Cajun one row boxes are tuned in an approximation to this.  Pretty much all modern boxes are ET.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Tuning questions
« Reply #10 on: March 05, 2022, 10:51:16 AM »

With a push pull instrument you have an extra degree of freedom because not all combinations of notes can be played together. Paul Groff told me about a tuning scheme to take advantage of this that gets you just intonation on all push intervals and on on all pull intervals.  I’ll dig out the details.  Some old German one row boxes are tuned like this, and modern Cajun one row boxes are tuned in an approximation to this.  Pretty much all modern boxes are ET.

My guess was the old 2-chord boxes would have been tuned the same as old Harmonicas, with the F note (on a C box) tuned as a harmonic 7th for the G pull chord, which is some what lower than equal temperament and therefore not very useful with any other chord e.g D minor or F major (the just tuned F a 5th below C would only be very slightly lower than in ET). Probably looks something like this on a C box (deviation in cents). Push: C(0) E(-14) G(+2), pull: D(+4), F(-31), A(+6), B(-12).

Possibly then, the best compromise for slightly sweeter chords without sacrificing the ability to play in tune with others, would be some kind of meantone ‘light’ temperament. Although of course a well tuned box in ET is perfectly fine too (As a Harmonica player Just intonation becomes a little more desirable due to the squeakiness!)
« Last Edit: March 05, 2022, 10:53:29 AM by Arnold »
Logged
Dancing about architecture since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal