Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Club Model 1  (Read 728 times)

0 Members and 1 Guest are viewing this topic.

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Hohner Club Model 1
« on: March 23, 2022, 08:34:05 PM »

I have acquired this and the push side of the C row is silent. I am hoping that the reeds haven’t been harvested. I don’t quite know at the moment how to ‘open the box’ as the usual 4 pin release does not seem to apply. I am sure it it simple, either a long screw or bolt but someone may know.
Michael
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Hohner Club Model 1
« Reply #1 on: March 23, 2022, 08:50:33 PM »

Take the grille off, and you will find a block either side, with a screw in the middle. Undo that screw, same both sides.

Nice boxes, you might find that the block has moved, and jammed somewhere

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Re: Hohner Club Model 1
« Reply #2 on: March 23, 2022, 09:11:30 PM »

Thanks, I suspected that, but didn’t want to muck about. Thanks for that.
As to being a ‘nice box’ , I think Theo likes these too.
« Last Edit: March 23, 2022, 09:42:24 PM by Michael Driscoll »
Logged

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Hohner Club Model 1
« Reply #3 on: March 24, 2022, 03:10:25 PM »

Pull and push are on the same reed plate so if you have a sound on pull then the push reeds should be there.

I’m intrigued to know what the problem is.  Reeds restricted in some way is the only thing I can think of. That or a loose block.

It’s always worth making sure each of the two screws mentioned go back in the same thread btw.  Depends on the box but length varies on some from memory.

These are lovely boxes.  Great to work on.

John
« Last Edit: March 24, 2022, 03:36:41 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Hohner Club Model 1
« Reply #4 on: March 24, 2022, 04:10:24 PM »

Not sure if this helps but here is a picture of the end removed.

You can see one of the little brackets on the right of the open bellows frame.  The two screws (under grill) go through the end box and into these brackets.  Takes about 5 mins to open up. The grill just opens up by turning the round key screws to release through slots or just completely unscrew.

John
« Last Edit: March 24, 2022, 04:17:16 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Re: Hohner Club Model 1
« Reply #5 on: March 25, 2022, 01:27:44 PM »

Opened up. The problem is a broken c row Reed block, damaged in transit - a wood glue job to fix.
Michael
Logged

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Hohner Club Model 1
« Reply #6 on: March 25, 2022, 02:37:16 PM »

Opened up. The problem is a broken c row Reed block, damaged in transit - a wood glue job to fix.
Michael

Pleased to hear the reeds are OK.  The blocks are pretty “adjustable” … good quality wood which helps.
Sounds like a bit of PVA should sort.

John
« Last Edit: March 25, 2022, 02:51:59 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Re: Hohner Club Model 1
« Reply #7 on: March 26, 2022, 12:21:12 AM »

Thanks, John
I’ve now been elevated from ‘good talker’ to ‘regular debater’ after all these years. life is good!
Michael
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal