Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: How reeds work?  (Read 2234 times)

0 Members and 1 Guest are viewing this topic.

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
How reeds work?
« on: March 26, 2022, 09:48:50 AM »

A recent zoom conference has been recorded and posted online, with interesting perpsectives on how reeds work and what makes the sound quality of them:

https://www.youtube.com/watch?v=Hj4SGFSIllQ

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: How reeds work?
« Reply #1 on: March 27, 2022, 06:16:55 PM »

 Absolutely fascinating.
I am no expert but I suspect that there are many many factors involved in producing pure notes that  give that feeling of “warmth”.  Reeds may be the fundamental starting point but, I suspect that many other factors combine to release richness. The box construction and internal resonances must have an effect.

It was really interesting to hear what Lorenzo Antonelli said about reed chambers and matching. Also the concept of combination of reed, “wood and air” to make “the beauty of sound in its timbre”. A wonderful thought!
 
Really interesting …. just wanted to say thanks for highlighting.

John



« Last Edit: March 27, 2022, 08:47:44 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Michael Driscoll

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 145
Re: How reeds work?
« Reply #2 on: March 28, 2022, 02:43:20 AM »

 In short : is this Degree standard ? Is it available ?
This makes great reading. I shall have to find the time. The thing that struck me was that it appears that the instruction in Finland could go up to Degree standard , though I am not clear if this for accordion only. I am comparing this with my own studies as a full time Bakery student (very scientific - the course, not me!)and this is hard enough at probably school O’ level in the old days.
« Last Edit: March 28, 2022, 03:39:45 AM by Michael Driscoll »
Logged

Rick St. John

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 193
Re: How reeds work?
« Reply #3 on: March 28, 2022, 12:44:53 PM »

I can't get the video to play: "An error occurred. Please try again later"
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: How reeds work?
« Reply #4 on: March 28, 2022, 01:32:12 PM »

Odd, just checked and all was OK here.
Have you checked on another browser? Or after purging your browser's cache?

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: How reeds work?
« Reply #5 on: March 28, 2022, 01:43:03 PM »

It's working fine here.
It's fascinating, thank you for posting it.

I have just started making another set of reed blocks - so keen to watch, and hopefully learn, from this before carrying on . .
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: How reeds work?
« Reply #6 on: March 28, 2022, 02:14:19 PM »

yes very interesting. im currently experimenting with reedblocks designed on cut2dpro and created using a cnc router. So in theory have the option to vary all sorts of parameters......type of wood, depth of chamber at reed tip, depth of chamber at rivet end, overall volume of each chamber, shape of chamber corners and internal angles. The thing is where to start! ive studied as many blocks as i can. some use a constant chamber depth across all reeds and a constant depth from tip to rivet and at the other extreme some use a taper that varies in all dimensions......deeper chamber at rivet end which also varies on each reed /shallower chamber at reed tip which also varies on each reed....moreover some makers square off the reed chamber at the reed tip end and some angle it. Some old italian chambers are varnished. some are made from hardwood , some from softwood. some use wax and nails , some don't bother with the nails, some use wax and screws, others use leather or olivisk, and then of course there are leather and vinyl valves its all very interesting but alas im no wiser after watching the video. Everybody i talk to seems to come to the same conclusion...reedblocks are important but building an accordion is time consuming enough without trying 10 different reedblock designs! As the video concludes it needs further research but that needs funding and who would fund it? reed makers maybe?
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: How reeds work?
« Reply #7 on: March 28, 2022, 02:33:51 PM »

Ewen d'Aviau de Ternay, an accordion builder, has started a series of measurements on various acoustic parameters for reeds. I hope he'll publish results when he's done.

https://www.facebook.com/watch/?v=328376299359235

Rick St. John

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 193
Re: How reeds work?
« Reply #8 on: March 28, 2022, 04:33:16 PM »

Odd, just checked and all was OK here.
Have you checked on another browser? Or after purging your browser's cache?

I checked on a completely different computer, and on different days but got the same error

However, I've now tried with the YouTube app on a tablet and it works. Go figure
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: How reeds work?
« Reply #9 on: March 28, 2022, 05:48:03 PM »

From the German accordion technology book I have, the summary was that the reeds and the grill are about 80-90% of the sound. The reeds blocks relation to each other and the body around them can act like tone chambers and give unintended effects, is one conclusion i gather from some of what I have read.
Clearance between the reed and the plate is a HUGE factor and is the biggest difference you will notice.

Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How reeds work?
« Reply #10 on: March 28, 2022, 06:18:47 PM »

"Clearance between the reed and the plate is a HUGE factor"

Hence that business with nail varnish, of whatever it was? And 'coining'?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: How reeds work?
« Reply #11 on: March 28, 2022, 10:49:16 PM »

From what I have run into the nail polish is used to tune the reeds by lowering the note, this works but not well since it may flake off later or will gum your files/stone when you try to tune it.
 I have "staked" reed plates on badly made reeds on occasion. Here is one i did in the past. https://www.instagram.com/p/CBl6ur1Js49/
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How reeds work?
« Reply #12 on: March 29, 2022, 08:55:24 AM »

Thanks for those pics, Kimric. They prompted me to delve further.

I fear this may be drifting the thread, but tuning with nail polish wasn't what I was on about. A good while ago on here, there was some discussion about closing the clearance gaps by painting on some nail varnish/acrylic nail adhesive (or something relating to cosmetic nail stuff!) and then breaking the joint between the tongue and the plate and hence leaving only a tiny gap all around. It was probably about mouth organ reeds, if the truth be known. I've been searching for it, both on here and on the 'net in general, but cannot find any mention of it anywhere!

I'm sure I didn't dream it.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How reeds work?
« Reply #13 on: March 29, 2022, 09:01:11 AM »

I don’t think you dreamt it Winston.  It could have been an idea from Brendan Power, has has come up with many innovations for improving harmonica reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How reeds work?
« Reply #14 on: March 29, 2022, 09:36:19 AM »

Haha! Searching for 'Brendan Power' only brings up your post, Theo. But never mind, I'd probably never get to actually try it anyway.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How reeds work?
« Reply #15 on: March 29, 2022, 10:20:39 AM »

Well done, that man! Just searching Brendan Power on the laptop found the very video straight away:

https://www.youtube.com/watch?v=eQP6tZRXbTU&ab_channel=BrendanPowerMusic

It looks too easy and too cheap for me not to have a go, especially as my No I Daughter does nails at her beauty shop and no doubt will supply me with an old nail art pen or two.

Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: How reeds work?
« Reply #16 on: March 29, 2022, 01:53:42 PM »

I have "staked" reed plates on badly made reeds on occasion. Here is one i did in the past. https://www.instagram.com/p/CBl6ur1Js49/

Kimric, could you please explain to this thickie exactly what you did with your hammer and screwdriver? I can see that the gap between the reed and plate is tiny on the left, and I can see skid marks but am still at a loss. Thanks!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How reeds work?
« Reply #17 on: March 29, 2022, 02:17:28 PM »

Stiamh, did you click through onto the 2nd picture?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: How reeds work?
« Reply #18 on: March 29, 2022, 04:32:20 PM »

Stiamh, did you click through onto the 2nd picture?

Eeeek! Thank you Edward. Told you I was thick.  :D

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: How reeds work?
« Reply #19 on: March 30, 2022, 07:53:55 AM »

I chased the metal over using a metal jewelers screwdriver. Some reed plates are made of a harder aluminum that is more brittle and this does not work as well.
 Be sure to back the reed plate with a small anvil or block of steel.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal