Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: How reeds work?  (Read 2232 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How reeds work?
« Reply #20 on: May 02, 2022, 04:47:54 PM »

From the German accordion technology book I have, the summary was that the reeds and the grill are about 80-90% of the sound. The reeds blocks relation to each other and the body around them can act like tone chambers and give unintended effects, is one conclusion i gather from some of what I have read.
Clearance between the reed and the plate is a HUGE factor and is the biggest difference you will notice.

I've often wondered, and postulated here, how the tone of a particular accordion is created.  I've done some extensive experimenting in this regard, with some interesting observations.

For example, I had two Paolos Sopranis that in many ways were nearly identical.  They were both built to roughly the same dimensions (Irish-style 2-row), both had the exact same make of reeds (TAM Voci Armoniche), the exact same pitch and the same tuning, both had a metal soundboard, both had the same keyboard/pallet lever mechanisms, both were unvarnished inside, etc. And yet, the sound between the two could hardly have been different.  One had a very mellow, sweet tone, the other a very bright, somewhat harsh tone.  Changing the grill material, lining the grill with different layers of material, removing the grill entirely, etc had virtually no impact on the tone of either instrument; the overall sound was either more muffled or more clear depending on what was being used, but the overall tone, the character, the timbre, remained the same.  Modifications to the reed chambers, such as lining them with different material, made no difference.  In each instrument, I experimented with changing the reeds for something entirely different (while maintaining the same pitch and tuning), and I was surprised to discover that while there was a difference in reed response and feel, there was only a very *slight* change in tone, and that the vast majority of the tonal qualities of the box remained the same.  One was still sweet and mellow, and the other bright and harsh. 

To me, in those cases, it seemed that something like 80-90% of the tone of the box was the box itself, which could not be altered by changing the grill, or the interior/reedblock/reed chamber finishes, etc.  I've heard it said that the soundboard material makes a difference, and that wooden is 'sweeter' and metal a little more 'crashy' or 'tinny', and yet the above example does not seem to support that at all.  We've all heard it said that the casework material doesn't make any difference, and yet it's obvious that *something* does make a difference in the sound of a box, and I'm inclined to believe that it's a combination of several factors (APART from the reeds) including the construction material that creates the overall tone of a particular make of accordion.  It's all a bit of a maddening mystery...!
« Last Edit: May 02, 2022, 04:53:36 PM by mselic »
Logged
C#/D player

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: How reeds work?
« Reply #21 on: May 02, 2022, 05:24:46 PM »

The sound difference could be the profile of the reed. One of the main difference between handmade, hand finished, and machine reeds are the outer surface of the reeds.
 Machine reeds look like a shelf board if looked at from the end under a magnifying glass, hand finished and hand made reeds have a curvature on the outer face a bit like a cross section of a frisbee.
 On vintage reeds this can be really obvious and kind of amazing, on modern stuff it can sometimes be pretty hard to detect without a strong light and tilting the plate.
 This might be the difference or not.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How reeds work?
« Reply #22 on: May 02, 2022, 07:29:36 PM »

There are a couple of other variables you could check Mselic.  The size and shape of the vents in the reed block and the fondo, and how well they line up.  And how highly the pallets lift.  Either of these. Can affect the maximum volume and may alter the tone as well.

Something else I’ve often wondered about is the way the reed blocks are constructed.  In Paolo Sopranis it’s quite common for the central body of the block to be made of a solid block of timber with the reed chambers machined out with a cap and a sole plate glued on.  Other makes have the central section fabricated from a mid rub with chamber walls blued on.

I have no evidence either way, but it would be interesting to know if your two instrument have different reed block construction.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: How reeds work?
« Reply #23 on: May 06, 2022, 11:41:08 AM »

In a similar vein, does anyone know how the reed blocks in an Eric Martin are constructed? Are they ribs and walls or machined out of solid?

Its all very frustrating trying to understand where the particular tone of a particular box comes from. My experience was different to mselics when I had an opportunity to swap reed blocks between two identical model castagnaris, one walnut and the other cherry, which sounded very different to each other. However, when swapping the reed blocks of these the ‘sound’ very definitely stayed with the reeds and blocks.

I suppose ultimately it would be interesting to make a box of a standardised case size, construction methods and reed make & type- and then make two different sets of reed blocks by different methods, and then more reed blocks trying different woods, and then different fondo construction - ‘off the shelf’ aluminium vs laminated ply with slides built in vs solid wood . . . . . . Etc etc. It would take a Lifetime.
Every time I think I have a theory something comes along to suggest differently . . .
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How reeds work?
« Reply #24 on: May 06, 2022, 02:38:08 PM »

I did not change the reedblocks between instruments; I only experimented with changing the finish of the blocks (sanding down the varnish) and lining the chambers with a sound-absorbing material. These changes made no difference. I was going to say that I suspect that the actual design/dimensions of the blocks as well as the type of wood used in their construction is probably a factor. I suspect that if I built my own reedblocks for one of these instruments that there would be a difference in tone. And just to be clear, when I say ‘tone’ I’m not referring to volume or how clear/muffled the sound is; I’m referring to the particular character or timbre that is usually fairly consistent among a particular make/model.
Logged
C#/D player
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal