Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Cheapskate bellows  (Read 1441 times)

0 Members and 1 Guest are viewing this topic.

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Cheapskate bellows
« on: June 08, 2022, 07:31:48 PM »

I have had a go at making some new bellows for the box i made. Having cut down some bellows before for this box, in playing the box I thought the bellows folds were too wide having cut them down from a full size CBA, and they were leaky. My findings may be of use to someone wanting to do the same. I started it as a bit of an experiment with all materials except the tape from my recycling boxes.

The card is pizza and cereal boxes.
The corner ties are an old shirt
The leather is scrap offcuts
The cloth is a blackout blind i found in a skip, the other half is currently in use in my bathroom.
Corners are baked bean cans, took 3 cans to make all 80. I selected cans as they appear to be rust resistant and are the right colour.

It has turned out fine, there are 20 folds at 18mm each and is all airtight.
Things i will do differently next time
- damp the card before folding to prevent cracking, worked this out half way through
- think i will source some thicker or better card, i glued paper to the card to reinforce, and the blind material is really the reinforcement for the joints, it would be too flexible otherwise.
- build in the form slightly smaller, adding the cloth then the tape made the bellows larger than i planned, i could have added inserts to the form.
- i didnt check the form against the box so have ended with the bellows not exactly as i wanted size wise, a couple of mm out. Should have checked this before i started making the bellows.
- glues used for the processes could have been tested more before i started, the tacky pva i used really was not tacky enough to hold before clamping, and some of the cloth and ties had to be reglued, i ended up using a good quality spray adhesive for the cloth and contact adhesive for everything else except the metal corners which went on with pva.
- the corners i was still spoiling some even at the end of making 80. I am unsure how to rectify this.

Pleased with the result, works well and airtight so ended with what i set out for. I may cut the set down as dont need the full extension of the 20 folds and it looks a bit thick.

I think I will make another set but will play these in for a while.
-

« Last Edit: June 08, 2022, 07:39:51 PM by Gav Wood »
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Cheapskate bellows
« Reply #1 on: June 08, 2022, 07:36:46 PM »

More photos, last one is the form and corner bending device i made.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Cheapskate bellows
« Reply #2 on: June 08, 2022, 07:55:50 PM »

Super piece of work Gavin. No way am I going to find time to do something like that but I want to!

Interesting what you say about damping the card before folding. 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cheapskate bellows
« Reply #3 on: June 08, 2022, 08:13:33 PM »

Respect!  Bellows making is harder than it looks.

I rather liked the multicolour effect before you put on the black tape!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Cheapskate bellows
« Reply #4 on: June 09, 2022, 01:58:05 AM »

Terrific.  How did you make the corners?  Did you make a form first?
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Cheapskate bellows
« Reply #5 on: June 09, 2022, 12:57:03 PM »

Gav:
Cheapskate?
40 hours @ "love of melodeon wage" = 0
 :Ph
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Cheapskate bellows
« Reply #6 on: June 09, 2022, 01:20:51 PM »

I am mightily impressed.
Can we see your corner making, please?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Cheapskate bellows
« Reply #7 on: June 09, 2022, 01:40:46 PM »

Good job!!
I also curios how you made the corners?
Logged

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Cheapskate bellows
« Reply #8 on: June 09, 2022, 04:49:01 PM »

Who are you and what have you done with Winston aka Edward? >:E

Seriously though...excellent job :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Cheapskate bellows
« Reply #9 on: June 09, 2022, 06:22:44 PM »

Not up to Lester standard but this may answer some queries.

https://youtu.be/84_6s5SFOH8

Cut my finger a bit during that.

Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Cheapskate bellows
« Reply #10 on: June 09, 2022, 06:51:17 PM »

"Who are you and what have you done with Winston aka Edward?"

As much as I greatly admire the dedication and ingenuity involved, I don't have that sort of patience. I'd just look for something that I could afford, probably something second hand.
10/10 for Gav, though, well done!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: Cheapskate bellows
« Reply #11 on: June 09, 2022, 07:15:09 PM »

Bravo, Gavin.  You make it look simple.  I look forward to hearing the latest incarnation of the box. 
« Last Edit: June 09, 2022, 07:44:45 PM by CAB »
Logged
Pas de lieu Rhone que nous

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Cheapskate bellows
« Reply #12 on: June 09, 2022, 07:51:39 PM »

Not up to Lester standard but this may answer some queries.

My queries are mostly answered!  Excellent...your 'turning' block seems to be lined with a beefy strip of aluminum.  I'm assuming you made that in a similar way, hammering it on a vise.  Is it simply press fit into the wooden block?  Epoxied?
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Cheapskate bellows
« Reply #13 on: June 09, 2022, 08:50:39 PM »

I'm even more impressed now .
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

CAB

  • Mass Debater
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1147
    • Somerset Russets Village Band
Re: Cheapskate bellows
« Reply #14 on: June 09, 2022, 10:17:24 PM »

Heard a nice set of tunes on it tonight too - sounding good.
Logged
Pas de lieu Rhone que nous

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Cheapskate bellows
« Reply #15 on: June 09, 2022, 10:26:56 PM »

Gonk, the insert in the wood is a steel bracket, had a right angle and hole already, then bent over the aluminium insert and drilled the other side. If made of aluminium it may wear quickly as the bean can steel is harder than the aluminium. And the insert is the forming surface.

Glued in with whatever i had to hand, probably the contact adhesive.

 
« Last Edit: June 09, 2022, 10:31:30 PM by Gav Wood »
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Cheapskate bellows
« Reply #16 on: June 09, 2022, 10:47:41 PM »

Ah, makes sense, even better!  Really nice work, I'm inspired and impressed.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Cheapskate bellows
« Reply #17 on: June 10, 2022, 03:53:09 PM »

Being a professional bellows maker myself, I'm mightily impressed. Chapeau!
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Cheapskate bellows
« Reply #18 on: June 12, 2022, 04:48:44 PM »

"Not up to Lester standard but this may answer some queries.
https://youtu.be/84_6s5SFOH8
Cut my finger a bit during that. "

Impressive, so this is basically a inside out tubing bender.

Ar supply houses have card stock of varying thicknesses, as you probably found out the card stock has a bending bias that you work with. I used to make top hats and learned how to use this to advantage.
 You are correct about dampening the paper before forming.

For really sharp corners you can use menu corners but they have very little radius.

I am seriously impressed since making bellows is one thing I have not tried.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal