Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: amplification (not the mics)  (Read 1163 times)

0 Members and 1 Guest are viewing this topic.

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
amplification (not the mics)
« on: June 10, 2022, 01:58:46 AM »

So, tonight I played at a garden party again. Usually where I play there are sounds with their equipment, but sometimes I have to bring my own. I have used a bulky roland cube 50 always,... Sounds fine for those occasions, but it's quite heavy...and I never go over volume 2 of 10 😀


What would you guys use? I would like 2 inputs (or more), and the option for a bit of reverb on one of the channels. And i want the sound to be very natural

What do you use/suggest?
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: amplification (not the mics)
« Reply #1 on: June 10, 2022, 02:39:36 AM »

Whatever you get should be able to be set up on a tripod speaker stand.  Getting the speaker above peoples heads means you don't need a lot of volume.  Speakers on the floor cannot project sound well as the bulk of the sound energy will be absorbed by the bodies of the listeners/attendees.

You want projection, not volume.

Try shopping Thomann...
« Last Edit: June 10, 2022, 02:48:29 AM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: amplification (not the mics)
« Reply #2 on: June 10, 2022, 08:43:58 AM »

I'm not sure what the Roland 50 is, but I use a Roland CUBE street, for Morris, as do  a lot of the musicians I know. It's the busker's standard. Very portable, especially with the shoulder bag. Runs off AA batteries and they last a long time. It produces more than enough volume for outdoor events such as county shows (Royal Cornwall tomorrow, where we're usually up against Titan the robot, of recent TV fame   (:)). Digital effects built in include reverb and delay. Two inputs. Ideal for guitar and mic.

Our band has four or five of them, these days. We also use the a couple of the smaller Roland 10W amps, which are OK, but (I think) don't quite have the punch for a bigger space. Having said that, they never seem to be turned up flat out.

Note: The latest edition seems to be branded  BOSS. The BOSS-CUBE Street II.
https://www.roland.com/uk/products/cube_street/
https://www.boss.info/uk/products/cube_street_2/
« Last Edit: June 10, 2022, 12:58:15 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Stotty

  • Stotty
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 191
Re: amplification (not the mics)
« Reply #3 on: June 10, 2022, 06:55:24 PM »

I use a Roland AC33 with a Streb - it is fairly portable and punchy in terms of sound output when plugged in to the mains.  We played in a church at the weekend and it was adequate for that.   It has two inputs and the facility to use 8 x AA batteries, but the volume output is reduced when it is on the batteries.  There is reverb on at least one channel (although the Streb has on board variable reverb in any case) and a 40 second looping facility.  I think the AC33 is primarily designed for use with guitars, and I haven't really tried it with microphones as the Streb plugs straight in.  There is no "hole" in the bottom of the AC33 for tripod stand mounting, but it does benefit from being off the floor as Mr Rees points out (e.g. on a folding stand).   Weight I think is just under 5 kilos.

A band mate uses a Roland Street Cube Ex which is a bit "beefier" than the Boss Cube (and the AC33) .  It runs on the same removable 8 x AA battery pack as the AC33, and the owner has a spare pack for quick changes.  I guess that if I was in the market now i would probably look at a Street Cube Ex for the extra power on batteries if i could stretch to the extra cost.   It weighs couple of kilos more than the "normal"/Boss Cube and the AC33

Another band mate as an AER battery/mains unit for vocal and guitar - but that is up a notch in terms of price!
 
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: amplification (not the mics)
« Reply #4 on: June 10, 2022, 07:55:31 PM »


A band mate uses a Roland Street Cube Ex which is a bit "beefier" than the Boss Cube (and the AC33)

I was wondering if the Street CUBE ex is what the OP  is already using, as that's 50W, so might be described as a Roland 50. I found them a bit heavy to carry around.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Cooper

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 705
  • Gaillrd G/C/#,Casta Allain8 GC,Lofft CF, giord ad
    • Cooper's homepage
Re: amplification (not the mics)
« Reply #5 on: June 10, 2022, 11:35:00 PM »

Apparently what i use isn't called what i called it 🙂 i should check the real name. I picked it because it was mainly used for keyboard, which meant it had the least amount of "colouring". Most of the stuff you all mention is built for guitar+ voice. You don't think that matters in what your box will sound like? (Honest noob question)

My main issue isn't that i want to sound loud, but that i want to be able to play softly, and still be heard. 🙂, so sound quality is more important then actual loudness. Like i said..my current One can go up to volume 10, but in 10 years i don't think i ever put it over volume 2.
W
Logged
Please correct my English, it's been a while, and i like to learn.
And don't be so polite! I know i must be typing tons of stuff that a native speaker would say differently...please enlighten me.

www.wouterkuyper.nl
www.lirio.nl
www.trekzakacademie.nl

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: amplification (not the mics)
« Reply #6 on: June 11, 2022, 01:31:49 AM »

Apparently what i use isn't called what i called it 🙂 i should check the real name. I picked it because it was mainly used for keyboard, which meant it had the least amount of "colouring". Most of the stuff you all mention is built for guitar+ voice. You don't think that matters in what your box will sound like? (Honest noob question)

My main issue isn't that i want to sound loud, but that i want to be able to play softly, and still be heard. 🙂, so sound quality is more important then actual loudness. Like i said..my current One can go up to volume 10, but in 10 years i don't think i ever put it over volume 2.
W

"Roland 50" might well be what you've got. It's just that when I looked on Roland's site, the only 50W amp I could see was the Street CUBE ex, so maybe it's not a current  model.

The amp I use is the CUBE  Street. The power output isn't specified but it's very impressive for something that runs for about 15 hours off half a dozen AA batteries.  I have another 100W battery powered amp which sounds nowhere near as good. I never need to turn it up more then half way.

The Roland CUBE street is a very clean amp. The sound quality is excellent compared with anything else of it's kind on the market.

The effects are  aimed at singing guitar players, but don't let that put you off. You don't have to use them.  I use it with my melodeon without any of the effects turned on, except, maybe, a touch of reverb. We have a flute player (flautist?), two fiddlers and a whistle player using them. Our guitarist  and our mandolin player both use  Roland CUBE 10W amps, which are surprisingly effective for their size, but maybe not powerful for your needs.
 

I'm not sure what they cost these days, I paid £220 about three years ago. Worth every penny.

Its big brother, the 50W CUBE Street Ex is, also, a phenomenal amp: Built for a similar purpose. More powerful, but a lot more expensive, bigger, heavier so significantly less portable.

The CUBE 10W might suit  you, but I suspect it might not pack enough punch. Worth trying, though.

From your description of the gigs your doing I think the CUBE Street would suit your needs.

[but, as always, whatever you think might be right, try before buy]

« Last Edit: June 12, 2022, 08:08:15 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Jozz

  • Good talker
  • **
  • Offline Offline
  • Posts: 97
  • Greetings from the Netherlands!
    • Stichting Bon Artz
Re: amplification (not the mics)
« Reply #7 on: June 11, 2022, 12:46:21 PM »

My main issue isn't that i want to sound loud, but that i want to be able to play softly, and still be heard. 🙂, so sound quality is more important then actual loudness. Like i said..my current One can go up to volume 10, but in 10 years i don't think i ever put it over volume 2.
W

It all depends......

is the audience quiet, how far away are they, do you need to hear yourself well (mostly when you're a vocalist as well)... etc.

To a typical SMALL garden party (duo vocals + accordion) I will bring one powered acoustic amplifier on a stick. If the crowd is more than 50 people, it depends. Are they quiet? I bring one extra powered speaker on a stick. If they are talking, I will bring 600W over two speakers on sticks and 1 floorwedge. I can upscale this setup to around 200 people tops (outside with some kind of walls here and there, not an open field..)

If it needs to sound *NICE* I will bring my Acus speakers. If moist conditions apply, I will always bring my unpowered stuff and haul the powered mixer along. Another tip is to angle your speakers down towards the audience. This way you'll need less power to reach further, thus allowing you to play softer. Your MID/HIGH speakers or drivers should be at eye/ear level facing the crowd. One powered speaker on the floor, will only sound nice to the first few people directly at your feet.

I believe we have a mutual acquintance in NL: David Cornelissen. If we ever meet, we can discuss this in length. I have spend a LOT of time (way too much) on my amplification chain for various scenario's....

jozef
Logged
Stichting Bon Artz - We present and support authentic music and small-scale performance arts.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal