Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dodgy slides  (Read 1549 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Dodgy slides
« on: June 22, 2022, 06:19:51 PM »

Another unexpected problem with a one row.
I was having troubles with the tuning unless the pegs were firmly out so I dismantled everything to fit some magnets.
I was surprised to see the position of the slides. They won't open any more than this.
Should I try and improve this? How?
Leave it alone?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Dodgy slides
« Reply #1 on: June 22, 2022, 06:25:30 PM »

This can usually be fixed by screwing (or unscrewing) the stop button from the block at the top of the slide

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Dodgy slides
« Reply #2 on: June 22, 2022, 06:46:36 PM »

The screws have been removed completely Lester. The slides physically cannot open any more.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Dodgy slides
« Reply #3 on: June 22, 2022, 07:18:56 PM »

It looks to me that the slide ports are rectangular though the fondo ports are round.....in some of the holes I can see both cheeks of the slide ports- or is that a trick of the light?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Dodgy slides
« Reply #4 on: June 22, 2022, 07:22:17 PM »

It’s probably the wooden block fixed to the end of the slide that is preventing full movement.  Possible fixed in the wrong position during a previous repair.  The blocks are difficult to re-fix, so I suggest shaving off wood with a very sharp chisel from the side of the block that makes contact with the case.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Dodgy slides
« Reply #5 on: June 22, 2022, 07:33:42 PM »

It is indeed the wooden blocks. It all appears very original.
It looks like the mahoosive chisel is the answer and I might even have to trim a little channel for the top of the metal slide to seat in.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Dodgy slides
« Reply #6 on: June 23, 2022, 10:27:00 AM »

Picture of the misaligned blocks. I've slid leather underneath to minimise and bending when I apply the chisel.
Only 2 or 3 mm but it might make all the difference.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Dodgy slides
« Reply #7 on: June 24, 2022, 06:20:53 AM »

I’m curious to know if it does make a noticeable difference, if you manage to do the recommended chisel work. I’ve seen the odd instrument with mismatched fondo holes versus reed block holes, most notably a Castagnari, where one was round and the other was square (I forget which way around). Obvs the airflow isn’t perhaps what ..erm..it could be. But how much of a difference would it make if they were optimised? (Ans…dunno).
The problem with sliders not operating as you expect is often when they don’t close completely (ok…on a PA normally) and you get ghosting reeds.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Dodgy slides
« Reply #8 on: June 24, 2022, 07:57:58 AM »

I will report back. I've chiselled off the offending bits and the holes are now fully open.
I took off the keyboard and mechanism so the front face was flat; it certainly made drilling for the tiny magnets a lot easier.
I have to completely refinish this box so it'll be at least a week before reassembly. Gloss white is not the nicest finish, though distinctive!
Octaves were spot on before, so tuning will be easy to check.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Dodgy slides
« Reply #9 on: June 24, 2022, 09:27:10 AM »

...I have to completely refinish this box so it'll be at least a week before reassembly. Gloss white is not the nicest finish, though distinctive!...

Do you have a plan for the new improved surface finish?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Dodgy slides
« Reply #10 on: June 24, 2022, 09:38:49 AM »

Black.
And red, maybe.....the gold ends had been painted over.
Progress so far.
« Last Edit: June 24, 2022, 09:46:50 AM by Squeaky Pete »
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Dodgy slides
« Reply #11 on: June 24, 2022, 10:11:04 AM »

The penguin lives  :D
Looking forward to seeing it all come together.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

windybutton

  • Member
  • *
  • Offline Offline
  • Posts: 32
Re: Dodgy slides
« Reply #12 on: June 25, 2022, 03:39:00 AM »

Interesting texture on the fondo pic
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Dodgy slides
« Reply #13 on: July 01, 2022, 03:08:06 PM »

I’m curious to know if it does make a noticeable difference, if you manage to do the recommended chisel work. I’ve seen the odd instrument with mismatched fondo holes versus reed block holes, most notably a Castagnari, where one was round and the other was square (I forget which way around). Obvs the airflow isn’t perhaps what ..erm..it could be. But how much of a difference would it make if they were optimised? (Ans…dunno).
The problem with sliders not operating as you expect is often when they don’t close completely (ok…on a PA normally) and you get ghosting reeds.
Mostly there is no difference, but the lower ,most air hungry, L reeds seem a little sharp now.  As you might expect.
An unexpected bonus is the very high H reeds were a tad flat and I was just going to live with it but they seem spot on now.
Also the box sounds brighter and feels alive in my hands. I'm very happy with the sound.
Will post something when the badges arrive. Shh.....
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Dodgy slides
« Reply #14 on: July 07, 2022, 09:24:50 AM »

The penguin lives  :D
Looking forward to seeing it all come together.
Meet Dennis. Not a penguin.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal