Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fitting high quality reeds in Hohner Erica  (Read 1282 times)

0 Members and 1 Guest are viewing this topic.

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Fitting high quality reeds in Hohner Erica
« on: July 12, 2022, 01:05:24 PM »

Hi.
Can anyone say if it is worthwhile fitting high quality reeds (eg: Binci) in  a Hohner Corso. I wish to convert a Corso C/C# to C#/D. Do good reeds produce a better sound?
Thanks
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Fitting high quality reeds in Hohner Erica
« Reply #1 on: July 12, 2022, 01:57:52 PM »

High quality reeds tend to be more responsive than those of lesser quality, but sound or 'tone' is very much subjective and down to personal preference.  The sound of an accordion is a combination of the reeds and the construction of the box itself; the same reeds will sound differently from one make of accordion to another.  I don't think anyone can say that putting Binci reeds in a Hohner Corso will produce a 'better' sound, just different, although reed performance and response will likely be better.  Personally, I wouldn't put anything but Hohner reeds in a Hohner!
Logged
C#/D player

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Fitting high quality reeds in Hohner Erica
« Reply #2 on: July 12, 2022, 03:10:18 PM »

Thank you very much for your reply. I like the tone and response of the hohner reeds.  I am not sure about how to get hold of a set of D reeds to match the existing C# reeds.
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Fitting high quality reeds in Hohner Erica
« Reply #3 on: July 12, 2022, 06:24:15 PM »

I have a set of Castagnari Matris reeds ( x2 voice ) in an immaculate 1930's Hohner Vikitoria.  I came across the entire Matris set, treble and bass in Fb/Bb on Italian Ebay for about €150 on a random 'Monday morning' search for 'low note' reeds.   Still not sure whether it was a good price but instinct suggested it was for blocks containing 33 pairs of 'TAM' treble reeds and an 18 bass/chord set up in x3's.

I had paid about £40 (+) for '3' new TAM Italian reeds to de-club a Socin, via a hard to find source for so few plates. 

Whether the Viktoria sounds "better" or anything like a Castagnari I don't know.  I know I would never be able to afford a random tuned Castagnari ( or other brand TAM reeded Box ) for my own amusement ( which is what the low tone Box is for ) but "all in" it rounded out at a couple of hundred pounds so a fill and a half of fuel at todays prices and I know which brings more solace.

By whatever good fortune, the treble side reed blocks fit the Hohner without modification although the 'half-row' of the Viktoria has too few spaces for the 10x, third row Matris block and the Casta Bass and Chord reeds had to be fitted to the Viktoria blocks to make it work.   

Needless to say the Castagnari tone is much 'drier' than the original Hohner tone and I would not expect the good luck re the 'fit' to extend to many / most models/makes.

I like the tone and think it works well enough within the ongoing restrictions of my (in)ability to play..... 
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Fitting high quality reeds in Hohner Erica
« Reply #4 on: July 12, 2022, 07:19:53 PM »

Quote
Thank you very much for your reply. I like the tone and response of the hohner reeds.  I am not sure about how to get hold of a set of D reeds to match the existing C# reeds.

Hohner reedplates should be available from Hohner (Europe) or Charlie Marshall (CGM Musical Services).  And/or maybe put a want ad in the Buy and Sell here.   
Logged

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Fitting high quality reeds in Hohner Erica
« Reply #5 on: July 13, 2022, 08:07:01 AM »

.....and worth bearing in mind the € is - if not in free fall - at a low rate currently, €1 = $1 and €1 = 84p.  It was well into the the 90's ( to the £ ) not so long ago & nearly at 1 for 1.

It makes it a 'decent' time to be buying in from the EU - whether Hohner or Italian until the £ catches it's own 'cold', which it probably will.  The buying/carriage/Vat isn't necessarily the minefield some would have us believe ( although it can need some managing ). 
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Fitting high quality reeds in Hohner Erica
« Reply #6 on: July 13, 2022, 08:34:24 AM »

On buying reeds…this is my experience (note: other's experience may vary). It’s possible to buy sets of reeds from CariniDena, at reasonable prices. Also, with some effort, from Cagnoni. The OP"s biog shows Kilkenny so he won’t have import issues. You will most probably need to tune them a bit, although new sets of reeds tend to be tuned with a concert reed and a sharp reed (nb: if they come from Italy the concert reed will probably be sharper than A=440Hz , probably A=442Hz) If they are 'dry' and you prefer more tremolo then some tuning will be needed. Also, they may not fit your reed blocks exactly, so some minor mod might be necessary (either to enlarge or to shrink the reed chamber…this is mostly likely to be on the bass side). One other thing… check the bass side requirement carefully,  coz this is where you may find some issues with non Hohner reed sets.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fitting high quality reeds in Hohner Erica
« Reply #7 on: July 13, 2022, 08:45:49 AM »

I’ve been playing a Hohner Club 2 that I fitted with Cagnoni TAM reeds about15 years ago.  It is a delight to play,  a little more responsive than Hohner reeds, and a slightly different sound.  I like the dound but whether you consider it “better” is a matter of personal preference.  Mine is tuned with a strong swing, again my preference.
IMHO new reeds always need to the tuned after fitting.  They will sound ok-ish as supplied, but so much better when accurately tuned in the box. 
Hohner reed blocks will need some modification to accept Italian reeds which are usually a little longer, especially the lower pitches.  Hi
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Seamus Kerans

  • Member
  • *
  • Offline Offline
  • Posts: 24
Re: Fitting high quality reeds in Hohner Erica
« Reply #8 on: July 19, 2022, 04:04:08 PM »

I think Conor Connolly has this done to his Hohners, I'm sure some of the people on here probably know his set up better than me and might be able to give a more educated comment.
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Fitting high quality reeds in Hohner Erica
« Reply #9 on: July 19, 2022, 04:42:46 PM »

I met Conor for a few tunes earlier this year, and his purple C#/D pre-Corso was set up with new Harmonikas A Mano.

I've done up a few of these old 3 voice Hohners and Corsos, and to be honest, the ones with Hohner reeds have sounded the best. Others might have a different opinion, but to my ears, there was something special about the timbre. The ones with new reeds did sound good too, and Conor is a good example of a player who makes it sing.

It's just hard to find Hohner reeds in the right keys, and availability is an issue to consider.
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Fitting high quality reeds in Hohner Erica
« Reply #10 on: July 19, 2022, 07:17:00 PM »

I believe you can currently get a full set of C#/D reeds treble and bass, mounted on blocks  directly from Hohner for around 150 Euros plus postage. they will of course require some fine tuning but probably the most cost effective way of getting suitable reeds barring finding some second hand.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Fitting high quality reeds in Hohner Erica
« Reply #11 on: July 19, 2022, 07:25:23 PM »


I believe you can currently get a full set of C#/D reeds treble and bass, mounted on blocks  directly from Hohner for around 150 Euros plus postage. they will of course require some fine tuning but probably the most cost effective way of getting suitable reeds barring finding some second hand.
https://www.hohner-cshop.de/en/Akkordeon/Diatonic/2-row/Erica/REEDBLOCK-cpl-treble-halfnote-Erica.html
https://www.hohner-cshop.de/en/Akkordeon/Diatonic/2-row/Erica/REEDBLOCK-cpl-Bass-chord-Erica.html
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal