Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellows diamond corners thickness  (Read 430 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Bellows diamond corners thickness
« on: July 27, 2022, 04:13:23 PM »

The title says it all.
What sort of thickness is the leather on bellows corners?
And what sort of thickness for repairs?
I use a non-waterproof PVA for a lot of work. It doesn't dry crispy hard. Is this suitable for both construction and repairs.
I've searched the archives for answers but gave up and went for a ride on the bike. Now I'm back I want answers!    ;-)
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows diamond corners thickness
« Reply #1 on: July 27, 2022, 05:22:29 PM »

For repairs patching the original I try to use the thinnest I can find.  I‘ve been using a kid skin of about 0.2mm.  Very soft and airtight.  For replacements just get them ready made from Charlie Marshall
http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html#14
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Bellows diamond corners thickness
« Reply #2 on: July 27, 2022, 05:24:56 PM »

The average bellows gusset measures about 0.4 mm in thickness, some may be a little thicker or thinner. The glue you mention is probably not much different from the PVA book binder's glue I'm using (also under metal corners, bellows tape and between bellows and frames).
« Last Edit: July 27, 2022, 05:26:58 PM by diatonix »
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Bellows diamond corners thickness
« Reply #3 on: July 27, 2022, 05:49:55 PM »

Thanks diatonic and Theo.
Just what I need.
A friend dropped off a bodged up ancient one row that has had modern set of Hohner reeds grafted in and it still has holes in the gussets big enough to push a pencil through. This will be further bodged by me with leather patches from inside
Also i have a BbEb Preciosa that I just turned a replacement button for ready to tackle the bellows re-taping. Then I counted upward of 16 holes in gussets and thought it's time to try making bellows.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal