Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: surface cleaning  (Read 650 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
surface cleaning
« on: July 31, 2022, 10:40:14 AM »

What substance can be used to clean / polish this ??
Logged

Dennis Steckley

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
  • Club System!
Re: surface cleaning
« Reply #1 on: July 31, 2022, 02:46:54 PM »

Personally, I would use a slightly dampened cloth, dampened with Murphy's Oil Soap in water.  If need be, wipe dry, but if the cloth is only slightly dampened, you may not need to.  No need to rinse MOS off. 

I would follow that with the beeswax spray recommended by Liberty Bellows in Philadelphia (google for their website).  Since it's an aerosol, I'd spray it on a cloth to avoid overspray.

As always, YMMV.

Dennis S.
Logged
Hohner Victoria Club ii, Hohner Club III M, Hohner Liliput, Hohner Preciosa, Hohner Piccoletta, Hohner Overture LMMM (and three PA's, including one that is the same size as a Preciosa)

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: surface cleaning
« Reply #2 on: July 31, 2022, 04:14:57 PM »

I use T-Cut (the original stuff) paint restorer, which is a liquid abrasive. It works on celluloid and french polish lacquer as well. Though don’t rub too hard because it does remove layers of paint.
« Last Edit: July 31, 2022, 04:16:36 PM by RogerT »
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: surface cleaning
« Reply #3 on: August 01, 2022, 02:27:16 AM »

Many thanks for the good advice...   (:)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal